FPV Model Rescue-2 User manual
FPVMODEL®
Rescue-2
USER MANUAL
FP¥®
…n •
WARNING AND DISCLAIMER
Make sure not to adjust the gimbal or change it's mechanical structure by yourself. Be sure to
install the camera to gimbal before powering on and installing the gimbal onto the aircraft.
Please do not add other peripherals for the camera (Filter, Hood, etc.), so as to avoid the
gimbal performance degradation or internal line road damage.
When flying with Rescue-2 gimbal，please make sure your vehicle master flight control system
work in the safest state. We strongly recommend that removing the propellers on the aircraft
while setting up PTZ. Use non-power battery powered gimbal and keep children away from
the preset flight region.
Our company can not control the user's specific use, installation , assembly , modification
( including the use of non-specified parts ), and improper use. Direct or indirect damage or
injury that caused by the above, our company will not be liable for any loss and liability.
THINGS TO REMEMBER
Aerial photography with a 10x zoom gimbal camera is supposed to be fun and there's a lot to
learn. If you're having a difficult time, take a break and do some research. Don't be afraid to
ask for help in Facebook groups, RC related forums, or send us a message directly. If you're
new to the use of gimbal it can be trying and at times frustrating. Other flyers’ advice can be
your best source to ensuring your operation over the gimbal is as good as it can be.
For those of you whom are not new to flying with a professional gimbal...remember you were
once and any help you can give others is always appreciated. We see you guys out on the
forums and Facebook groups offering your knowledge to others that don't have as much.
Much respect! Thanks for the input.
BRIEF INTRODUCTION
Features:
All in One Design with Built-in 10x zoom HD camera.
Use BaseCam SimpleBGC 32-bit controller Encoder.
Compact structure yet easy to install.
One Key Lock, Shoot and Return to Center.
1035 Wide Range Lens.
Less Effect of Temperature Drift.
Support HDMI Transmission.
Able to Work uner Extremely Cold/Hot Environment (-30℃~+40℃).
Rescue-2 is the 2nd generation of Rescue 10x zoom gimbal. One key lock, shoot and return
to center. More stable, better camera lens, and less effect of temperature drift. Perfectly
integrated with the HD camera and Basecam SimpleBGC encoder, the Rescue-2 utilizes
world-leading stabilization technology to automatically stabilize your camera in flight.
It is specially designed for search and rescue missions. This is another tool that can be added
to your arsenal of equipment to aid you in those times when someone may be in imminent
danger or distress. The general field of search and rescue has many different sub-fields
typically determined by the type of terrain the search is conducted over, including mountain
rescue, ground search and rescue, urban search and rescue, combat search and rescue, and
air-sea search and rescue.
Rescue-2 is a very versatile tool that can be applied to the vast majority of search and rescue
missions due to its size, convenience, and quick deploy time. Using this 10x zoom gimbal will
give you a stable eye in the sky that can be controlled via drone pilot or a secondary
individual allowing for an overhead view that can cover a large amount of ground quickly
and effectively. The 10x zoom function will allow you to remain at a distance yet zoom closely
in on anything that requires your attention. The combined use of video transmitters and
receivers will give you a live view back at the mission base and allow for coordinating crews
in real time giving an effective means for obtaining the best possible outcome.
Use the aviation material, Basecam SimpleBGC encoder, 1035 wide range lens and many
more... The Rescue-2 is able to make the difficult balance between agility and image quality.
GENERAL SPECIFICATIONS
ITEM MIN. Standard
Input Voltage 10.2V 12.6V
Static Current 90mA 110mA
Dynamic Current 0.18A 0.45A
5V Output Voltage 4.5V 5V
5V Output Current 100mA 500mA
Static Attitude Tracking Accuracy ±0.01°
Motion Attitude Tracking Accuracy ±0.05°
Pitching Angle +45° ~ -90°
Rolling Angle +45° ~ -45°
Heading Angle +180° ~ -180°
Operation Temperature -30℃~ +40℃
Effective Pixel 2304(H) x 1536(V)
Dynamic Range 110dB
Optical Zoom 10X, f=4.9 to 49mm
Minimum Focus Distance 1.5m
Level Range of Observation 53.2°(Near Focus) - 5.65°(Far Focus)
Vertical Range of Observation 39.8°(Near Focus) - 4.2°(Far Focus)
Scanning Line by Line
Video Output 720P HDMI
Support Modes 1080P 30fps Storage
HDMI 720P 50/60fps
Frame Rate 60fps
Signal-to-Noise Ratio（S/N）48 dB
Back Light Compensation Back Light Compensation / Strong Light Suppression
Day / Night Conversion Color Mode Only
Auto Gain Auto
White Balance Auto
Electronic shutter Auto
External Control UART (2400, 4800, 9600, 38400,57600bps)
Commnucation Protocol Pelco-D, Hitachi, Visca, FC
Remote Control Infrared / Remote Zoom / Menu
Focus Auto / Manual / One-shot autofocus
Focus Speed 2 Seconds
Lens Initializing Built-in
User Presets 20
Image Flip Mirro/Flip
External Interface D-type HDMI, 6P terminal blocks
Weight 410g
F
TheR
notc
h
toth
e
PVMODELLIM
I
escue‐2gi
m
h
angetoo
t
e
cameraor
I
TEDE‐mail:
s
GIMB
A
m
balhasin
t
t
hercamer
a
gimbal,pl
e
s
ales@fpvmod
e
A
L ROT
A
t
egratedwi
a
byyours
e
e
asecontac
t
e
l.comTel:0
0
A
TION
tha10xzo
e
l
f
incase
o
t
FPVMod
e
0
86‐592‐65121
6
omoptical
o
fimcompa
e
l.
6
0
HDcamer
a
bility.Fora
a
,pleased
o
nydamag
e
o
e
INSTALLATION
Step 1: Insert the control cable to the right port of gimbal for functions of mode switching,
zooming, pitching and 5V output.
Step 2: Insert another control cable to VTX port on the left for functions of recording and
manual focus.
Step 3: Install the Rack Mounts and then mount to your multirotor or fixed wing.
USE GUIDE
1: Turn on the radio before powering on the gimbal.
2. Turn the right sticker to left or right, the camera will turn left or right accordingly.
3. Turn the left sticker to left or right, the camera will up or down accordingly.
4. Turn the level to switch the 3 modes of Following, Locking and One key return.
5. Turn the right sticker up or down for manually focus.
6. Turn the left sticker up or down for zooming in or out.
7. Turn the right level to switch the modes of shooting & recording.
FPV Model Rescue-2 Gimbal
Table of contents
