FOXEER Monster User manual

1. STD
Press the MENU to set camera
brightness. It has “LOW” , “MIDDLE” ,
“HIGH” three modes for choice.
1. AUTO
“SLOWSHUTTER” has several
options : AUTO, 1X, 2X, 3X, 4X, 5X,
6X, 7X, 8X, 9X.
Higher “SLOWSHUTTER” value,
brighter image at night, but heavier
ghost eect.
2. MANUAL
“SHUTTER SPEED” can select from
1/50 to 1/100000.
Move the cursor to“SHUTTER
MODE” , press the LEFT/RIGHT to
select “AUTO” or “MANUAL” . Camera
normally works on “AUTO” mode.
2. BLC
1. EXPOSURE
2. SHUTTER MODE
Move the cursor to "EXPOSURE" , press the LEFT/RIGHT button to
select “STD” or ”BLC” mode.
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
“AGC” can adjust the peak value, the
bigger value, the brighter image,
cause bigger noise, there are“ON”or
“OFF”optional by LEFT/RIGHT
according to actual needs.
3. AGC
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
SLOWSHUTTER
SHUTTER MODE
AUTO
RETURN
It can restore the authenticity of the
color when it is aected by the
temperature change. The user can
choose dierent white balance
mode accordingly, “ATW1” , “ATW2”
“ATW3” .
4. AWB
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
When the IMAGE is displayed on the
screen, it allows you to do settings
of image function and details.
5. IMAGE ADJ
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
SLOWSHUTTER
SHUTTER MODE
9×
RETURN
SHUTTER SPEED
SHUTTER MODE
1/100000
RETURN
BRIGHTNESS
STD
LOW
RETURN
INTENSITY
BLC
LOW
RETURN
AGC
RETURN
MODE OFF
MIDDLEINTENSITY
IMAGE ADJ
HDNR
3DNR
20/100
75/100
52/100
55/100
CONTRAST
SATURATION
RETURN
NEXT
SHARPNESS 80/100
“SHARPNESS”is used to adjust
overall image sharpness, can set
from 0-100, the higher value, the
sharper image.
1200TVL 16:9 Widescreen Camera
LEFT/RIGHT
Press the MENU to set camera
intensity. It has “LOW” , “MIDDLE” ,
“HIGH” three modes for choice.
22

1. STD
Press the MENU to set camera
brightness. It has “LOW” , “MIDDLE” ,
“HIGH” three modes for choice.
1. AUTO
“SLOWSHUTTER” has several
options : AUTO, 1X, 2X, 3X, 4X, 5X,
6X, 7X, 8X, 9X.
Higher “SLOWSHUTTER” value,
brighter image at night, but heavier
ghost eect.
2. MANUAL
“SHUTTER SPEED” can select from
1/50 to 1/100000.
Move the cursor to“SHUTTER
MODE” , press the LEFT/RIGHT to
select “AUTO” or “MANUAL” . Camera
normally works on “AUTO” mode.
2. BLC
1. EXPOSURE
2. SHUTTER MODE
Move the cursor to "EXPOSURE" , press the LEFT/RIGHT button to
select “STD” or ”BLC” mode.
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
“AGC” can adjust the peak value, the
bigger value, the brighter image,
cause bigger noise, there are“ON”or
“OFF”optional by LEFT/RIGHT
according to actual needs.
3. AGC
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
SLOWSHUTTER
SHUTTER MODE
AUTO
RETURN
It can restore the authenticity of the
color when it is aected by the
temperature change. The user can
choose dierent white balance
mode accordingly, “ATW1” , “ATW2”
“ATW3” .
4. AWB
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
When the IMAGE is displayed on the
screen, it allows you to do settings
of image function and details.
5. IMAGE ADJ
EXPOSURE
SHUTTER MODE
AGC
STD
AUTO
AT W 1AWB
IMAGE ADJ
PREV NEXT SAVE EXIT
SLOWSHUTTER
SHUTTER MODE
9×
RETURN
SHUTTER SPEED
SHUTTER MODE
1/100000
RETURN
BRIGHTNESS
STD
LOW
RETURN
INTENSITY
BLC
LOW
RETURN
AGC
RETURN
MODE OFF
MIDDLEINTENSITY
IMAGE ADJ
HDNR
3DNR
20/100
75/100
52/100
55/100
CONTRAST
SATURATION
RETURN
NEXT
SHARPNESS 80/100
“SHARPNESS”is used to adjust
overall image sharpness, can set
from 0-100, the higher value, the
sharper image.
1200TVL 16:9 Widescreen Camera
LEFT/RIGHT
Press the MENU to set camera
intensity. It has “LOW” , “MIDDLE” ,
“HIGH” three modes for choice.
22

Return to main page, press "NEXT" button to enter next page .
“DAYNIGHT” has four modes, "EXT” ,
“COLOR” , “BW” , “AUTO GEN" . It is
synchronous with infrared lamp’s
opening and closing time.
“EXT” mode can choose from 0/100
to 100/100. In “COLOR” mode, image
will always be color. In “BW” mode,
image will always be black and
white. “AUTO GEN”can control the
camera output color or black and
white image according to the
strength of the light, can set
daynight delay as picture below.
6. DAYNIGHT
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
D TIME
DAYNIGHT
0/100
RETURN
BAD PIXEL
RETURN
MODE ON
MIDDLEINTENSITY
HLC
RETURN
MODE OFF
0/100BLACKNESS
"SYSTEM”contains 5 parameters.
7. SYSTEM
“BAD PIXEL” is for bad pixel repair.
USER can choose "ON" or "OFF"
mode.
8. BAD PIXEL
User can adjust the size, position,
color, transparency of the chosen
area.
9. PRIVACY MASK
SYSTEM
TV GAMMA
TV BRIGHT
HIGH
MIDDLE
NTSC
NO
TV SYSTEM
RELOAD FTY
RETURN
LANG ENG
PRIVACY MASK
DEF COLOR
SELECT
1/15
1/14
OFFSWITCH
RANGE
RETURN
MODE MOSAIC
In “HLC” menu, press LEFT/RIGHT
key to select “ON”or “OFF”.
10. HLC
When the user nish setting and
want to save it, please choose
”SAVE” and press “EXIT” to exit the
OSD menu, the setting will be saved
in FLASH and will not loose when
the power supply is o or the
system is restarted.
11. SAVE
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
Press“EXIT” to exit the OSD menu.
11. EXIT
IMAGE ADJ
G GAIN
B HAIN
50/100
55/100
RETURN
NEXT
R GAIN 45/100
DAYNIGHT
DAY2NIGHT
NIGHT2DAY
80/100
70/100
RETURN
D CTPL 0/100
“HDNR” is used to adjust overall image noise, which can set from
0-100.
“3DNR” can adjust the level of noise reduction, the bigger value ,
the higher the noise reduction level, but cause the heavier ghost
eect.
“CONTARST” is the area ratio of the brightest screen and darkest
areas, it can set from 0-100.
“SATURATION” is used to adjust bright degree of color. It can set
from 0-100, the higher value,the deeper image color.
This page have three options,
“R GAIN” , “G GAIN” , “B GAIN” .
The user can adjust the value to
change color, also can set
dierent color value according to
camera environment.
“LANG” comes with “Chinese”
"Japanese" “English” three
languages for user of dierent
nationalities. User can select the
language by LEFT/RIGHT.
“TV SYSTEM” comes with“PAL” or
“NTSC” two modes for user of
dierent nationalities.
PRESS "NEXT" to enter next page.

Return to main page, press "NEXT" button to enter next page .
“DAYNIGHT” has four modes, "EXT” ,
“COLOR” , “BW” , “AUTO GEN" . It is
synchronous with infrared lamp’s
opening and closing time.
“EXT” mode can choose from 0/100
to 100/100. In “COLOR” mode, image
will always be color. In “BW” mode,
image will always be black and
white. “AUTO GEN”can control the
camera output color or black and
white image according to the
strength of the light, can set
daynight delay as picture below.
6. DAYNIGHT
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
D TIME
DAYNIGHT
0/100
RETURN
BAD PIXEL
RETURN
MODE ON
MIDDLEINTENSITY
HLC
RETURN
MODE OFF
0/100BLACKNESS
"SYSTEM”contains 5 parameters.
7. SYSTEM
“BAD PIXEL” is for bad pixel repair.
USER can choose "ON" or "OFF"
mode.
8. BAD PIXEL
User can adjust the size, position,
color, transparency of the chosen
area.
9. PRIVACY MASK
SYSTEM
TV GAMMA
TV BRIGHT
HIGH
MIDDLE
NTSC
NO
TV SYSTEM
RELOAD FTY
RETURN
LANG ENG
PRIVACY MASK
DEF COLOR
SELECT
1/15
1/14
OFFSWITCH
RANGE
RETURN
MODE MOSAIC
In “HLC” menu, press LEFT/RIGHT
key to select “ON”or “OFF”.
10. HLC
When the user nish setting and
want to save it, please choose
”SAVE” and press “EXIT” to exit the
OSD menu, the setting will be saved
in FLASH and will not loose when
the power supply is o or the
system is restarted.
11. SAVE
DAYNIGHT
SYSTEM
BAD PIXEL
EXT
PRIVACY MASK
HLC
PREV NEXT SAVE EXIT
Press“EXIT” to exit the OSD menu.
11. EXIT
IMAGE ADJ
G GAIN
B HAIN
50/100
55/100
RETURN
NEXT
R GAIN 45/100
DAYNIGHT
DAY2NIGHT
NIGHT2DAY
80/100
70/100
RETURN
D CTPL 0/100
“HDNR” is used to adjust overall image noise, which can set from
0-100.
“3DNR” can adjust the level of noise reduction, the bigger value ,
the higher the noise reduction level, but cause the heavier ghost
eect.
“CONTARST” is the area ratio of the brightest screen and darkest
areas, it can set from 0-100.
“SATURATION” is used to adjust bright degree of color. It can set
from 0-100, the higher value,the deeper image color.
This page have three options,
“R GAIN” , “G GAIN” , “B GAIN” .
The user can adjust the value to
change color, also can set
dierent color value according to
camera environment.
“LANG” comes with “Chinese”
"Japanese" “English” three
languages for user of dierent
nationalities. User can select the
language by LEFT/RIGHT.
“TV SYSTEM” comes with“PAL”or
“NTSC” two modes for user of
dierent nationalities.
PRESS "NEXT" to enter next page.