LG 55LF595T User manual

Network Settings
1 Press the (Home) button on the remote to
access the Home menu. Highlight the
(Settings) icon and select by pressing the
Wheel (OK) button on the remote.
2 Highlight the (Advanced) icon and select
by pressing the Wheel (OK) button on the
remote.
Advanced
3 Select the Network → Wired Connection
(Ethernet) or Wi-Fi Connection.
Picture
NETWORK
TV Name
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Not Connected
Wi-Fi Direct
LG Connect Apps
Sound
Programmes
Network
General
Safety
Accessibility
LG webOS TV
4 The device automatically tries to connect to the
network available (wired network first).
When you select the Wi-Fi Connection, the
network list available is displayed. Choose the
network you wish to use.
Picture
WI-FI
Network /
WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced settings
Sound
Programmes
Network
General
Safety
Accessibility
For wireless AP (Router) that have the
symbol, you need to enter the security key.
5 If the connection is successful, the "Connected
to Internet" network is displayed.
Picture
NETWORK
TV Name
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Connected to Internet
Wi-Fi Direct
LG Connect Apps
Sound
Programmes
Network
General
Safety
Accessibility
LG webOS TV
You can check the status of connection in
Advanced settings.
Picture
WI-FI
Network /
ꔐWI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced settings
Sound
Programmes
Network
General
Safety
Accessibility
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS(Operating System).
* App icon positions may vary on the platform, depending on the software version.
SMART TV Quick Setup Guide
www.lg.com
P/NO : MBM65203242 (1504-REV00)
Printed in Korea
*MBM65203242*

Troubleshooting Network Problems
1 Press the (Home) button on the remote to
access the Home menu. Highlight the
(Settings) icon and select by pressing the
Wheel (OK) button on the remote.
2 Highlight the (Advanced) icon and select
by pressing the Wheel (OK) button on the
remote.
Advanced
3 Select the Network →Wired Connection
(Ethernet) or Wi-Fi Connection → Advanced
settings.

Picture
NETWORK
TV Name
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Not Connected
Wi-Fi Direct
LG Connect Apps
Sound
Programmes
Network
General
Safety
Accessibility
LG webOS TV
Picture
WI-FI
Network /
ꔐWI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced settings
Sound
Programmes
Network
General
Safety
Accessibility
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
1Check the connection status of the TV, AP
(Router).
2Power off and power on the TV, AP (Router).
3If you are using a static IP, enter the IP directly.
4Contact internet service provider or AP (Router)
company.
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
1Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2Initialize (Reset) the AP (Router).
3Contact internet service provider or AP (Router)
company.
When X appears next to DNS:
1Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2Initialize (Reset) the AP (Router).
3Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
4Check the AP (Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.

SmartShare PC SW Installing & Setting
1 Install the SmartShare PC SW program on your PC.
2 Go to www.lg.com. Then, select your region.
3 Select SUPPORT. Then, search for your model.
4 Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW.
5 You can run the program when installation is complete.
NOTE
ySmartShare service is only available if TV and other devices are connected via a single AP (Router).
SmartShare Connection to Smartphone
Updating the TV Firmware
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes.
1 (Home) →(Settings) → (Advanced) →General → About This TV →
CHECK FOR UPDATES
2 After checking the version of the software, update it.
If you check the "Allow Automatic Updates", you can update the software automatically.
Picture
GENERAL
Language
Location
Time Date
Timers
TV Power Settings
Standby Light ꕍ
On
Home/Store Mode
Eco Mode
SIMPLINK
Settings Help ꕍ
On
Reset to Initial Settings
About This TV
Sound
Programmes
Network
General
Safety
Accessibility
Picture
ABOUT THIS TV
General /
Software Version xx.xx.xx
CHECK FOR UPDATES
Allow Automatic Updates
TV Information
LG webOS TV
Customer Service
xxx-xxx-xxx
User Agreements
Legal Notice
Open Source Software Notice
Sound
Programmes
Network
General
Safety
Accessibility

1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must
on the same local network.
2 Install/run the app for sharing content on your smartphone (It's called SmartShare on
LG phones).
3 Enable your smartphone to share content files with other devices.
4 Open SmartShare application. (Home) →SmartShare.
5 Select the file type you want to play (movie, audio or photo).
6 Select a movie, music or photo file to play on the TV.
7 Play the media file to view and enjoy it on your TV.

Miracast allows a portable device to securely send video and sound to the TV wirelessly.
/(INPUT) →Screen Share
1 Miracast should be set to "ON" on your portable device.
2 When your TV is detected, select the device on your portable device.
When connection is completed, the device screen appears on the TV screen.
Miracast Setting
WiDi (Wireless Display) Setting
Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet
network for mirrored and dual monitor display on your TV. You can sit back and experience your favorite
movies, videos, photos, online shows and more in full HD on your TV with great image clarity and sound.
/ (INPUT) → Screen Share
1 Intel's WiDi is set to On. Connect your laptop to AP (Router). (Without AP, it is possible to use this function;
it is recommended to connect to AP.) Your laptop runs the Intel WiDi program.
2 It detects LG webOS TVs available, which supports WiDi. In the list, select the TV you want and click
Connect. Enter the number shown on the screen into the input field ( ) on your laptop and then click
Continue.
Notebook Screen
3 The laptop screen appears on the TV screen. The wireless environment may affect the screen display.
If the connection is poor, the Intel WiDi connection may be lost.
* LG TVs do not need to register.
* For more information on Intel WiDi, visit http://intel.com/go/widi .
* You can control your PC using the Magic Remote.
Wi-Fi Direct Setting
(Home) →Settings) →
Advanced) →Network →Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the
TV using Wi-Fi Direct.
With SmartShare, you can share files or screens of devices connected to Wi-Fi
Direct.
1 When you open Wi-Fi Direct menu, a list of available devices appears.
2 When you are prompted to request connection, select Yes. Wi-Fi Direct is now
connected to your TV.
Please call LG Customer Service if you experience any problems.
Picture
WI-FI DIRECT
Sound
Programmes
Network
General
Safety
Accessibility
REFRESH LIST
Network /
ꔐWI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE