Fox 55DLE988 User manual

2
SAFETY INSTRUCTIONS
1. Read Instructions All the safety and operating instructions should be read before the appliance is
operated.
2. Retain Instructions The safety and operating instructions should be retained for future reference.
3. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered
to.
4. Follow Instructions All operating instructions should be followed.
5. Water and Moisture The appliance should not be used near water.
6. Cart and Stands The appliance should only be used with a cart or stand that is recommended by
the manufacturer.
7. Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8. Ventilation The appliance should be well situated so that its location or position does not
interfere with its proper ventilation.
9. Heat This appliance should be placed away from heat sources such as radiators, heat registers and
stoves.
10. Power Sources The appliance should only be connected to a power supply as described in the
operating instructions or as marked on the appliance.
11. Grounding or Polarization Precautions should be taken.
12. Power Cord Protection Power supply cord should be routed so that it is not likely to be walked
on, pinched by items placed upon it against the cord and its end.
13. Cleaning The appliance should be cleaned only as recommended by the manufacturer.
14. Power Line An outdoor antenna should be located away from power lines.
15. Outdoor Antenna Grounding If an outside antenna is connected to the receiver, the antenna
system must be grounded so as to provide against voltages and built up static charges.
16. Non-use Periods The power cord of the appliance should be unplugged from the outlet when left
unused for a long period of time.
17. Object and Liquid Entry Care should be taken so that objects did not fall, and liquids are not
spilled into the enclosure through openings.
18. Conditions requiring Service The appliance should be serviced by qualified service personnel
when:
• The power supply cord or the plug has been damaged.
• Objects have fallen on or liquid has been spilled into the appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate normally or exhibits a marked change in performance.
19. The ventilation should not be impeded by covering the ventilation opening with items,
such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
The apparatus shall be connected to mains socket outlet with a protective earthing connection.
The appliance coupler regard as disconnection device, the disconnect device shall remain readily
operable.

4
CONTENTS
SAFETY INSTRUCTIONS
1 - 3
DESCRIPTION OF CONTROL KEYS & CONNECTORS
OPERATION OF REMOTE CONTROL
CONNECTIONS
OPERATION OF FUNCTION MENU
TROUBLE SHOOTING GUIDE
SPECIFICATIONS
5 - 6
7 - 8
9
10 - 19
20
21

13
OPERATION OF FUNCTION MENU
1.3) • In the second screen, press the button to shift the focus to the small icon at
the bottom and press the ► button to switch to the third screen.
• Press the ▲ button to switch the focus to the top of the three large icons,
press the ◄ / ► + OK button to enter the corresponding item, you can
browse the classified video, audio, pictures.
▼

14
OPERATION OF FUNCTION MENU
2.BINPUT SOURCE
3.TV SETTING
3.1 Picture Setup
Press <Menu> to display the main menu, then press ◄ / ► to select the Picture,
press ▲ / ▼ to select the corresponding option, press <Exit> to exit the menu.
• Picture mode: Select the picture mode, when set to user mode, the user can
customize the brightness, contrast, chroma, hue and sharpness and other effects
parameters.
• Color Temperature: used to set the color temperature you feel comfortable,
including standard, warm, cold three modes.
• Aspect Ratio: Set the user's favorite aspect ratio mode.
• Noise Reduction: used to reduce noise to improve picture quality.
• MPEG NR: used to smooth the video screen to reduce noise to improve image
quality.
Press <SOURCE> to display the source menu.
Press ▲ / ▼ to select the corresponding input source, and then press <OK> to confirm.

15
OPERATION OF FUNCTION MENU
3.2 Sound Setup
Press <Menu> to display the main menu, then press ◄ / ►to select the Sound,
press ▼ / ▲ to select the corresponding option, press <Exit> to exit the menu.
• Sound Mode: Select the sound mode, when set to user mode, the user can according to
theirfavorite bass and trebleto adjust.
• EQ settings: Click the eq setting to enter the submenu to adjust the gain of
thecorresponding frequency sound, theadjustment range is 0 100.(Optional in user mode)
• Balance: adjust the speaker sound output balance, adjust the range of 0 100.
• Auto Volume: Turn on / off the automatic volume control, when the volume exceeds the
setvalue, will automatically reduce the volume amplitude, protect the amplifier.
• AD Switch: designed for people with visual impairment, you can make up for the lack
ofvisual impairment throughthe sound, open the AD volume can also be adjusted.
• Hearing Impaired: designed for people with hearing impaired, open will mark whether
tospeak for the narration, willraise this is the sound of water, open the door, laughter,
and so on.
• Surround: Select the surround sound mode (off / on).
• SPDIF Mode: Select Coaxial/Optical Output Mode.

16
OPERATION OF FUNCTION MENU
3.3 Channel setup
Press <Menu> to display the main menu, then press ◄ / ► to select the Channel,
Press ▼ / ▲ to selectthecorresponding option, press <Exit> to exit the menu.
• Antenna Type: Select the antenna type.
• LCN: Whether to open the logical channel number sort.
• Auto Tuning: click on the automatic search into the sub menu, you can select the
automatic search type, click on the corresponding country to automatically search
the page.
• DTV/ATV Manual Tuning: click to sub menu, manual search can be based on
their own settings to search program channel, when the search to stop.
• Program Edit: Click to enter the submenu, there are four shortcuts, by pressing
▼ / ▲ to select the channel you want to operate, you can delete the selected
channel, move, jump and increase ordelete the channel to the favorite program
list operating.
• Signal Information: Displays information about the signal.

17
3.4 Setting
Press <Menu> to display the main menu, then press ◄ / ► to select the Setting,
Press ▼ / ▲ to selectthe corresponding option, press <Exit> to exit the menu.
• Audio Language : Set the Audio Language.
• 2nd Audio Language : Set the 2nd Audio Language.
• Subtitle : Turn on/off Subtitle.
• Subtitle Language: Set the first language of the subtitle.
• 2nd Subtitle Language : Sets the second language of the subtitle.
• Teletext Language: Sets the language of teletext.
• PVR File System: Click to enter the submenu, you can select the appropriate disk, time
forward length,format and speed test.
• Blue Screen： Turn on/off Blue Screen.
• Reset: Click will pop up a dialog box, choose whether to restore to the default settings.
OPERATION OF FUNCTION MENU

18
OPERATION OF FUNCTION MENU
3.5 Time
Press <Menu> to display the main menu, then press ◄ / ► to select the Time, press
▼ / ▲ to select thecorresponding option, press <Exit> to exit the menu.
• Sleep time : Set the system sleep time.
• Menu Time : Setting menu display time.