Franklin Fueling Systems CX6-AE-M User manual

HOSE ADAPTER
MODEL CX6-AE-M
INSTALLATION GUIDE

The informaon in this publicaon is provided for reference only. While every eort has been made to ensure the reliability and accuracy of
the informaon contained in this manual at the me of prinng, we recommend that you refer to “franklinfueling.com” for the most current
version of this manual. All product specicaons, as well as the informaon contained in this publicaon, are subject to change without noce.
Franklin Fueling Systems does not assume responsibility and expressly disclaims liability for loss, damage, or expense arising out of, or in any way
connected with, installaon, operaon, use, or maintenance by using this manual. Franklin Fueling Systems assumes no responsibility for any
infringement of patents or other rights of third pares that may result from use of this manual or the products. We make no warranty of any kind
with regard to this material, including, but not limited to, the implied warranes of merchantability and tness for a parcular purpose.
Copyright © 2020 Franklin Fueling Systems, LLC, Madison, WI 53718. All world rights reserved. No part of this publicaon may be stored in a
retrieval system, transmied, or reproduced in any way, including, but not limited to, photocopy, photograph, magnec, or other record, without
the prior wrien permission of Franklin Fueling Systems.
For technical assistance, please contact:
franklinfueling.com
3760 Marsh Rd. • Madison, WI 53718 • USA
Tel: USA & Canada [phone] • Fax: [phone]
Tel: UK [phone] • Tel: Mex 001 800 738 7610
HEALY is a trademark of Franklin Electric Company, Inc,
405214002 r1
Conventions used in this manual
This manual includes safety precauons and other important informaon presented in the following format:
NOTE: This provides helpful supplementary informaon.
IMPORTANT: This provides instrucons to avoid damaging hardware or a potenal hazard to the environment, for example: fuel leakage from
equipment that could harm the environment.
CAUTION: This indicates a potenally hazardous situaon that could result in minor or moderate injury if not avoided. This may also be used to
alert against unsafe pracces.
WARNING: This indicates a potenally hazardous situaon that could result in severe injury or death if not avoided.
DANGER: This indicates an imminently hazardous situaon that will result in death if not avoided.
Operating precautions
Franklin Fueling Systems (FFS) equipment is designed to be installed in areas where volale liquids such as gasoline and diesel fuel are present.
Working in such a hazardous environment presents a risk of severe injury or death if you do not follow standard industry pracces and the
instrucons in this manual. Before you work with or install the equipment covered in this manual, or any related equipment, read this enre
manual, parcularly the following precauons:
IMPORTANT: To help prevent spillage from an underground storage tank, make sure the delivery equipment is well-maintained, that there is a
proper connecon, and that the ll adaptor is ght. Delivery personnel should inspect delivery elbows and hoses for damage and missing parts.
CAUTION: Use only original FFS parts. Substung non-FFS parts could cause the device to fail, which could create a hazardous condion and/
or harm the environment.
WARNING: Follow all codes that govern how you install and service this product and the enre system. Always lock out and tag electrical
circuit breakers while installing or servicing this equipment and related equipment. A potenally lethal electrical shock hazard and the possibility
of an explosion or re from a spark can result if the electrical circuit breakers are accidentally turned on while you are installing or servicing this
product. Refer to this manual (and documentaon for related equipment) for complete installaon and safety informaon.
WARNING: Before you enter a containment sump, check for the presence of hydrocarbon vapors. Inhaling these vapors can make you dizzy or
unconscious, and if ignited, they can explode and cause serious injury or death. Containment sumps are designed to trap hazardous liquid spills
and prevent environmental contaminaon, so they can accumulate dangerous amounts of hydrocarbon vapors. Check the atmosphere in the
sump regularly while you are working in it. If vapors reach unsafe levels, exit the sump and venlate it with fresh air before you resume working.
Always have another person standing by for assistance.
WARNING: Follow all federal, state, and local laws governing the installaon of this product and its associated systems. When no other
regulaons apply, follow NFPA codes 30, 30A, and 70 from the Naonal Fire Protecon Associaon. Failure to follow these codes could result in
severe injury, death, serious property damage, and/or environmental contaminaon.
WARNING: Always secure the work area from moving vehicles. The equipment in this manual is usually mounted underground, so reduced
visibility puts service personnel working on it in danger from moving vehicles that enter the work area. To help prevent this safety hazard, secure
the area by using a service truck (or some other vehicle) to block access to the work area.
DANGER: Make sure you check the installaon locaon for potenal ignion sources such as ames, sparks, radio waves, ionizing radiaon,
and ultrasound sonic waves. If you idenfy any potenal ignion sources, you must make sure safety measure are implemented.

The Healy™ CX6-AE-M is a cast aluminum hose adapter used to connect a non vapor-ready
gasoline dispenser to a coaxial metric stage II vapor recovery hose. It has tapered BSPT threads
on the inlet and metric straight threads on the outlet side.
IMPORTANT: Do not use this adapter if the dispenser is already vapor-ready.
1/4" BSPT Vapor Return Port
1" BSPT M34 Straight
Hose Thread
Tools and equipment:
• Pipe sealant (non-hardening)
• Motor oil (for lubricang O-rings)
• 15" (38 cm) adjustable wrench
• 1.5" (38 mm) open-end wrench for hose end
Installaon:
1. Read this guide.
2. Disconnect power to the dispenser, and close emergency shut-o valves.
3. Remove the exisng hanging hardware.
4. Apply non-hardening pipe sealant to the exposed male BSPT threads on the product
dispenser.
5. Aach the tapered end of the CX6-AE-M hose adapter to the product dispenser threads.
Tighten this to 80 foot-pounds of torque. Make sure the vapor return port (¼” port on the
side of the adapter) is correctly posioned before nal ghtening.
6. Aach the appropriate fitting to the port of the CX6-AE-M adapter and torque to 40 foot-
pounds.
7. Connect the vapor return line to the ng in the vapor return port.
8. Install the Healy™ Stage II vapor recovery hanging hardware to the adapter. Lubricate the
O-rings with oil. Tighten to 35 to 70 -lbs.
9. If the dispenser is equipped with a breakaway, be sure to aach the hose clamp onto the
dispenser side of the breakaway.
Tesng:
1. Restore dispenser power and open the emergency shut-o valves.
2. Acvate the dispenser and dispense product unl the full-ow solenoid is acvated.
3. Release the nozzle lever and inspect for leaks around the adapter and hose ngs. Repair if
required.
4. Check to make sure there is no advance of the GALLONS/LITERS meter when the nozzle is
closed but with the dispenser authorized. If the GALLONS/LITERS meter slowly advances or
creeps, there is a leak from the product to vapor side of the hose.
5. Deacvate dispenser by returning nozzle to its holder.
6. If leaks are found, check hose ng to make sure O-rings are seated and not cut or rolled
over. Repair as necessary.

405214002 r1
A Franklin Fueling Systems Brand