Hisense N3000 User manual

9
Making Connections
HEADPHONE Connect Headphone for audio out of the TV.
Headphone (not included)
ANT Connect an outdoor VHF/UHF antenna or cable.
ANT Connecting a satellite antenna.
Outdoor
Antenna
Antenna Cable (75Ω)
or ANT OUT
Cable
VHF/UHF Antenna
(not included)
(not included)
TV JACK
HEADPHONE
TV JACK
ANT 1
DVB-T/T2/C
TV JACK
ANT 2
DVB-S/S2
DIGITAL AUDIO OUT Connect to an external digital audio device.
Before connecting a digital audio system to the DIGITAL AUDIO OUT jack, you
should decrease the volume of both the TV and the system to avoid that the
volume suddenly becomes bigger.
TV JACK Audio Amplier/Speaker
DIGITAL
AUDIO OUT
DIGITAL AUDIO cable (not included)

10
Making Connections
USB
Connect the USB devices such as hard drives, USB sticks and digital cameras for
browsing photos, listening music and watching recorded movies.
NOTES
When connecting a hard disk or a USB hub, always connect the mains
adapter of the connected device to the power supply. Exceeding a total current
consumption may result in damage. The USB1.1 and USB2.0 devices maximum
current consumption are 500mA. The USB3.0 device maximum current
consumption is 1A.
For individual non-standard high-capacity mobile hard disk, if it's impulse current
is greater than or equal 1A, it may cause TV-rebooting or self-locking. So the TV
does not support it.
The USB port supports a voltage of 5V.
COMMON INTERFACE
Insert the CI+ module for watching scrambled services like pay-tv channels or
some HD channels.
SMART CARD
CAM CARD
TV JACK
12
NOTES
Before you insert/remove the CI+ module, ensure that the TV is switched off.
Then insert the CI card into the CI+ module in accordance with the Service
Provider’s instructions.
Do not repeatedly insert or remove the Common Access Module as this may
damage the interface and cause a malfunction.
You must obtain a CI+ module and card from the service provider of the
channels you want to watch.
Insert the CI+ module with the SmartCard in the direction marked on the module
and SmartCard.
CI+ is not supported in some countries and regions; check with your authorized
dealer.
TV JACK
DC 5V 0.5A(MAX)
USB 1 USB 2
DC 5V 1A(MAX)

11
Making Connections
AV IN Connect the composite cable from an external A/V Device.
Use the audio and video cables to connect the external A/V device’s composite
video/audio jacks to the TV’s jacks. (Video = yellow, Audio Left = white, and Audio
Right = red)
COMPONENT IN Connect a component cable and an audio cable from an external
A/V Device.
The component output ports Y, PBand PRon the VCD or DVD can sometimes be
identified as Y, CBand CR.
Yellow(Video)
(not included)
(not included) White(L)
(not included) Red(R)
TV JACK
VCR/DVD Player/
Recorder/Set-top box/
Satellite Receiver/Video Camera
Video L
A/V OUT
R
Y
VIDEO
PB
L
PR
R
AV IN
COMPONENT IN
(not included)
RL PRPBY
Component
(not included) Blue(PB/CB)
Green(Y)
(not included) White(L)
(not included) Red(R)
(not included) Red(PR/CR)
TV JACK
Y
VIDEO
PB
L
PR
R
AV IN
COMPONENT IN
VCR/DVD Player/Recorder/
Set-top box/Satellite Receiver/
Video Camera