Fraser-Johnston RELIANT Series Quick start guide

5496242-FTG-F-0620
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
RELIANTTM SERIES
2-STAGE
SPLIT SYSTEM
HEAT PUMPS
19 SEER – R-410A – 1 PHASE
2 THRU 5 NOMINAL TONS
MODELS: HL19B24 THRU 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.simplygettingthejobdone.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Extended 10-Years limited parts warranty.
Extended Lifetime limited compressor warranty.
Extended parts and compressor warranties require online
registration within 90 days of purchase for replacement or
closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or Internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR INSTALLATION IN ALL US REGIONS AND CANADA
Installation Allowed

DESCRIPTION
The Reliant™ Series HL19, 2-stage Heat Pumps are the out-
door section of a high efficiency communicating cooling system.
They are designed as part of a matched system using a stan-
dard ECM or variable speed ECM air handler or communicating
furnace with a CF/CM coil. Both the matched CF/CM coil and
air handler utilize dealer-installed TXVs. The CF/CM coils can
also be matched with the standard ECM or variable speed ECM
modular air handlers.
FEATURES
•Superior Coil Protection – An easily removable two-piece
steel extruded louver coil guard protects the tube-in-fin coil
from debris and physical damage while making access for
coil cleaning quick and simple.
•Environmentally Friendly Refrigerant – The next genera-
tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.
•Durable Finish – A high quality powder paint finish rated at
1000 hrs. salt spray provides the ultimate protection from cor-
rosion and harmful UV rays, ensuring a long-lasting, high
quality appearance.
•Sound Reducing System – Features a combination of engi-
neered, sound-neutralizing attributes such as a swept-wing
fan blade, composite base pan, multi-density compressor
cloak and 2-stage compressor operation to reduce sound lev-
els to that of a mere conversation.
•ECM Fan Motor – Dynamically adjusts speed in sync with
the compressor stage to keep heat exchange in balance
while minimizing power consumption and sound.
•Swept Wing Fan – A design adapted from aerospace engi-
neering provides whisper-quiet operation by allowing air to
flow smoothly and efficiently across the fan surface and
edges.
•Composite Base Pan – The strong and durable composite
base pan is corrosion resistant while adding strength, absorb-
ing sound, and reducing vibration.
•High-Efficiency Outdoor Coil – An aluminum fin and copper
tube outdoor coil provide easy cleaning, low restriction to air-
flow and efficient heat exchange.
•Factory Installed Filter-Drier – A corrosion resistant stain-
less steel, solid core liquid line filter-drier removes debris and
moisture which can be harmful to the system.
•Climate Site™ – provides pre-configured operating profiles
the installing contractor can select during set-up to fine tune
the system's operation for either Humid, Dry, or Normal cli-
mates. Additional fine-tune adjustments are always available
to provide a custom comfort solution. (Feature available
when a variable speed indoor air mover is utilized.)
•Easy Service Access – A large electrical box cover and a
swing open electrical box provide superior full corner access
to the inside of the unit for maintenance or service.
•TXV Controls – All indoor coils, whether in the cased CF/CM
coil or in air handlers, utilize TXVs (Thermostatic Expansion
Valves).
•Communications Capable – Designed to operate as a con-
ventionally wired system or as a communicating system
requiring only 4 thermostat wires between the outdoor and
indoor units, the communicating system provides self-com-
missioning on start-up as well as the ability to check system
status at the outdoor unit, thermostat, or remotely using the
designated App.

5496242-FTG-F-0620
2 Johnson Controls Unitary Products
•Advanced System Control – The proprietary Wi-Fi Hx™
thermostat interface is an integral part of this innovative sys-
tem design. Using the Consumer App, consumers can moni-
tor and adjust their system from anywhere in the world using
a smart device. Contractors can use the Service App (with
homeowner permission), to monitor the system remotely and
make adjustments as needed. The system can be configured
to provide alerts for emerging issues as well as items that
require immediate attention.
•Suction Accumulator – Protects the compressor from liquid
flood back.
•Two Stage, Protected Scroll Compressor – The compres-
sor is solenoid operated for 67% and 100% capacity. A suc-
tion accumulator tank protects the compressor from harm.
•Compressor Crank Case Heater – Factory installed com-
pressor crank case heater that warms the compressor sump.
Crank case heater is cycled on and off as necessary by the
unit defrost control board.
•Compressor Sound Blanket – Factory installed compressor
sound blanket.
•Agency Listed – Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.
LIST OF SECTIONS
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
LIST OF SECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
PHYSICAL AND ELECTRICAL DATA . . . . . . . . . . . . . . . . . . . . . . .3
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS . . . . . . .4
SYSTEM CAPACITY - Single Piece and Modular Air Handlers . . .5
SYSTEM CAPACITY - With High Efficiency Motor Furnaces . . . .9
APPLICATIONS AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . .35
SOUND POWER RATINGS - COOLING . . . . . . . . . . . . . . . . . . . . .35
SOUND POWER RATINGS - HEATING . . . . . . . . . . . . . . . . . . . . .35
MECHANICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . .36
TYPICAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
TYPICAL FIELD WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
ALTERNATIVE INSTALLATION CLEARANCES . . . . . . . . . . . . . .38
PERFORMANCE DATA - 2 TON . . . . . . . . . . . . . . . . . . . . . . . . . . .39
PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . . .43
PERFORMANCE DATA - 4 TON . . . . . . . . . . . . . . . . . . . . . . . . . . .52
PERFORMANCE DATA - 5 TON . . . . . . . . . . . . . . . . . . . . . . . . . . .54
NOMENCLATURE
PRODUCT TYPE HA= Premium Heat Pump
BRAND LL= Champion
NOMINALSERIES
EFFICIENCY AND STAGING 19 19 = 19 SEER / 2-Stage
REFRIGERANT BB= R-410A
NOMINAL UNIT
CAPACITY (MBH) 36
24 = 2 Ton
36 = 3 Ton
48 = 4 Ton
60 = 5 Ton
VOLTAGE
(Voltage-Phase-Hertz) 22= 208/230-1-60
GENERATION
(MAJOR REVISION) 11= 1st Gen
2= 2nd Gen
etc
FACTORY OPTION SS= Standard (No Options)
STYLE LETTER
(MINOR REVISION)
NOT USED FOR ORDERING AA= Style A
B= Style B
etc

5496242-FTG-F-0620
Johnson Controls Unitary Products 3
‡ Adapter fitting must be field installed for the required 1-1/8” line set.
‡ Adapter fitting must be field installed for the required 1-1/8” line set.
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
PHYSICAL AND ELECTRICAL DATA
MODEL HL19B2421S HL19B3621S HL19B4821S HL19B6021S
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1
1. Rated in accordance withAHRI Standard 110-2012, utilization range “A”.
187 to 252
Minimum Circuit Ampacity 15.30 21.4 28.2 31.4
Max. Overcurrent Device Amps 2
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
25 35 45 50
Min. Overcurrent Device Amps 3
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
20 25 30 35
Compressor Type 2-Stage Scroll 2-Stage Scroll 2-Stage Scroll 2-Stage Scroll Rated Load 10.0 14.9 20.4 22.9
Locked Rotor 62.9 84.2 122.1 147.2
Crankcase Heater Yes Yes Yes Yes
Factory External Discharge Muffler Yes Yes Yes Yes
HS Kit Required with TXV No No No No
HS Kit Part Number (S1-2SA067*****)4
4. Use S1-2SA067***** series kit. See Hard Start Kit Accessory Installation Manual.
10106 10106 10106 10106
Fan Diameter Inches 24 26 26 26
Fan Motor (ECM)
Rated HP 1/3 1/3 1/3 1/3
Rated Load Amps 2.80 2.80 2.80 2.80
Nominal RPM 640 830 830 830
Nominal CFM 2500 4000 4100 4100
Coil Face Area Sq. Ft. 23.05 26.4 31.2 31.2 Rows Deep 1 2 2 2
Fins / Inch 22 18 18 18
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed)5
5. For applications with non-standard vapor line sizes, see the “Applications &Accessories” section of this Technical Guide.
3/4 3/4 7/8 1-1/8‡
Unit Charge (Lbs. - Oz.) 6
6. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or sub-
tract the amount of refrigerant, using the difference in actual lineset length (not the equivalent length) multiplied by the per foot value.
6 - 1 12 - 7 17 - 7 18 - 10
Charge Per Foot, Oz. 0.62 0.62 0.67 0.75
Operating Weight Lbs. 215 285 315 315
Note: These models are shipped with a Hard Start Kit installed at the factory.
%
$
$
&
DIMENSIONS
Unit
Model
Dimensions
(Inches) Refrigerant Connection Service Valve Size
A B C Liquid Vapor
HL19B2421S 40-1/4 35-1/2 32
3/8 3/4
HL19B3621S 40-1/4 38-1/4 34-1/2
HL19B4821S 46-1/2 38-1/4 34-1/2 7/8
HL19B6021S 46-1/2 38-1/4 34-1/2 7/8‡

5496242-FTG-F-0620
4 Johnson Controls Unitary Products
CHARGING PROCEDURES (COOLING OR HEATING):
1. Check the Factory Unit Charge listed on the unit nameplate to verify the refrigerant charge for the outdoor unit, the smallest matched indoor unit, and the 15 feet
of interconnecting lineset.
2. Verify the TXV and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and actual lineset length.
5. Once the charge adders for matched indoor unit and for lineset have been weighed in, verify the system operation against the temperatures and pressures in the
Charging Chart for the outdoor unit. Locate Charging Charts on the outdoor unit and also in the Service Data Application Guide on
www.simplygettingthejobdone.com. Follow the Subcool or Superheat charging procedure in the Installation Manual according to the type of indoor metering
device in the system, and allow ten minutes after each charge adjustment for the system operation to stabilize. Record the charge adjustment made to match the
Charging Chart.
6. Permanently mark the unit nameplate with the TOTAL SYSTEM CHARGE defined as follows: TOTAL SYSTEM CHARGE = Base Charge (as shipped) + charge
adder for matched indoor unit + charge adder for actual lineset length +/- charge adjustments to match the Charging Chart.
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS
Outdoor Unit HL19B2421S HL19B3621S HL19B4821S HL19B6021S
Required TXV 1,2 BB1 BB1 BC1 BC1
Indoor Unit 3,4,5 Additional Charge, oz
AE24B 0 – – –
AE30B 28 – – –
AE36(B,C) 28 0 – –
AE42C – 26 – –
AE48(C,D) – 14 – –
AE60D – – 0 0
AVC24B 0 – – –
AVC30B 28 – – –
AVC36(B,C) 28 0 – –
AVC42C – 14 – –
AVC48(C,D) – 14 – –
AVC60C – 22 – –
AVC60D – – 0 0
CF/CM/CU24(A,B) 0 – – –
CF/CM/CU30(A,B,C) 28 – – –
CF/CM/CU36(A,B,C) 31 0 – –
CF/CM/CU42(B,C,D) – 26 – –
CF/CM/CU48(C,D) – 14 – –
CF/CM/CU60(C,D) – 22 – –
CF/CM64D – – 0 0
All of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. “Coil Only” matches
are not available for these systems.
FOOTNOTES:
1. For applications requiring a TXV, use S1-1TVM*** series kit.
2. ATXV kit must be used with these indoor units to obtain system performance.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. CF coils cannot be used in horizontal applications.
5. Charge adders shown above do not indicate that coils are rated for every application. Refer to Performance Data Tables for actual performance for specified sys-
tem matches. Obtain certified system ratings from www.ahridirectory.org.

5496242-FTG-F-0620
Johnson Controls Unitary Products 5
SYSTEM CAPACITY - Single Piece and Modular Air Handlers
UNIT
MODEL
AIR HANDLER COIL
MODEL1Stage RATED CFM
COOLING 2HEATING 3
MODEL WIDTH NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD
HL19B2421S AE24BX21 17.5 – 1 675 19.8 15.9 17.00 26.50 16.10 – – – 4.24 –
HL19B2421S AE24BX21 17.5 – 2 850 22.4 19.0 – 13.50 23.20 14.40 9.00 7.90 3.96 2.58
HL19B2421S AE30BX21 17.5 – 1 625 19.6 15.3 17.00 26.35 15.70 – – – 3.94 –
HL19B2421S AE30BX21 17.5 – 2 750 22.6 17.8 – 14.00 23.20 14.30 9.00 7.75 3.88 2.54
HL19B2421S AE36CX21 21.0 – 1 725 20.8 17.0 19.00 28.85 16.00 – – – 4.38 –
HL19B2421S AE36CX21 21.0 – 2 875 24.0 20.2 – 15.00 22.60 14.10 10.00 8.25 4.16 2.76
HL19B2421S AVC24BX21 17.5 – 1 550 19.1 14.1 17.00 26.55 16.10 – – – 4.06 –
HL19B2421S AVC24BX21 17.5 – 2 850 22.2 18.8 – 13.50 23.20 14.40 9.00 7.85 3.94 2.58
HL19B2421S AVC30BX21 17.5 – 1 625 19.6 15.3 17.00 26.40 15.70 – – – 3.94 –
HL19B2421S AVC30BX21 17.5 – 2 850 22.8 19.2 – 14.00 23.20 14.40 9.00 7.75 3.94 2.54
HL19B2421S AVC36BX21 17.5 – 1 650 20.4 15.9 18.00 30.30 16.00 – – – 4.26 –
HL19B2421S AVC36BX21 17.5 – 2 925 23.8 20.6 – 14.00 22.80 14.30 9.50 8.10 4.08 2.68
HL19B2421S AVC36CX21 21.0 – 1 625 21.2 17.6 19.00 29.15 15.60 – – – 4.24 –
HL19B2421S AVC36CX21 21.0 – 2 900 24.0 19.9 – 15.00 22.20 13.70 10.00 8.35 4.02 2.68
HL19B2421S ME08BN21 17.5 CF/CM24B 1 625 19.5 15.2 17.00 26.45 16.20 – – – 4.14 –
HL19B2421S ME08BN21 17.5 CF/CM24B 2 800 22.0 18.2 – 13.50 23.20 14.50 9.00 7.80 3.88 2.52
HL19B2421S ME08BN21 17.5 CF/CM30B 1 625 19.6 15.3 17.00 26.40 15.70 – – – 3.94 –
HL19B2421S ME08BN21 17.5 CF/CM30B 2 800 22.8 18.6 – 14.00 23.20 14.40 9.00 7.75 3.90 2.54
HL19B2421S ME08BN21 17.5 CF/CM36B 1 625 20.2 15.5 18.00 30.10 16.00 – – – 4.20 –
HL19B2421S ME08BN21 17.5 CF/CM36B 2 800 23.6 18.9 – 14.00 22.80 14.30 9.60 8.10 4.02 2.66
HL19B2421S ME12BN21 17.5 CF/CM24B 1 700 19.9 16.3 18.00 26.70 16.10 – – – 4.30 –
HL19B2421S ME12BN21 17.5 CF/CM24B 2 875 22.4 19.3 – 14.00 23.20 14.40 9.50 7.95 3.98 2.60
HL19B2421S ME12BN21 17.5 CF/CM30B 1 700 20.0 16.4 17.00 27.35 15.70 – – – 4.04 –
HL19B2421S ME12BN21 17.5 CF/CM30B 2 875 23.0 19.6 – 14.00 23.20 14.30 9.00 7.85 3.98 2.58
HL19B2421S ME12BN21 17.5 CF/CM36B 1 700 20.8 16.7 18.00 28.15 16.00 – – – 4.32 –
HL19B2421S ME12BN21 17.5 CF/CM36B 2 875 23.8 19.9 – 14.00 22.80 14.20 9.60 8.15 4.10 2.70
HL19B2421S ME12CN21 21.0 CF/CM24C 1 650 20.2 15.7 18.00 27.30 16.50 – – – 3.44 –
HL19B2421S ME12CN21 21.0 CF/CM24C 2 850 22.4 19.0 – 14.00 24.00 13.80 8.50 7.50 3.44 2.64
HL19B2421S ME12CN21 21.0 CF/CM30C 1 650 20.0 15.7 17.00 27.45 15.70 – – – 3.94 –
HL19B2421S ME12CN21 21.0 CF/CM30C 2 850 23.0 19.4 – 14.00 23.40 14.40 9.00 7.75 3.92 2.52
HL19B2421S ME12CN21 21.0 CF/CM36C 1 750 20.8 17.3 19.00 28.60 15.50 – – – 4.22 –
HL19B2421S ME12CN21 21.0 CF/CM36C 2 850 23.8 19.7 – 15.00 22.20 13.70 10.00 8.30 4.00 2.66
HL19B2421S MVC08BN21 17.5 CF/CM24B 1 525 19.0 13.7 17.00 26.40 16.10 – – – 3.96 –
HL19B2421S MVC08BN21 17.5 CF/CM24B 2 800 22.0 18.2 – 13.50 23.20 14.40 9.00 7.80 3.88 2.54
HL19B2421S MVC08BN21 17.5 CF/CM30B 1 525 19.2 13.8 17.00 26.55 15.70 – – – 3.76 –
HL19B2421S MVC08BN21 17.5 CF/CM30B 2 800 22.8 18.6 – 14.00 23.20 14.40 9.00 7.70 3.90 2.54
HL19B2421S MVC08BN21 17.5 CF/CM36B 1 525 19.9 14.1 18.00 27.95 15.90 – – – 4.04 –

5496242-FTG-F-0620
6 Johnson Controls Unitary Products
HL19B2421S MVC08BN21 17.5 CF/CM36B 2 800 23.6 18.9 – 14.00 22.60 14.20 9.60 8.05 4.04 2.66
HL19B2421S MVC12BN21 17.5 CF/CM24B 1 625 19.7 15.3 17.00 27.00 16.10 – – – 4.20 –
HL19B2421S MVC12BN21 17.5 CF/CM24B 2 875 22.4 19.3 – 13.50 23.20 14.40 9.00 7.95 3.98 2.58
HL19B2421S MVC12BN21 17.5 CF/CM30B 1 625 19.6 15.3 17.00 26.70 15.70 – – – 3.94 –
HL19B2421S MVC12BN21 17.5 CF/CM30B 2 875 23.0 19.6 – 14.00 23.20 14.30 9.00 7.80 3.96 2.58
HL19B2421S MVC12BN21 17.5 CF/CM36B 1 625 20.4 15.6 18.00 30.55 16.00 – – – 4.22 –
HL19B2421S MVC12BN21 17.5 CF/CM36B 2 875 23.8 19.9 – 14.00 22.80 14.20 9.60 8.15 4.10 2.70
HL19B2421S MVC12CN21 21.0 CF/CM24C 1 675 19.8 15.9 18.00 27.30 16.10 – – – 4.32 –
HL19B2421S MVC12CN21 21.0 CF/CM24C 2 875 22.4 19.3 – 14.00 23.00 14.30 9.60 8.00 4.02 2.62
HL19B2421S MVC12CN21 21.0 CF/CM30C 1 675 20.0 16.0 17.00 28.00 15.70 – – – 4.06 –
HL19B2421S MVC12CN21 21.0 CF/CM30C 2 875 23.0 19.6 – 13.50 23.20 14.20 9.00 7.90 4.02 2.60
HL19B3621S AE36BX21 17.5 – 1 1025 29.0 23.8 17.00 24.30 28.80 – – – 4.54 –
HL19B3621S AE36BX21 17.5 – 2 1125 35.2 27.4 – 13.00 35.20 21.80 9.50 8.35 3.78 2.68
HL19B3621S AE36CX21 21.0 – 1 1050 29.0 24.4 17.00 25.15 28.60 – – – 4.86 –
HL19B3621S AE36CX21 21.0 – 2 1200 35.6 28.4 – 13.00 35.00 21.80 9.50 8.45 4.00 2.68
HL19B3621S AE42CX21 21.0 – 1 1000 30.2 24.2 18.00 26.50 24.20 – – – 3.96 –
HL19B3621S AE42CX21 21.0 – 2 1175 35.2 28.0 – 14.00 35.40 21.80 9.60 8.25 4.02 2.68
HL19B3621S AE48CX21 21.0 – 1 1100 30.6 25.6 18.00 26.70 24.20 – – – 3.90 –
HL19B3621S AE48CX21 21.0 – 2 1250 36.0 29.0 – 14.00 35.40 21.80 9.60 8.25 3.98 2.68
HL19B3621S AE48DX21 24.5 – 1 1100 30.4 25.6 18.25 27.05 24.00 – – – 4.10 –
HL19B3621S AE48DX21 24.5 – 2 1300 36.0 29.8 – 14.00 35.00 21.80 10.00 8.30 4.24 2.68
HL19B3621S AVC36BX21 17.5 – 1 700 27.8 19.5 17.00 25.00 28.60 – – – 4.00 –
HL19B3621S AVC36BX21 17.5 – 2 1025 33.8 25.6 – 13.00 35.20 21.80 9.50 8.25 3.70 2.68
HL19B3621S AVC36CX21 21.0 – 1 825 28.6 21.4 17.00 25.85 28.80 – – – 4.40 –
HL19B3621S AVC36CX21 21.0 – 2 1175 34.6 27.6 – 13.00 35.20 21.80 9.50 8.35 3.82 2.68
HL19B3621S AVC42CX21 21.0 – 1 725 28.8 20.4 18.00 26.45 24.40 – – – 3.40 –
HL19B3621S AVC42CX21 21.0 – 2 1100 34.8 27.0 – 14.00 35.60 21.80 9.50 8.10 3.90 2.68
HL19B3621S AVC48CX21 21.0 – 1 725 28.8 20.2 18.00 26.55 24.40 – – – 3.40 –
HL19B3621S AVC48CX21 21.0 – 2 1125 34.8 27.2 – 14.00 35.40 21.80 9.50 8.10 3.92 2.68
HL19B3621S AVC48DX21 24.5 – 1 775 29.2 21.2 18.00 26.95 24.20 – – – 3.52 –
HL19B3621S AVC48DX21 24.5 – 2 1150 36.0 28.0 – 14.00 35.40 21.80 9.60 8.15 3.98 2.68
HL19B3621S AVC60CX21 21.0 – 1 800 30.0 21.6 19.00 26.90 24.40 – – – 3.46 –
HL19B3621S AVC60CX21 21.0 – 2 1200 35.8 28.4 – 14.00 35.20 22.40 10.00 8.50 4.20 2.82
HL19B3621S ME12BN21 17.5 CF42B 1 875 29.8 22.4 17.00 25.30 28.60 – – – 3.42 –
HL19B3621S ME12BN21 17.5 CF42B 2 1050 34.0 26.0 – 13.00 35.60 21.80 9.00 8.10 3.54 2.68
HL19B3621S ME12CN21 21.0 CF/CM36C 1 875 28.4 22.0 17.00 25.20 28.80 – – – 4.58 –
HL19B3621S ME12CN21 21.0 CF/CM36C 2 1000 34.8 25.6 – 13.00 35.00 21.80 9.50 8.40 3.88 2.68
SYSTEM CAPACITY - Single Piece and Modular Air Handlers (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1Stage RATED CFM
COOLING 2HEATING 3
MODEL WIDTH NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
Johnson Controls Unitary Products 7
HL19B3621S ME14DN21 24.5 CF/CM42D 1 900 29.8 22.8 18.00 25.90 28.20 – – – 3.94 –
HL19B3621S ME14DN21 24.5 CF/CM42D 2 1025 34.0 25.8 – 13.00 35.40 21.80 9.60 8.25 3.68 2.68
HL19B3621S ME14DN21 24.5 CF/CM48D 1 900 31.0 23.4 18.00 28.15 22.40 – – – 4.66 –
HL19B3621S ME14DN21 24.5 CF/CM48D 2 1025 35.4 26.4 – 14.00 31.80 18.90 10.00 9.35 4.84 3.18
HL19B3621S ME14DN21 24.5 CF/CM60D 1 900 30.0 23.0 19.00 27.05 24.00 – – – 4.06 –
HL19B3621S ME14DN21 24.5 CF/CM60D 2 1025 34.8 26.2 – 14.00 35.00 22.40 10.00 8.70 4.22 2.82
HL19B3621S ME16CN21 21.0 CF/CM36C 1 950 29.0 23.0 17.00 25.20 28.80 – – – 4.44 –
HL19B3621S ME16CN21 21.0 CF/CM36C 2 1100 34.4 26.8 – 13.00 35.20 21.80 9.60 8.35 3.80 2.68
HL19B3621S ME16CN21 21.0 CF/CM42C 1 950 30.0 23.4 18.00 25.55 28.60 – – – 3.62 –
HL19B3621S ME16CN21 21.0 CF/CM42C 2 1100 34.4 26.8 – 13.00 35.80 21.80 9.00 8.15 3.46 2.68
HL19B3621S ME16CN21 21.0 CF/CM48C 1 950 30.0 23.6 18.00 26.35 24.20 – – – 3.82 –
HL19B3621S ME16CN21 21.0 CF/CM48C 2 1100 34.8 27.0 – 14.00 35.60 21.80 9.60 8.20 3.92 2.68
HL19B3621S ME16CN21 21.0 CF/CM60C 1 950 30.0 23.6 18.00 26.45 23.80 – – – 4.10 –
HL19B3621S ME16CN21 21.0 CF/CM60C 2 1100 35.8 27.4 – 14.00 34.80 22.40 10.00 8.75 4.26 2.82
HL19B3621S MVC12BN21 17.5 CF/CM36B 1 700 27.8 19.5 17.00 25.20 28.60 – – – 4.02 –
HL19B3621S MVC12BN21 17.5 CF/CM36B 2 1025 33.8 25.6 – 13.00 35.20 21.80 9.50 8.25 3.72 2.68
HL19B3621S MVC12BN21 17.5 CF42B 1 675 27.6 19.1 18.00 25.15 28.40 – – – 3.54 –
HL19B3621S MVC12BN21 17.5 CF42B 2 975 33.6 25.0 – 13.00 35.00 21.80 9.50 8.15 3.74 2.68
HL19B3621S MVC12CN21 21.0 CF/CM36C 1 850 28.4 21.6 18.00 25.50 28.60 – – – 4.58 –
HL19B3621S MVC12CN21 21.0 CF/CM36C 2 1000 34.8 25.8 – 14.00 35.00 21.80 9.60 8.40 3.90 2.68
HL19B3621S MVC12CN21 21.0 CF/CM42C 1 850 28.4 21.6 18.00 24.90 28.00 – – – 4.00 –
HL19B3621S MVC12CN21 21.0 CF/CM42C 2 1000 34.0 25.4 – 13.00 35.00 21.80 9.50 8.30 3.76 2.68
HL19B3621S MVC12CN21 21.0 CF/CM48C 1 775 29.2 21.0 18.00 27.65 24.20 – – – 3.58 –
HL19B3621S MVC12CN21 21.0 CF/CM48C 2 1175 35.2 28.0 – 14.00 35.40 21.80 9.60 8.15 4.08 2.66
HL19B3621S MVC12CN21 21.0 CF/CM60C 1 775 30.0 21.4 19.00 27.75 24.60 – – – 3.16 –
HL19B3621S MVC12CN21 21.0 CF/CM60C 2 1175 36.0 28.4 – 14.00 36.00 22.40 9.50 8.35 3.68 2.82
HL19B3621S MVC14DN21 24.5 CF/CM42D 1 700 28.8 20.0 18.00 26.45 28.60 – – – 3.26 –
HL19B3621S MVC14DN21 24.5 CF/CM42D 2 1050 34.2 26.2 – 13.00 35.40 21.80 9.00 8.05 3.60 2.68
HL19B3621S MVC14DN21 24.5 CF/CM48D 1 650 28.2 19.1 18.00 26.50 24.40 – – – 3.26 –
HL19B3621S MVC14DN21 24.5 CF/CM48D 2 1000 35.6 26.2 – 14.00 35.20 21.80 9.50 8.10 3.96 2.68
HL19B3621S MVC14DN21 24.5 CF/CM60D 1 800 29.6 21.6 19.00 27.85 23.80 – – – 3.98 –
HL19B3621S MVC14DN21 24.5 CF/CM60D 2 1250 36.0 29.4 – 14.00 34.60 22.40 10.00 8.70 4.44 2.82
HL19B3621S MVC16CN21 21.0 CF/CM36C 1 800 28.6 21.2 18.00 25.50 24.40 – – – 3.62 –
HL19B3621S MVC16CN21 21.0 CF/CM36C 2 1200 34.6 28.0 – 14.00 35.20 21.80 9.60 8.20 3.78 2.68
HL19B3621S MVC16CN21 21.0 CF/CM42C 1 800 28.8 21.0 18.00 25.95 28.80 – – – 3.24 –
HL19B3621S MVC16CN21 21.0 CF/CM42C 2 1200 34.8 28.2 – 13.00 35.20 21.80 9.00 8.05 3.90 2.68
HL19B3621S MVC16CN21 21.0 CF/CM60C 1 825 30.0 22.0 19.00 27.45 24.00 – – – 3.80 –
HL19B3621S MVC16CN21 21.0 CF/CM60C 2 1275 36.0 29.4 – 14.00 35.20 22.40 10.00 8.65 4.20 2.82
SYSTEM CAPACITY - Single Piece and Modular Air Handlers (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1Stage RATED CFM
COOLING 2HEATING 3
MODEL WIDTH NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
8 Johnson Controls Unitary Products
— = Not applicable.
HL19B3621S MVC20DN21 24.5 CF/CM42D 1 825 29.6 21.8 18.00 27.00 28.80 – – – 3.30 –
HL19B3621S MVC20DN21 24.5 CF/CM42D 2 1175 35.4 28.2 – 13.00 35.60 21.80 9.00 8.05 3.44 2.68
HL19B3621S MVC20DN21 24.5 CF/CM48D 1 825 29.6 21.8 18.00 27.40 24.20 – – – 3.80 –
HL19B3621S MVC20DN21 24.5 CF/CM48D 2 1175 35.4 28.2 – 14.00 35.20 21.80 9.60 8.25 4.10 2.68
HL19B3621S MVC20DN21 24.5 CF/CM60D 1 825 30.0 22.0 19.00 27.80 24.40 – – – 3.24 –
HL19B3621S MVC20DN21 24.5 CF/CM60D 2 1175 36.0 28.4 – 14.00 36.00 22.40 9.60 8.35 3.72 2.82
HL19B4821S AE60DX21 24.5 – 1 1200 38.0 29.4 17.00 24.15 30.60 – – – 3.72 –
HL19B4821S AE60DX21 24.5 – 2 1375 46.5 34.8 – 13.00 46.50 30.40 9.60 8.65 4.06 2.98
HL19B4821S AVC60DX21 24.5 – 1 1075 37.6 28.0 17.00 24.55 30.40 – – – 3.66 –
HL19B4821S AVC60DX21 24.5 – 2 1400 46.5 35.2 – 13.00 46.50 30.60 9.60 8.55 4.02 2.94
HL19B4821S ME20DN21 24.5 CF/CM64D 1 1300 38.5 30.8 17.00 24.10 30.60 – – – 3.78 –
HL19B4821S ME20DN21 24.5 CF/CM64D 2 1475 47.0 36.2 – 13.00 46.50 30.40 9.60 8.70 4.10 3.00
HL19B6021S AE60DX21 24.5 – 1 1375 42.5 31.8 16.50 20.70 37.40 – – – 3.68 –
HL19B6021S AE60DX21 24.5 – 2 1550 56.5 41.0 – 13.00 57.50 36.40 9.60 8.15 3.86 2.62
HL19B6021S AVC60DX21 24.5 – 1 1050 41.0 27.8 16.50 21.00 37.00 – – – 3.50 –
HL19B6021S AVC60DX21 24.5 – 2 1600 56.5 41.0 – 12.50 57.50 37.00 9.60 8.35 3.82 2.72
HL19B6021S ME20DN21 24.5 CF/CM64D 1 1325 42.5 31.2 16.50 21.30 37.20 – – – 3.70 –
HL19B6021S ME20DN21 24.5 CF/CM64D 2 1675 57.0 42.5 – 13.00 57.50 36.60 9.60 8.50 3.92 2.76
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
1. CM coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period.
3. Heating MBH based onAHRI standards of 70°F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period.
COP (Coefficient of Performance) equals Heating MBH output divided by (total KW input x 3.412).
SYSTEM CAPACITY - Single Piece and Modular Air Handlers (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1Stage RATED CFM
COOLING 2HEATING 3
MODEL WIDTH NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
Johnson Controls Unitary Products 9
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD
HL19B2421S TM8V060A12MP12C 14.5 CF/CM/CU24A 1 575 19.4 14.5 17.00 25.90 16.2 – – – 4.02 –
14.5 2 800 21.8 18.0 – 13.00 23.4 14.6 9.00 7.70 3.80 2.48
HL19B2421S TM8V060A12MP12C 14.5 CF/CM/CU24B 1 625 19.6 15.2 17.00 26.20 16.1 – – – 4.16 –
14.5 2 875 22.2 19.1 – 13.50 23.2 14.5 9.00 7.85 3.90 2.54
HL19B2421S TM8V060A12MP12C 14.5 CF/CM/CU30A 1 625 19.5 15.2 16.00 25.55 15.8 – – – 3.88 –
14.5 2 875 22.6 19.3 – 13.00 23.6 14.6 9.00 7.70 3.84 2.50
HL19B2421S TM8V060A12MP12C 14.5 CF/CM/CU30B 1 625 19.5 15.2 17.00 26.00 15.8 – – – 3.90 –
14.5 2 875 22.8 19.5 – 13.50 23.4 14.5 9.00 7.75 3.90 2.54
HL19B2421S TM8V060A12MP12C 14.5 CF/CM/CU36B 1 625 20.2 15.5 18.00 29.65 16.0 – – – 4.18 –
14.5 2 875 23.6 19.7 – 14.00 23.0 14.4 9.60 8.05 4.02 2.66
HL19B2421S TM8V060A12MP12C 14.5 CF/CM36A 1 625 20.2 15.5 18.00 29.30 16.1 – – – 4.16 –
14.5 2 875 23.6 19.7 – 14.00 23.0 14.5 9.50 8.00 3.96 2.62
HL19B2421S TM8V080B12MP12C 17.5 CF/CM/CU24C 1 600 19.3 14.8 17.00 25.70 16.1 – – – 4.10 –
17.5 2 875 22.2 19.1 – 13.00 23.4 14.6 9.00 7.80 3.86 2.52
HL19B2421S TM8V080B12MP12C 17.5 CF/CM/CU30B 1 550 19.2 14.1 16.00 25.30 15.8 – – – 3.76 –
17.5 2 825 22.6 18.7 – 13.00 23.2 14.5 9.00 7.70 3.82 2.52
HL19B2421S TM8V080B12MP12C 17.5 CF/CM/CU30C 1 550 19.2 14.1 17.00 25.45 15.8 – – – 3.76 –
17.5 2 825 22.6 18.7 – 13.50 23.2 14.5 9.00 7.75 3.82 2.54
HL19B2421S TM8V080B12MP12C 17.5 CF/CM/CU36B 1 550 20.0 14.4 18.00 27.10 16.0 – – – 4.02 –
17.5 2 825 23.4 19.0 – 14.00 23.0 14.4 9.50 7.95 3.96 2.62
HL19B2421S TM8V080B12MP12C 17.5 CF/CM/CU36C 1 550 20.0 14.5 18.00 27.30 16.0 – – – 4.04 –
17.5 2 825 23.6 19.2 – 14.00 22.8 14.4 9.50 8.00 3.98 2.62
HL19B2421S TM8V080C16MP12C 21.0 CF/CM/CU24C 1 625 19.6 15.2 17.00 26.60 16.1 – – – 4.18 –
21.0 2 875 22.4 19.3 – 13.50 23.2 14.4 9.00 7.90 3.96 2.58
HL19B2421S TM8V080C16MP12C 21.0 CF/CM/CU30C 1 625 19.6 15.3 17.00 26.35 15.7 – – – 3.92 –
21.0 2 875 22.8 19.4 – 14.00 23.4 14.4 9.00 7.80 3.94 2.56
HL19B2421S TM8V080C16MP12C 21.0 CF/CM/CU36C 1 625 20.4 15.6 18.00 30.20 16.0 – – – 4.20 –
21.0 2 875 23.8 19.9 – 14.00 22.8 14.3 9.60 8.10 4.08 2.68
HL19B2421S TM8V100C16MP12C 21.0 CF/CM/CU24C 1 625 19.6 15.2 17.00 26.60 16.1 – – – 4.18 –
21.0 2 875 22.4 19.3 – 13.50 23.2 14.4 9.00 7.90 3.96 2.58
HL19B2421S TM8V100C16MP12C 21.0 CF/CM/CU30C 1 625 19.6 15.3 17.00 26.35 15.7 – – – 3.92 –
21.0 2 875 22.8 19.4 – 14.00 23.4 14.4 9.00 7.80 3.94 2.56
HL19B2421S TM8V100C16MP12C 21.0 CF/CM/CU36C 1 625 20.4 15.6 18.00 30.20 16.0 – – – 4.20 –
21.0 2 875 23.8 19.9 – 14.00 22.8 14.3 9.60 8.10 4.08 2.68
HL19B2421S TM9E040A10MP11 14.5 CF/CM/CU24A 1 675 19.3 15.6 15.00 22.60 16.6 – – – 3.90 –
14.5 2 775 21.4 17.5 – 12.00 23.8 15.0 8.50 7.55 3.64 2.40

5496242-FTG-F-0620
10 Johnson Controls Unitary Products
HL19B2421S TM9E040A10MP11 14.5 CF/CM/CU24B 1 700 19.5 15.9 15.00 23.10 16.5 – – – 4.00 –
14.5 2 825 21.8 18.2 – 12.00 23.6 14.8 8.50 7.70 3.70 2.46
HL19B2421S TM9E040A10MP11 14.5 CF/CM/CU30A 1 675 19.7 15.7 15.00 23.25 16.1 – – – 3.72 –
14.5 2 775 22.0 17.7 – 12.00 23.8 14.9 8.50 7.50 3.62 2.40
HL19B2421S TM9E040A10MP11 14.5 CF/CM/CU30B 1 700 19.7 16.1 15.00 23.65 16.1 – – – 3.78 –
14.5 2 825 22.4 18.6 – 12.50 23.6 14.8 9.00 7.65 3.70 2.46
HL19B2421S TM9E040A10MP11 14.5 CF/CM/CU36B 1 700 20.4 16.4 16.00 24.30 16.4 – – – 4.02 –
14.5 2 825 23.2 18.8 – 13.00 23.2 14.7 9.00 7.85 3.82 2.54
HL19B2421S TM9E040A10MP11 14.5 CF/CM36A 1 700 20.4 16.4 16.00 24.10 16.4 – – – 4.02 –
14.5 2 775 23.0 18.1 – 13.00 23.2 14.8 9.00 7.85 3.78 2.52
HL19B2421S TM9E080B12MP11 17.5 CF/CM/CU30B 1 725 20.0 16.6 16.00 26.30 15.9 – – – 3.96 –
17.5 2 900 22.8 19.7 – 13.00 23.4 14.5 9.00 7.75 3.88 2.52
HL19B2421S TM9E080B12MP11 17.5 CF/CM/CU36B 1 725 20.6 16.8 18.00 27.00 16.1 – – – 4.24 –
17.5 2 900 23.8 20.2 – 14.00 23.0 14.4 9.60 8.05 4.00 2.64
HL19B2421S TM9V060B12MP12C 17.5 CF/CM/CU24B 1 525 19.1 13.8 17.00 25.90 16.2 – – – 3.92 –
17.5 2 775 21.8 17.8 – 13.00 23.4 14.6 9.00 7.65 3.80 2.48
HL19B2421S TM9V060B12MP12C 17.5 CF/CM/CU24C 1 525 19.1 13.7 17.00 26.00 16.2 – – – 3.92 –
17.5 2 775 21.8 17.8 – 13.00 23.4 14.6 9.00 7.70 3.80 2.48
HL19B2421S TM9V060B12MP12C 17.5 CF/CM/CU30B 1 575 19.6 14.6 16.00 25.05 15.7 – – – 3.84 –
17.5 2 875 22.6 19.3 – 13.00 23.6 14.6 9.00 7.70 3.86 2.52
HL19B2421S TM9V060B12MP12C 17.5 CF/CM/CU30C 1 575 19.6 14.6 17.00 25.25 15.7 – – – 3.86 –
17.5 2 875 22.8 19.5 – 13.50 23.4 14.5 9.00 7.70 3.88 2.52
HL19B2421S TM9V060B12MP12C 17.5 CF/CM/CU36B 1 575 20.2 14.8 18.00 27.30 16.0 – – – 4.08 –
17.5 2 875 23.6 19.7 – 14.00 23.0 14.5 9.50 8.00 3.96 2.62
HL19B2421S TM9V060B12MP12C 17.5 CF/CM/CU36C 1 575 20.2 14.8 18.00 27.55 16.0 – – – 4.08 –
17.5 2 875 23.6 19.7 – 14.00 23.0 14.4 9.60 8.00 4.00 2.64
HL19B2421S TM9V080B12MP12C 17.5 CF/CM/CU24B 1 600 19.3 14.8 17.00 25.90 16.1 – – – 4.12 –
17.5 2 875 22.2 19.1 – 13.50 23.2 14.5 9.00 7.85 3.90 2.54
HL19B2421S TM9V080B12MP12C 17.5 CF/CM/CU24C 1 600 19.3 14.8 17.00 26.05 16.1 – – – 4.14 –
17.5 2 850 22.2 18.8 – 13.50 23.2 14.5 9.00 7.85 3.92 2.56
HL19B2421S TM9V080B12MP12C 17.5 CF/CM/CU30B 1 550 19.3 14.2 17.00 25.55 15.8 – – – 3.78 –
17.5 2 800 22.6 18.4 – 13.50 23.4 14.5 9.00 7.70 3.86 2.52
HL19B2421S TM9V080B12MP12C 17.5 CF/CM/CU30C 1 600 19.6 15.0 17.00 25.80 15.7 – – – 3.88 –
17.5 2 850 22.8 19.2 – 13.50 23.4 14.5 9.00 7.75 3.92 2.52
HL19B2421S TM9V080B12MP12C 17.5 CF/CM/CU36B 1 600 20.2 15.2 18.00 27.50 16.0 – – – 4.14 –
17.5 2 850 23.6 19.5 – 14.00 23.0 14.4 9.60 8.05 4.00 2.64
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
Johnson Controls Unitary Products 11
HL19B2421S TM9V080B12MP12C 17.5 CF/CM/CU36C 1 600 20.4 15.3 18.00 27.75 16.0 – – – 4.16 –
17.5 2 850 23.6 19.4 – 14.00 22.8 14.3 9.60 8.05 4.04 2.66
HL19B2421S TM9V100C16MP12C 21.0 CF/CM/CU30C 1 675 20.0 16.0 17.00 27.00 15.8 – – – 3.98 –
21.0 2 900 23.0 19.9 – 14.00 23.2 14.4 9.00 7.80 3.94 2.56
HL19B2421S TM9V100C16MP12C 21.0 CF/CM/CU36C 1 675 20.6 16.3 18.00 27.85 16.0 – – – 4.28 –
21.0 2 900 23.8 20.2 – 14.00 22.8 14.3 9.60 8.15 4.10 2.68
HL19B2421S TM9Y040A10MP11 14.5 CF/CM/CU24A 1 675 19.3 15.6 15.00 22.60 16.6 – – – 3.90 –
14.5 2 775 21.4 17.5 – 12.00 23.8 15.0 8.50 7.55 3.64 2.40
HL19B2421S TM9Y040A10MP11 14.5 CF/CM/CU24B 1 700 19.5 15.9 15.00 23.10 16.5 – – – 4.00 –
14.5 2 825 21.8 18.2 – 12.00 23.6 14.8 8.50 7.70 3.70 2.46
HL19B2421S TM9Y040A10MP11 14.5 CF/CM/CU30A 1 675 19.7 15.7 15.00 23.25 16.1 – – – 3.72 –
14.5 2 775 22.0 17.7 – 12.00 23.8 14.9 8.50 7.50 3.62 2.40
HL19B2421S TM9Y040A10MP11 14.5 CF/CM/CU30B 1 700 19.7 16.1 15.00 23.65 16.1 – – – 3.78 –
14.5 2 825 22.4 18.6 – 12.50 23.6 14.8 9.00 7.65 3.70 2.46
HL19B2421S TM9Y040A10MP11 14.5 CF/CM/CU36B 1 700 20.4 16.4 16.00 24.30 16.4 – – – 4.02 –
14.5 2 825 23.2 18.8 – 13.00 23.2 14.7 9.00 7.85 3.82 2.54
HL19B2421S TM9Y040A10MP11 14.5 CF/CM36A 1 700 20.4 16.4 16.00 24.10 16.4 – – – 4.02 –
14.5 2 775 23.0 18.1 – 13.00 23.2 14.8 9.00 7.85 3.78 2.52
HL19B2421S TM9Y080B12MP11 17.5 CF/CM/CU30B 1 725 20.0 16.6 16.00 26.30 15.9 – – – 3.96 –
17.5 2 900 22.8 19.7 – 13.00 23.4 14.5 9.00 7.75 3.88 2.52
HL19B2421S TM9Y080B12MP11 17.5 CF/CM/CU36B 1 725 20.6 16.8 18.00 27.00 16.1 – – – 4.24 –
17.5 2 900 23.8 20.2 – 14.00 23.0 14.4 9.60 8.05 4.00 2.64
HL19B2421S TMLV060A12MP12C 14.5 CF/CM/CU24A 1 575 19.4 14.5 17.00 25.90 16.2 – – – 4.02 –
14.5 2 800 21.8 18.0 – 13.00 23.4 14.6 9.00 7.70 3.80 2.48
HL19B2421S TMLV060A12MP12C 14.5 CF/CM/CU24B 1 625 19.6 15.2 17.00 26.20 16.1 – – – 4.16 –
14.5 2 875 22.2 19.1 – 13.50 23.2 14.5 9.00 7.85 3.90 2.54
HL19B2421S TMLV060A12MP12C 14.5 CF/CM/CU30A 1 625 19.5 15.2 16.00 25.55 15.8 – – – 3.88 –
14.5 2 875 22.6 19.3 – 13.00 23.6 14.6 9.00 7.70 3.84 2.50
HL19B2421S TMLV060A12MP12C 14.5 CF/CM/CU30B 1 625 19.5 15.2 17.00 26.00 15.8 – – – 3.90 –
14.5 2 875 22.8 19.5 – 13.50 23.4 14.5 9.00 7.75 3.90 2.54
HL19B2421S TMLV060A12MP12C 14.5 CF/CM/CU36B 1 625 20.2 15.5 18.00 29.65 16.0 – – – 4.18 –
14.5 2 875 23.6 19.7 – 14.00 23.0 14.4 9.60 8.05 4.02 2.66
HL19B2421S TMLV060A12MP12C 14.5 CF/CM36A 1 625 20.2 15.5 18.00 29.30 16.1 – – – 4.16 –
14.5 2 875 23.6 19.7 – 14.00 23.0 14.5 9.50 8.00 3.96 2.62
HL19B2421S TMLV080B12MP12C 17.5 CF/CM/CU24C 1 600 19.3 14.8 17.00 25.70 16.1 – – – 4.10 –
17.5 2 875 22.2 19.1 – 13.00 23.4 14.6 9.00 7.80 3.86 2.52
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
12 Johnson Controls Unitary Products
HL19B2421S TMLV080B12MP12C 17.5 CF/CM/CU30B 1 550 19.2 14.1 16.00 25.30 15.8 – – – 3.76 –
17.5 2 825 22.6 18.7 – 13.00 23.2 14.5 9.00 7.70 3.82 2.52
HL19B2421S TMLV080B12MP12C 17.5 CF/CM/CU30C 1 550 19.2 14.1 17.00 25.45 15.8 – – – 3.76 –
17.5 2 825 22.6 18.7 – 13.50 23.2 14.5 9.00 7.75 3.82 2.54
HL19B2421S TMLV080B12MP12C 17.5 CF/CM/CU36B 1 550 20.0 14.4 18.00 27.10 16.0 – – – 4.02 –
17.5 2 825 23.4 19.0 – 14.00 23.0 14.4 9.50 7.95 3.96 2.62
HL19B2421S TMLV080B12MP12C 17.5 CF/CM/CU36C 1 550 20.0 14.5 18.00 27.30 16.0 – – – 4.04 –
17.5 2 825 23.6 19.2 – 14.00 22.8 14.4 9.50 8.00 3.98 2.62
HL19B2421S TMLV080C16MP12C 21.0 CF/CM/CU24C 1 625 19.6 15.2 17.00 26.60 16.1 – – – 4.18 –
21.0 2 875 22.4 19.3 – 13.50 23.2 14.4 9.00 7.90 3.96 2.58
HL19B2421S TMLV080C16MP12C 21.0 CF/CM/CU30C 1 625 19.6 15.3 17.00 26.35 15.7 – – – 3.92 –
21.0 2 875 22.8 19.4 – 14.00 23.4 14.4 9.00 7.80 3.94 2.56
HL19B2421S TMLV080C16MP12C 21.0 CF/CM/CU36C 1 625 20.4 15.6 18.00 30.20 16.0 – – – 4.20 –
21.0 2 875 23.8 19.9 – 14.00 22.8 14.3 9.60 8.10 4.08 2.68
HL19B2421S TMLV100C16MP12C 21.0 CF/CM/CU24C 1 625 19.6 15.2 17.00 26.60 16.1 – – – 4.18 –
21.0 2 875 22.4 19.3 – 13.50 23.2 14.4 9.00 7.90 3.96 2.58
HL19B2421S TMLV100C16MP12C 21.0 CF/CM/CU30C 1 625 19.6 15.3 17.00 26.35 15.7 – – – 3.92 –
21.0 2 875 22.8 19.4 – 14.00 23.4 14.4 9.00 7.80 3.94 2.56
HL19B2421S TMLV100C16MP12C 21.0 CF/CM/CU36C 1 625 20.4 15.6 18.00 30.20 16.0 – – – 4.20 –
21.0 2 875 23.8 19.9 – 14.00 22.8 14.3 9.60 8.10 4.08 2.68
HL19B2421S TP9C060B12MP13C 17.5 CF/CM/CU24B 1 525 19.1 13.8 17.00 25.90 16.2 – – – 3.92 –
17.5 2 775 21.8 17.8 – 13.00 23.4 14.6 9.00 7.65 3.80 2.48
HL19B2421S TP9C060B12MP13C 17.5 CF/CM/CU24C 1 525 19.1 13.7 17.00 26.00 16.2 – – – 3.92 –
17.5 2 775 21.8 17.8 – 13.00 23.4 14.6 9.00 7.70 3.80 2.48
HL19B2421S TP9C060B12MP13C 17.5 CF/CM/CU30B 1 575 19.6 14.6 16.00 25.05 15.7 – – – 3.84 –
17.5 2 875 22.6 19.3 – 13.00 23.6 14.6 9.00 7.70 3.86 2.52
HL19B2421S TP9C060B12MP13C 17.5 CF/CM/CU30C 1 575 19.6 14.6 17.00 25.25 15.7 – – – 3.86 –
17.5 2 875 22.8 19.5 – 13.50 23.4 14.5 9.00 7.70 3.88 2.52
HL19B2421S TP9C060B12MP13C 17.5 CF/CM/CU36B 1 575 20.2 14.8 18.00 27.30 16.0 – – – 4.08 –
17.5 2 875 23.6 19.7 – 14.00 23.0 14.5 9.50 8.00 3.96 2.62
HL19B2421S TP9C060B12MP13C 17.5 CF/CM/CU36C 1 575 20.2 14.8 18.00 27.55 16.0 – – – 4.08 –
17.5 2 875 23.6 19.7 – 14.00 23.0 14.4 9.60 8.00 4.00 2.64
HL19B2421S TP9C080B12MP13C 17.5 CF/CM/CU24B 1 600 19.3 14.8 17.00 25.90 16.1 – – – 4.12 –
17.5 2 875 22.2 19.1 – 13.50 23.2 14.5 9.00 7.85 3.90 2.54
HL19B2421S TP9C080B12MP13C 17.5 CF/CM/CU24C 1 600 19.3 14.8 17.00 26.05 16.1 – – – 4.14 –
17.5 2 850 22.2 18.8 – 13.50 23.2 14.5 9.00 7.85 3.92 2.56
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
Johnson Controls Unitary Products 13
HL19B2421S TP9C080B12MP13C 17.5 CF/CM/CU30B 1 550 19.3 14.2 17.00 25.55 15.8 – – – 3.78 –
17.5 2 800 22.6 18.4 – 13.50 23.4 14.5 9.00 7.70 3.86 2.52
HL19B2421S TP9C080B12MP13C 17.5 CF/CM/CU30C 1 600 19.6 15.0 17.00 25.80 15.7 – – – 3.88 –
17.5 2 850 22.8 19.2 – 13.50 23.4 14.5 9.00 7.75 3.92 2.52
HL19B2421S TP9C080B12MP13C 17.5 CF/CM/CU36B 1 600 20.2 15.2 18.00 27.50 16.0 – – – 4.14 –
17.5 2 850 23.6 19.5 – 14.00 23.0 14.4 9.60 8.05 4.00 2.64
HL19B2421S TP9C080B12MP13C 17.5 CF/CM/CU36C 1 600 20.4 15.3 18.00 27.75 16.0 – – – 4.16 –
17.5 2 850 23.6 19.4 – 14.00 22.8 14.3 9.60 8.05 4.04 2.66
HL19B2421S TP9C100C16MP13C 21.0 CF/CM/CU30C 1 675 20.0 16.0 17.00 27.00 15.8 – – – 3.98 –
21.0 2 900 23.0 19.9 – 14.00 23.2 14.4 9.00 7.80 3.94 2.56
HL19B2421S TP9C100C16MP13C 21.0 CF/CM/CU36C 1 675 20.6 16.3 18.00 27.85 16.0 – – – 4.28 –
21.0 2 900 23.8 20.2 – 14.00 22.8 14.3 9.60 8.15 4.10 2.68
HL19B2421S TPLC060A12MP13C 14.5 CF/CM/CU24A 1 575 19.4 14.5 17.00 25.90 16.2 – – – 4.02 –
14.5 2 800 21.8 18.0 – 13.00 23.4 14.6 9.00 7.70 3.80 2.48
HL19B2421S TPLC060A12MP13C 14.5 CF/CM/CU24B 1 625 19.6 15.2 17.00 26.20 16.1 – – – 4.16 –
14.5 2 875 22.2 19.1 – 13.50 23.2 14.5 9.00 7.85 3.90 2.54
HL19B2421S TPLC060A12MP13C 14.5 CF/CM/CU30A 1 625 19.5 15.2 16.00 25.55 15.8 – – – 3.88 –
14.5 2 875 22.6 19.3 – 13.00 23.6 14.6 9.00 7.70 3.84 2.50
HL19B2421S TPLC060A12MP13C 14.5 CF/CM/CU30B 1 625 19.5 15.2 17.00 26.00 15.8 – – – 3.90 –
14.5 2 875 22.8 19.5 – 13.50 23.4 14.5 9.00 7.75 3.90 2.54
HL19B2421S TPLC060A12MP13C 14.5 CF/CM/CU36B 1 625 20.2 15.5 18.00 29.65 16.0 – – – 4.18 –
14.5 2 875 23.6 19.7 – 14.00 23.0 14.4 9.60 8.05 4.02 2.66
HL19B2421S TPLC060A12MP13C 14.5 CF/CM36A 1 625 20.2 15.5 18.00 29.30 16.1 – – – 4.16 –
14.5 2 875 23.6 19.7 – 14.00 23.0 14.5 9.50 8.00 3.96 2.62
HL19B2421S TPLC080B12MP13C 17.5 CF/CM/CU24C 1 600 19.3 14.8 17.00 25.70 16.1 – – – 4.10 –
17.5 2 875 22.2 19.1 – 13.00 23.4 14.6 9.00 7.80 3.86 2.52
HL19B2421S TPLC080B12MP13C 17.5 CF/CM/CU30B 1 550 19.2 14.1 16.00 25.30 15.8 – – – 3.76 –
17.5 2 825 22.6 18.7 – 13.00 23.2 14.5 9.00 7.70 3.82 2.52
HL19B2421S TPLC080B12MP13C 17.5 CF/CM/CU30C 1 550 19.2 14.1 17.00 25.45 15.8 – – – 3.76 –
17.5 2 825 22.6 18.7 – 13.50 23.2 14.5 9.00 7.75 3.82 2.54
HL19B2421S TPLC080B12MP13C 17.5 CF/CM/CU36B 1 550 20.0 14.4 18.00 27.10 16.0 – – – 4.02 –
17.5 2 825 23.4 19.0 – 14.00 23.0 14.4 9.50 7.95 3.96 2.62
HL19B2421S TPLC080B12MP13C 17.5 CF/CM/CU36C 1 550 20.0 14.5 18.00 27.30 16.0 – – – 4.04 –
17.5 2 825 23.6 19.2 – 14.00 22.8 14.4 9.50 8.00 3.98 2.62
HL19B2421S TPLC080C16MP13C 21.0 CF/CM/CU24C 1 625 19.6 15.2 17.00 26.60 16.1 – – – 4.18 –
21.0 2 875 22.4 19.3 – 13.50 23.2 14.4 9.00 7.90 3.96 2.58
HL19B2421S TPLC080C16MP13C 21.0 CF/CM/CU30C 1 625 19.6 15.3 17.00 26.35 15.7 – – – 3.92 –
21.0 2 875 22.8 19.4 – 14.00 23.4 14.4 9.00 7.80 3.94 2.56
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
14 Johnson Controls Unitary Products
HL19B2421S TPLC080C16MP13C 21.0 CF/CM/CU36C 1 625 20.4 15.6 18.00 30.20 16.0 – – – 4.20 –
21.0 2 875 23.8 19.9 – 14.00 22.8 14.3 9.60 8.10 4.08 2.68
HL19B2421S TPLC100C16MP13C 21.0 CF/CM/CU24C 1 625 19.6 15.2 17.00 26.60 16.1 – – – 4.18 –
21.0 2 875 22.4 19.3 – 13.50 23.2 14.4 9.00 7.90 3.96 2.58
HL19B2421S TPLC100C16MP13C 21.0 CF/CM/CU30C 1 625 19.6 15.3 17.00 26.35 15.7 – – – 3.92 –
21.0 2 875 22.8 19.4 – 14.00 23.4 14.4 9.00 7.80 3.94 2.56
HL19B2421S TPLC100C16MP13C 21.0 CF/CM/CU36C 1 625 20.4 15.6 18.00 30.20 16.0 – – – 4.20 –
21.0 2 875 23.8 19.9 – 14.00 22.8 14.3 9.60 8.10 4.08 2.68
HL19B3621S TM8V060A12MP12C 14.5 CF/CM/CU36B 1 675 27.4 19.1 17.00 24.30 28.6 – – – 4.02 –
14.5 2 975 34.0 25.0 – 13.00 35.2 21.8 9.50 8.25 3.74 2.68
HL19B3621S TM8V060A12MP12C 14.5 CF42B 1 675 27.4 19.0 17.00 24.50 28.4 – – – 3.50 –
14.5 2 975 33.2 24.8 – 13.00 35.2 21.8 9.25 8.15 3.68 2.68
HL19B3621S TM8V080B12MP12C 17.5 CF/CM/CU36C 1 675 27.2 19.0 17.00 24.00 28.6 – – – 4.00 –
17.5 2 1000 34.4 25.4 – 13.00 35.4 21.8 9.00 8.25 3.74 2.68
HL19B3621S TM8V080B12MP12C 17.5 CF/CM/CU42C 1 675 27.6 19.1 17.00 24.45 28.6 – – – 3.42 –
17.5 2 1000 33.4 25.0 – 13.00 35.4 21.8 9.00 8.10 3.62 2.68
HL19B3621S TM8V080B12MP12C 17.5 CF/CM/CU48C 1 675 28.2 19.4 17.00 25.30 24.4 – – – 3.30 –
17.5 2 1000 35.0 25.8 – 13.00 35.8 21.8 9.00 8.05 3.80 2.68
HL19B3621S TM8V080B12MP12C 17.5 CF/CM/CU60C 1 800 29.8 21.6 18.00 25.80 24.6 – – – 3.42 –
17.5 2 1200 35.2 28.0 – 13.00 36.0 22.4 9.60 8.40 3.72 2.82
HL19B3621S TM8V080C16MP12C 21.0 CF/CM/CU36C 1 700 27.4 19.4 17.00 24.65 28.4 – – – 4.46 –
21.0 2 1050 34.6 26.2 – 13.00 34.8 21.8 9.50 8.40 4.08 2.68
HL19B3621S TM8V080C16MP12C 21.0 CF/CM/CU42C 1 650 27.6 18.8 17.00 24.45 28.6 – – – 3.30 –
21.0 2 950 33.8 24.8 – 13.00 35.4 21.8 9.00 8.05 3.58 2.68
HL19B3621S TM8V080C16MP12C 21.0 CF/CM/CU42D 1 700 28.6 19.8 17.00 25.65 28.8 – – – 3.24 –
21.0 2 1050 34.0 26.0 – 13.00 35.6 21.8 9.00 8.05 3.54 2.68
HL19B3621S TM8V080C16MP12C 21.0 CF/CM/CU48C 1 650 28.2 19.1 18.00 25.80 24.4 – – – 3.24 –
21.0 2 950 34.8 25.2 – 14.00 35.6 21.8 9.00 8.05 3.82 2.68
HL19B3621S TM8V080C16MP12C 21.0 CF/CM/CU48D 1 700 28.8 20.0 18.00 26.15 24.4 – – – 3.40 –
21.0 2 1050 35.4 26.6 – 14.00 35.6 21.8 9.50 8.10 3.88 2.68
HL19B3621S TM8V080C16MP12C 21.0 CF/CM/CU60C 1 800 29.6 21.4 18.00 26.50 24.0 – – – 3.80 –
21.0 2 1150 35.6 28.0 – 14.00 35.2 22.4 10.00 8.60 4.16 2.82
HL19B3621S TM8V080C16MP12C 21.0 CF/CM/CU60D 1 800 29.6 21.4 18.00 26.60 24.0 – – – 3.80 –
21.0 2 1150 35.8 28.0 – 14.00 35.2 22.4 10.00 8.65 4.18 2.82
HL19B3621S TM8V100C16MP12C 21.0 CF/CM/CU36C 1 700 27.4 19.4 17.00 24.65 28.4 – – – 4.46 –
21.0 2 1050 34.6 26.2 – 13.00 34.8 21.8 9.50 8.40 4.08 2.68
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
Johnson Controls Unitary Products 15
HL19B3621S TM8V100C16MP12C 21.0 CF/CM/CU42C 1 650 27.6 18.8 17.00 24.45 28.6 – – – 3.30 –
21.0 2 950 33.8 24.8 – 13.00 35.4 21.8 9.00 8.05 3.58 2.68
HL19B3621S TM8V100C16MP12C 21.0 CF/CM/CU42D 1 700 28.6 19.8 17.00 25.65 28.8 – – – 3.24 –
21.0 2 1050 34.0 26.0 – 13.00 35.6 21.8 9.00 8.05 3.54 2.68
HL19B3621S TM8V100C16MP12C 21.0 CF/CM/CU48C 1 650 28.2 19.1 18.00 25.80 24.4 – – – 3.24 –
21.0 2 950 34.8 25.2 – 14.00 35.6 21.8 9.00 8.05 3.82 2.68
HL19B3621S TM8V100C16MP12C 21.0 CF/CM/CU48D 1 700 28.8 20.0 18.00 26.15 24.4 – – – 3.40 –
21.0 2 1050 35.4 26.6 – 14.00 35.6 21.8 9.50 8.10 3.88 2.68
HL19B3621S TM8V100C16MP12C 21.0 CF/CM/CU60C 1 800 29.6 21.4 18.00 26.50 24.0 – – – 3.80 –
21.0 2 1150 35.6 28.0 – 14.00 35.2 22.4 10.00 8.60 4.16 2.82
HL19B3621S TM8V100C16MP12C 21.0 CF/CM/CU60D 1 800 29.6 21.4 18.00 26.60 24.0 – – – 3.80 –
21.0 2 1150 35.8 28.0 – 14.00 35.2 22.4 10.00 8.65 4.18 2.82
HL19B3621S TM8V100C20MP12C 21.0 CF/CM/CU36C 1 800 28.0 20.8 17.00 25.10 28.6 – – – 4.72 –
21.0 2 1150 35.0 27.6 – 13.00 35.0 21.8 9.50 8.45 4.20 2.68
HL19B3621S TM8V100C20MP12C 21.0 CF/CM/CU42C 1 800 28.8 21.2 18.00 25.65 28.2 – – – 3.76 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.20 3.86 2.68
HL19B3621S TM8V100C20MP12C 21.0 CF/CM/CU42D 1 800 28.8 21.2 18.00 25.70 28.2 – – – 3.76 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.20 3.88 2.68
HL19B3621S TM8V100C20MP12C 21.0 CF/CM/CU48C 1 800 29.4 21.4 18.00 26.65 24.2 – – – 3.54 –
21.0 2 1150 35.8 27.8 – 14.00 35.6 21.8 9.00 8.15 3.94 2.68
HL19B3621S TM8V100C20MP12C 21.0 CF/CM/CU48D 1 800 29.4 21.4 18.00 26.70 24.2 – – – 3.56 –
21.0 2 1150 35.8 27.8 – 14.00 35.6 21.8 9.50 8.15 3.94 2.68
HL19B3621S TM8V100C20MP12C 21.0 CF/CM/CU60C 1 800 29.6 21.4 18.00 26.85 24.0 – – – 3.82 –
21.0 2 1150 35.8 28.0 – 14.00 35.0 22.4 10.00 8.65 4.20 2.82
HL19B3621S TM8V100C20MP12C 21.0 CF/CM/CU60D 1 800 29.6 21.6 18.00 26.90 24.0 – – – 3.82 –
21.0 2 1150 35.8 28.2 – 14.00 35.0 22.4 10.00 8.65 4.22 2.82
HL19B3621S TM8V120C20MP12C 21.0 CF/CM/CU36C 1 800 28.0 20.8 17.00 25.10 28.6 – – – 4.72 –
21.0 2 1150 35.0 27.6 – 13.00 35.0 21.8 9.50 8.45 4.20 2.68
HL19B3621S TM8V120C20MP12C 21.0 CF/CM/CU42C 1 800 28.8 21.2 18.00 25.65 28.2 – – – 3.76 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.20 3.86 2.68
HL19B3621S TM8V120C20MP12C 21.0 CF/CM/CU42D 1 800 28.8 21.2 18.00 25.70 28.2 – – – 3.76 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.20 3.88 2.68
HL19B3621S TM8V120C20MP12C 21.0 CF/CM/CU48C 1 800 29.4 21.4 18.00 26.65 24.2 – – – 3.54 –
21.0 2 1150 35.8 27.8 – 14.00 35.6 21.8 9.00 8.15 3.94 2.68
HL19B3621S TM8V120C20MP12C 21.0 CF/CM/CU48D 1 800 29.4 21.4 18.00 26.70 24.2 – – – 3.56 –
21.0 2 1150 35.8 27.8 – 14.00 35.6 21.8 9.50 8.15 3.94 2.68
HL19B3621S TM8V120C20MP12C 21.0 CF/CM/CU60C 1 800 29.6 21.4 18.00 26.85 24.0 – – – 3.82 –
21.0 2 1150 35.8 28.0 – 14.00 35.0 22.4 10.00 8.65 4.20 2.82
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
16 Johnson Controls Unitary Products
HL19B3621S TM8V120C20MP12C 21.0 CF/CM/CU60D 1 800 29.6 21.6 18.00 26.90 24.0 – – – 3.82 –
21.0 2 1150 35.8 28.2 – 14.00 35.0 22.4 10.00 8.65 4.22 2.82
HL19B3621S TM8X060A12MP11 14.5 CF/CM/CU36B 1 950 28.6 22.8 16.00 23.15 29.0 – – – 4.38 –
14.5 2 1125 34.8 27.0 – 13.00 35.6 21.8 9.00 8.30 3.68 2.68
HL19B3621S TM8X060A12MP11 14.5 CF/CM36A 1 925 28.4 22.4 16.00 22.80 29.2 – – – 4.38 –
14.5 2 1075 34.6 26.2 – 13.00 35.6 21.8 9.00 8.30 3.66 2.68
HL19B3621S TM8X060A12MP11 14.5 CF42B 1 950 30.0 23.4 17.00 23.65 29.2 – – – 3.26 –
14.5 2 1125 34.4 27.0 – 13.00 36.0 21.8 8.75 8.00 3.30 2.68
HL19B3621S TM8X080B12MP11 17.5 CF/CM/CU36B 1 1000 28.8 23.6 16.00 23.25 29.0 – – – 4.40 –
17.5 2 1175 34.2 27.4 – 13.00 35.6 21.8 9.00 8.30 3.68 2.68
HL19B3621S TM8X080B12MP11 17.5 CF/CM/CU36C 1 1025 28.8 23.8 16.00 23.55 28.8 – – – 4.68 –
17.5 2 1200 35.2 28.0 – 13.00 35.6 21.8 9.00 8.35 3.86 2.68
HL19B3621S TM8X080B12MP11 17.5 CF/CM/CU42C 1 1025 29.4 24.0 17.00 24.00 28.6 – – – 3.84 –
17.5 2 1200 34.2 27.8 – 13.00 36.0 21.8 9.00 8.15 3.56 2.68
HL19B3621S TM8X080B12MP11 17.5 CF/CM/CU48C 1 1025 30.0 24.4 17.00 24.75 24.6 – – – 3.64 –
17.5 2 1200 36.0 28.4 – 13.00 36.0 21.8 9.00 8.10 3.74 2.68
HL19B3621S TM8X080B12MP11 17.5 CF/CM/CU60C 1 1025 30.8 24.6 18.00 25.25 24.6 – – – 3.68 –
17.5 2 1200 35.6 28.4 – 13.00 36.0 22.4 9.60 8.50 3.82 2.82
HL19B3621S TM8X080B12MP11 17.5 CF42B 1 1000 29.8 23.8 17.00 23.85 28.2 – – – 4.10 –
17.5 2 1150 34.0 27.0 – 13.00 35.8 21.8 9.00 8.25 3.74 2.68
HL19B3621S TM8X080C16MP11 21.0 CF/CM/CU36C 1 1000 28.0 23.2 17.00 23.70 28.6 – – – 5.06 –
21.0 2 1150 35.0 27.4 – 13.00 35.0 21.8 9.50 8.45 4.16 2.68
HL19B3621S TM8X080C16MP11 21.0 CF/CM/CU42C 1 1000 30.0 24.0 17.00 25.05 28.0 – – – 4.18 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.30 3.84 2.68
HL19B3621S TM8X080C16MP11 21.0 CF/CM/CU42D 1 1000 30.2 24.2 17.00 25.15 28.8 – – – 3.54 –
21.0 2 1175 35.0 27.8 – 13.00 35.8 21.8 9.00 8.10 3.38 2.68
HL19B3621S TM8X080C16MP11 21.0 CF/CM/CU48C 1 1000 30.0 24.2 18.00 25.65 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8X080C16MP11 21.0 CF/CM/CU48D 1 1000 30.0 24.2 18.00 25.70 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8X080C16MP11 21.0 CF/CM/CU60C 1 1000 30.4 24.2 18.00 25.95 24.2 – – – 4.02 –
21.0 2 1150 35.8 28.0 – 14.00 35.2 22.4 10.00 8.70 4.16 2.82
HL19B3621S TM8X080C16MP11 21.0 CF/CM/CU60D 1 1000 31.4 24.6 19.00 26.80 24.6 – – – 3.34 –
21.0 2 1175 36.0 28.2 – 14.00 36.0 22.4 9.60 8.40 3.64 2.82
HL19B3621S TM8X100C16MP11 21.0 CF/CM/CU36C 1 1000 28.0 23.2 17.00 23.70 28.6 – – – 5.06 –
21.0 2 1150 35.0 27.4 – 13.00 35.0 21.8 9.50 8.45 4.16 2.68
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
Johnson Controls Unitary Products 17
HL19B3621S TM8X100C16MP11 21.0 CF/CM/CU42C 1 1000 30.0 24.0 17.00 25.05 28.0 – – – 4.18 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.30 3.84 2.68
HL19B3621S TM8X100C16MP11 21.0 CF/CM/CU42D 1 1000 30.2 24.2 17.00 25.15 28.8 – – – 3.54 –
21.0 2 1175 35.0 27.8 – 13.00 35.8 21.8 9.00 8.10 3.38 2.68
HL19B3621S TM8X100C16MP11 21.0 CF/CM/CU48C 1 1000 30.0 24.2 18.00 25.65 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8X100C16MP11 21.0 CF/CM/CU48D 1 1000 30.0 24.2 18.00 25.70 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8X100C16MP11 21.0 CF/CM/CU60C 1 1000 30.4 24.2 18.00 25.95 24.2 – – – 4.02 –
21.0 2 1150 35.8 28.0 – 14.00 35.2 22.4 10.00 8.70 4.16 2.82
HL19B3621S TM8X100C16MP11 21.0 CF/CM/CU60D 1 1000 31.4 24.6 19.00 26.80 24.6 – – – 3.34 –
21.0 2 1175 36.0 28.2 – 14.00 36.0 22.4 9.60 8.40 3.64 2.82
HL19B3621S TM8X100C20MP11 21.0 CF/CM/CU36C 1 1025 29.0 24.0 17.00 24.60 28.8 – – – 4.50 –
21.0 2 1225 34.8 28.4 – 13.00 35.4 21.8 9.50 8.35 3.80 2.68
HL19B3621S TM8X100C20MP11 21.0 CF/CM/CU42C 1 1025 29.8 24.2 18.00 25.35 28.0 – – – 4.24 –
21.0 2 1225 34.6 28.2 – 13.00 35.4 21.8 9.60 8.30 3.94 2.68
HL19B3621S TM8X100C20MP11 21.0 CF/CM/CU42D 1 1050 29.8 24.6 18.00 25.50 27.8 – – – 4.36 –
21.0 2 1250 34.6 28.6 – 13.00 35.0 21.8 9.60 8.35 3.98 2.68
HL19B3621S TM8X100C20MP11 21.0 CF/CM/CU48C 1 1050 30.4 25.0 18.00 26.05 24.4 – – – 3.80 –
21.0 2 1225 36.0 28.8 – 14.00 35.8 21.8 9.50 8.20 3.88 2.68
HL19B3621S TM8X100C20MP11 21.0 CF/CM/CU48D 1 1050 30.4 25.0 18.00 26.10 24.4 – – – 3.82 –
21.0 2 1250 36.0 29.0 – 14.00 35.6 21.8 9.50 8.20 3.94 2.68
HL19B3621S TM8X100C20MP11 21.0 CF/CM/CU60C 1 1025 30.6 24.6 18.00 26.30 24.2 – – – 4.10 –
21.0 2 1225 36.0 29.0 – 14.00 35.0 22.4 10.00 8.70 4.20 2.82
HL19B3621S TM8X100C20MP11 21.0 CF/CM/CU60D 1 1050 30.6 24.8 18.00 26.40 24.0 – – – 4.16 –
21.0 2 1250 36.0 29.2 – 14.00 34.8 22.4 10.00 8.75 4.34 2.82
HL19B3621S TM8X120C20MP11 21.0 CF/CM/CU36C 1 1025 29.0 24.0 17.00 24.60 28.8 – – – 4.50 –
21.0 2 1225 34.8 28.4 – 13.00 35.4 21.8 9.50 8.35 3.80 2.68
HL19B3621S TM8X120C20MP11 21.0 CF/CM/CU42C 1 1025 29.8 24.2 18.00 25.35 28.0 – – – 4.24 –
21.0 2 1225 34.6 28.2 – 13.00 35.4 21.8 9.60 8.30 3.94 2.68
HL19B3621S TM8X120C20MP11 21.0 CF/CM/CU42D 1 1050 29.8 24.6 18.00 25.50 27.8 – – – 4.36 –
21.0 2 1250 34.6 28.6 – 13.00 35.0 21.8 9.60 8.35 3.98 2.68
HL19B3621S TM8X120C20MP11 21.0 CF/CM/CU48C 1 1050 30.4 25.0 18.00 26.05 24.4 – – – 3.80 –
21.0 2 1225 36.0 28.8 – 14.00 35.8 21.8 9.50 8.20 3.88 2.68
HL19B3621S TM8X120C20MP11 21.0 CF/CM/CU48D 1 1050 30.4 25.0 18.00 26.10 24.4 – – – 3.82 –
21.0 2 1250 36.0 29.0 – 14.00 35.6 21.8 9.50 8.20 3.94 2.68
HL19B3621S TM8X120C20MP11 21.0 CF/CM/CU60C 1 1025 30.6 24.6 18.00 26.30 24.2 – – – 4.10 –
21.0 2 1225 36.0 29.0 – 14.00 35.0 22.4 10.00 8.70 4.20 2.82
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
18 Johnson Controls Unitary Products
HL19B3621S TM8X120C20MP11 21.0 CF/CM/CU60D 1 1050 30.6 24.8 18.00 26.40 24.0 – – – 4.16 –
21.0 2 1250 36.0 29.2 – 14.00 34.8 22.4 10.00 8.75 4.34 2.82
HL19B3621S TM8Y060A12MP11 14.5 CF/CM/CU36B 1 950 28.6 22.8 16.00 23.15 29.0 – – – 4.38 –
14.5 2 1125 34.8 27.0 – 13.00 35.6 21.8 9.00 8.30 3.68 2.68
HL19B3621S TM8Y060A12MP11 14.5 CF/CM36A 1 925 28.4 22.4 16.00 22.80 29.2 – – – 4.38 –
14.5 2 1075 34.6 26.2 – 13.00 35.6 21.8 9.00 8.30 3.66 2.68
HL19B3621S TM8Y060A12MP11 14.5 CF42B 1 950 30.0 23.4 17.00 23.65 29.2 – – – 3.26 –
14.5 2 1125 34.4 27.0 – 13.00 36.0 21.8 8.75 8.00 3.30 2.68
HL19B3621S TM8Y080B12MP11 17.5 CF/CM/CU36B 1 1000 28.8 23.6 16.00 23.25 29.0 – – – 4.40 –
17.5 2 1175 34.2 27.4 – 13.00 35.6 21.8 9.00 8.30 3.68 2.68
HL19B3621S TM8Y080B12MP11 17.5 CF/CM/CU36C 1 1025 28.8 23.8 16.00 23.55 28.8 – – – 4.68 –
17.5 2 1200 35.2 28.0 – 13.00 35.6 21.8 9.00 8.35 3.86 2.68
HL19B3621S TM8Y080B12MP11 17.5 CF/CM/CU42C 1 1025 29.4 24.0 17.00 24.00 28.6 – – – 3.84 –
17.5 2 1200 34.2 27.8 – 13.00 36.0 21.8 9.00 8.15 3.56 2.68
HL19B3621S TM8Y080B12MP11 17.5 CF/CM/CU48C 1 1025 30.0 24.4 17.00 24.75 24.6 – – – 3.64 –
17.5 2 1200 36.0 28.4 – 13.00 36.0 21.8 9.00 8.10 3.74 2.68
HL19B3621S TM8Y080B12MP11 17.5 CF/CM/CU60C 1 1025 30.8 24.6 18.00 25.25 24.6 – – – 3.68 –
17.5 2 1200 35.6 28.4 – 13.00 36.0 22.4 9.60 8.50 3.82 2.82
HL19B3621S TM8Y080B12MP11 17.5 CF42B 1 1000 29.8 23.8 17.00 23.85 28.2 – – – 4.10 –
17.5 2 1150 34.0 27.0 – 13.00 35.8 21.8 9.00 8.25 3.74 2.68
HL19B3621S TM8Y080C16MP11 21.0 CF/CM/CU36C 1 1000 28.0 23.2 17.00 23.70 28.6 – – – 5.06 –
21.0 2 1150 35.0 27.4 – 13.00 35.0 21.8 9.50 8.45 4.16 2.68
HL19B3621S TM8Y080C16MP11 21.0 CF/CM/CU42C 1 1000 30.0 24.0 17.00 25.05 28.0 – – – 4.18 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.30 3.84 2.68
HL19B3621S TM8Y080C16MP11 21.0 CF/CM/CU42D 1 1000 30.2 24.2 17.00 25.15 28.8 – – – 3.54 –
21.0 2 1175 35.0 27.8 – 13.00 35.8 21.8 9.00 8.10 3.38 2.68
HL19B3621S TM8Y080C16MP11 21.0 CF/CM/CU48C 1 1000 30.0 24.2 18.00 25.65 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8Y080C16MP11 21.0 CF/CM/CU48D 1 1000 30.0 24.2 18.00 25.70 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8Y080C16MP11 21.0 CF/CM/CU60C 1 1000 30.4 24.2 18.00 25.95 24.2 – – – 4.02 –
21.0 2 1150 35.8 28.0 – 14.00 35.2 22.4 10.00 8.70 4.16 2.82
HL19B3621S TM8Y080C16MP11 21.0 CF/CM/CU60D 1 1000 31.4 24.6 19.00 26.80 24.6 – – – 3.34 –
21.0 2 1175 36.0 28.2 – 14.00 36.0 22.4 9.60 8.40 3.64 2.82
HL19B3621S TM8Y100C16MP11 21.0 CF/CM/CU36C 1 1000 28.0 23.2 17.00 23.70 28.6 – – – 5.06 –
21.0 2 1150 35.0 27.4 – 13.00 35.0 21.8 9.50 8.45 4.16 2.68
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
Johnson Controls Unitary Products 19
HL19B3621S TM8Y100C16MP11 21.0 CF/CM/CU42C 1 1000 30.0 24.0 17.00 25.05 28.0 – – – 4.18 –
21.0 2 1150 34.4 27.4 – 13.00 35.4 21.8 9.50 8.30 3.84 2.68
HL19B3621S TM8Y100C16MP11 21.0 CF/CM/CU42D 1 1000 30.2 24.2 17.00 25.15 28.8 – – – 3.54 –
21.0 2 1175 35.0 27.8 – 13.00 35.8 21.8 9.00 8.10 3.38 2.68
HL19B3621S TM8Y100C16MP11 21.0 CF/CM/CU48C 1 1000 30.0 24.2 18.00 25.65 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8Y100C16MP11 21.0 CF/CM/CU48D 1 1000 30.0 24.2 18.00 25.70 24.4 – – – 3.84 –
21.0 2 1150 35.8 28.0 – 14.00 35.6 21.8 9.60 8.20 3.90 2.68
HL19B3621S TM8Y100C16MP11 21.0 CF/CM/CU60C 1 1000 30.4 24.2 18.00 25.95 24.2 – – – 4.02 –
21.0 2 1150 35.8 28.0 – 14.00 35.2 22.4 10.00 8.70 4.16 2.82
HL19B3621S TM8Y100C16MP11 21.0 CF/CM/CU60D 1 1000 31.4 24.6 19.00 26.80 24.6 – – – 3.34 –
21.0 2 1175 36.0 28.2 – 14.00 36.0 22.4 9.60 8.40 3.64 2.82
HL19B3621S TM8Y100C20MP11 21.0 CF/CM/CU36C 1 1025 29.0 24.0 17.00 24.60 28.8 – – – 4.50 –
21.0 2 1225 34.8 28.4 – 13.00 35.4 21.8 9.50 8.35 3.80 2.68
HL19B3621S TM8Y100C20MP11 21.0 CF/CM/CU42C 1 1025 29.8 24.2 18.00 25.35 28.0 – – – 4.24 –
21.0 2 1225 34.6 28.2 – 13.00 35.4 21.8 9.60 8.30 3.94 2.68
HL19B3621S TM8Y100C20MP11 21.0 CF/CM/CU42D 1 1050 29.8 24.6 18.00 25.50 27.8 – – – 4.36 –
21.0 2 1250 34.6 28.6 – 13.00 35.0 21.8 9.60 8.35 3.98 2.68
HL19B3621S TM8Y100C20MP11 21.0 CF/CM/CU48C 1 1050 30.4 25.0 18.00 26.05 24.4 – – – 3.80 –
21.0 2 1225 36.0 28.8 – 14.00 35.8 21.8 9.50 8.20 3.88 2.68
HL19B3621S TM8Y100C20MP11 21.0 CF/CM/CU48D 1 1050 30.4 25.0 18.00 26.10 24.4 – – – 3.82 –
21.0 2 1250 36.0 29.0 – 14.00 35.6 21.8 9.50 8.20 3.94 2.68
HL19B3621S TM8Y100C20MP11 21.0 CF/CM/CU60C 1 1025 30.6 24.6 18.00 26.30 24.2 – – – 4.10 –
21.0 2 1225 36.0 29.0 – 14.00 35.0 22.4 10.00 8.70 4.20 2.82
HL19B3621S TM8Y100C20MP11 21.0 CF/CM/CU60D 1 1050 30.6 24.8 18.00 26.40 24.0 – – – 4.16 –
21.0 2 1250 36.0 29.2 – 14.00 34.8 22.4 10.00 8.75 4.34 2.82
HL19B3621S TM8Y120C20MP11 21.0 CF/CM/CU36C 1 1025 29.0 24.0 17.00 24.60 28.8 – – – 4.50 –
21.0 2 1225 34.8 28.4 – 13.00 35.4 21.8 9.50 8.35 3.80 2.68
HL19B3621S TM8Y120C20MP11 21.0 CF/CM/CU42C 1 1025 29.8 24.2 18.00 25.35 28.0 – – – 4.24 –
21.0 2 1225 34.6 28.2 – 13.00 35.4 21.8 9.60 8.30 3.94 2.68
HL19B3621S TM8Y120C20MP11 21.0 CF/CM/CU42D 1 1050 29.8 24.6 18.00 25.50 27.8 – – – 4.36 –
21.0 2 1250 34.6 28.6 – 13.00 35.0 21.8 9.60 8.35 3.98 2.68
HL19B3621S TM8Y120C20MP11 21.0 CF/CM/CU48C 1 1050 30.4 25.0 18.00 26.05 24.4 – – – 3.80 –
21.0 2 1225 36.0 28.8 – 14.00 35.8 21.8 9.50 8.20 3.88 2.68
HL19B3621S TM8Y120C20MP11 21.0 CF/CM/CU48D 1 1050 30.4 25.0 18.00 26.10 24.4 – – – 3.82 –
21.0 2 1250 36.0 29.0 – 14.00 35.6 21.8 9.50 8.20 3.94 2.68
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD

5496242-FTG-F-0620
20 Johnson Controls Unitary Products
HL19B3621S TM8Y120C20MP11 21.0 CF/CM/CU60C 1 1025 30.6 24.6 18.00 26.30 24.2 – – – 4.10 –
21.0 2 1225 36.0 29.0 – 14.00 35.0 22.4 10.00 8.70 4.20 2.82
HL19B3621S TM8Y120C20MP11 21.0 CF/CM/CU60D 1 1050 30.6 24.8 18.00 26.40 24.0 – – – 4.16 –
21.0 2 1250 36.0 29.2 – 14.00 34.8 22.4 10.00 8.75 4.34 2.82
HL19B3621S TM9E080B12MP11 17.5 CF/CM/CU36B 1 900 28.4 22.0 17.00 23.60 29.2 – – – 4.42 –
17.5 2 975 34.2 25.2 – 13.00 35.2 21.8 9.50 8.35 3.74 2.68
HL19B3621S TM9E080B12MP11 17.5 CF/CM/CU36C 1 925 28.8 22.6 17.00 23.95 29.0 – – – 4.44 –
17.5 2 1000 34.6 25.6 – 13.00 35.4 21.8 9.50 8.35 3.80 2.68
HL19B3621S TM9E080B12MP11 17.5 CF/CM/CU42C 1 925 29.6 22.8 17.00 24.15 28.2 – – – 3.98 –
17.5 2 1000 33.6 25.2 – 13.00 35.4 21.8 9.50 8.25 3.66 2.68
HL19B3621S TM9E080B12MP11 17.5 CF/CM/CU48C 1 925 29.8 23.0 17.00 25.15 24.4 – – – 3.72 –
17.5 2 1000 35.2 25.8 – 13.00 35.6 21.8 9.50 8.20 3.84 2.68
HL19B3621S TM9E080B12MP11 17.5 CF/CM/CU60C 1 925 30.0 23.2 17.00 25.20 24.2 – – – 4.02 –
17.5 2 1000 35.6 26.0 – 13.00 35.2 22.4 9.50 8.70 4.06 2.82
HL19B3621S TM9E080B12MP11 17.5 CF42B 1 900 28.6 22.2 17.00 23.30 28.2 – – – 4.02 –
17.5 2 975 33.4 24.8 – 13.00 35.2 21.8 9.50 8.25 3.68 2.68
HL19B3621S TM9E100C16MP11 21.0 CF/CM/CU36C 1 1025 29.0 24.0 17.00 24.05 29.0 – – – 4.46 –
21.0 2 1275 34.4 28.6 – 13.00 35.6 21.8 9.50 8.30 3.60 2.68
HL19B3621S TM9E100C16MP11 21.0 CF/CM/CU42C 1 1025 29.4 24.0 17.00 24.55 28.0 – – – 4.22 –
21.0 2 1275 34.6 28.8 – 13.00 35.4 21.8 9.50 8.30 3.88 2.68
HL19B3621S TM9E100C16MP11 21.0 CF/CM/CU48C 1 1025 30.4 24.6 18.00 25.55 24.4 – – – 3.72 –
21.0 2 1275 35.6 29.2 – 13.00 35.8 21.8 9.60 8.15 3.88 2.68
HL19B3621S TM9E100C16MP11 21.0 CF/CM/CU48D 1 1050 29.4 24.4 18.00 24.85 24.2 – – – 3.94 –
21.0 2 1300 36.0 29.8 – 13.00 35.6 21.8 9.60 8.25 4.06 2.68
HL19B3621S TM9E100C16MP11 21.0 CF/CM/CU60C 1 1025 30.4 24.4 18.00 25.65 24.2 – – – 3.94 –
21.0 2 1275 36.0 29.4 – 14.00 35.6 22.4 10.00 8.65 4.06 2.82
HL19B3621S TM9E100C16MP11 21.0 CF/CM/CU60D 1 1050 30.4 24.8 18.00 25.70 24.2 – – – 4.10 –
21.0 2 1300 35.6 29.6 – 13.00 35.2 22.4 10.00 8.70 4.24 2.82
HL19B3621S TM9E120D20MP11 24.5 CF/CM/CU42D 1 1000 29.6 23.8 18.00 25.40 27.8 – – – 4.30 –
24.5 2 1250 34.6 28.6 – 13.00 35.2 21.8 9.60 8.35 3.96 2.68
HL19B3621S TM9E120D20MP11 24.5 CF/CM/CU48D 1 1000 30.4 24.4 18.00 26.45 24.4 – – – 3.80 –
24.5 2 1250 36.0 29.0 – 14.00 35.6 21.8 9.50 8.20 3.92 2.68
HL19B3621S TM9E120D20MP11 24.5 CF/CM/CU60D 1 1000 30.2 24.2 18.00 26.45 24.0 – – – 4.14 –
24.5 2 1250 36.0 29.2 – 14.00 35.0 22.4 10.00 8.75 4.32 2.82
HL19B3621S TM9V060B12MP12C 17.5 CF/CM/CU36B 1 650 27.0 18.6 17.00 23.95 28.8 – – – 3.98 –
17.5 2 1000 34.4 25.4 – 13.00 35.6 21.8 9.00 8.25 3.72 2.68
SYSTEM CAPACITY - With High Efficiency Motor Furnaces1(Continued)
UNIT
MODEL
FURNACE COIL
MODEL2Stage COOLING HEATING
MODEL WIDTH RATED
CFM NET MBH SEER EER NET MBH HSPF IV HSPF V COP
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD