FreeTrack AVS FT-802 User manual

AVS FT-802 VEHICLE TRACKER
USER GUIDE
Version 2023-12
09 273 3600 freetrackgps.co.nz
Proudly bought to you by
vehicle security specialist AVS
CAR SECURITY

Page 3
WELCOME TO FREETRACK
This is the user and installation guide for the Freetrack AVS FT-802 GPS tracker.
Freetrack is a GPS tracking solution from vehicle security specialist AVS.
All from the easy to use Tracksolid Pro App.
CONTENTS
SIM Card Introduction ...................................................................................................................................... Page 4
Download the Freetrack app ......................................................................................................................... Page 5
Setting Up the app and Adding Your Tracker ......................................................................................... Page 6
Use the List Menu to See the Status Info on Your Tracker ................................................................... Page 7
Status Info ............................................................................................................................................................. Page 8
Device Detail ........................................................................................................................................................ Page 8
Playback Trip History on the Map ................................................................................................................ Page 9
Alerts ...................................................................................................................................................................... Page 11
Page 12
Remote Fuel Kill / Immobilisation ................................................................................................................ Page 14
Geo Fence ............................................................................................................................................................... Page 16
Information for Your Installer
Installing the SIM Card ..................................................................................................................................... Page 18
Wiring Diagram ................................................................................................................................................... Page 19
PIN Out Diagram ................................................................................................................................................ Page 20
Wiring Instructions ............................................................................................................................................ Page 21
Tracker Location ................................................................................................................................................. Page 21
Power Up the Tracker ....................................................................................................................................... Page 22
LED Status Indicators ....................................................................................................................................... Page 22
Troubleshooting ................................................................................................................................................ Page 23
Record Your Device’s Details .......................................................................................................................... Page 23
Support .................................................................................................................................................................. Page 23
AVS and Freetrack are registered trademarks.

Page 4
SIM CARD INTRODUCTION
The tracker requires a SIM card with credit to be able to communicate with the tracking server. This must be a micro size SIM
card with SMS and phone calls enabled, do not use a data only SIM. The tracker is able to operate with most NZ network
providers including Spark, OneNZ and 2 Degrees.
It will work with a prepay SIM however we recommend using an on account SIM to ensure there is always credit. If you choose
to use a prepay SIM it is your responsibility to comply with any network provider terms of service and to ensure the SIM remains
active and has available credit.
Follow the instructions below or
check with your SIM card supplier for latest instructions.
Spark SIM
1. First you need to buy a SIM card online or in store.
2. Pop the SIM card into your phone and go to spark.co.nz/go (on a smartphone) or call *333 from your mobile to activate.
3. You can top up online with a voucher, credit card or debit card and then select your preferred Value Pack from there.
4. While the SIM is in the phone go online and setup a myspark account here: https://www.spark.co.nz/myspark/register to allow
you see account balance and usage.
5. It is recommended that an auto top up is set up if using a prepay SIM.
OneNZ SIM
1. First you need to buy a SIM card online or in store.
2. Pop the SIM card into your phone and go to one.nz/getgoing (on a smartphone) or call 777 from your mobile to
activate.
3. You can top up online with a voucher, credit card or debit card and then select your preferred Value Pack from there.
4. While the SIM is in the phone go online and setup a My One NZ account here https://www.one.nz/#sign-in to allow
you see account balance and usage.
5. It is recommended that an auto top up is set up if using a prepay SIM.
2Degrees SIM
1. First you need to buy a SIM card online or in store.
2. Pop the SIM card into your phone and call 200 from your mobile to activate.
3. You can top up online with a voucher, credit card or debit card and then select your preferred prepay plan from there.
4. While the SIM is in the phone go online and setup a 2Degrees account here https://www.2degreesmobile.co.nz/2d/mobile/
common/login/login.jsp to allow you see account balance and usage.
5. It is recommended that an auto top up is set up if using a prepay SIM.
IMPORTANT!
DO NOT set your mobile number to private/NO CALLER ID otherwise the tracker will not be able to identify you.
DO NOT
YOU MUST ACTIVATE THE SIM CARD (if using a prepay SIM) in another phone before use or it will not work.
Installer note:
Please also see INSTALLING THE SIM CARD on page 18.

Page 5
DOWNLOAD THE TRACKSOLID PRO APP
Or go to the Google Play Store and search for Tracksolid Pro
Or type in this url - https://freetrackgps.co.nz/tracksolidpro-andriod
Or go to the Apple App Store and search for Tracksolid Pro
Or type in this url - https://freetrackgps.co.nz/tracksolidpro-apple
Scan the QR barcode to download the iOS app
Scan the QR barcode to download the Android app

Page 6
SETTING UP THE APP AND ADDING YOUR TRACKER
Download the app to your phone
and tap to open. The app will ask
you to allow access to camera etc.
Tap through each screen until you
get to the login screen and tap
SIGN UP.
Next add your tracker/s to the app.
Start by tapping LIST from the
Home screen.
Tap to open the Add Device
screen.
Tap the barcode scan icon .
Or manually enter the IMEI number and tap
Add Device.
1. Select NEW ZEALAND as the.
region, tap DONE on top right
2. Enter your EMAIL address.
3. Tap the arrow next to
VERIFICATION CODE.
4. Check your email then enter the
code along with a new password and
tap SUBMIT.
You have now successfully signed up!

Page 7
Tap LIST from the Home screen
to open the device list.
Tap on a vehicle to see the
current status information.
Tap the up arrow to expand the
menu and see more information.
See the next page for a summary.
USE THE LIST MENU TO SEE THE STATUS INFO ON YOUR TRACKER
To add a tracker to your app, scan the
barcode on the tracker or the tracker
box.
Or manually enter the IMEI number
which is visible under the barcode.
You will be directed to tracker set-up
page, ll in the following details to
nish setting up your tracker.
Tracker successfully added!
It will appear on the map.
To add more trackers, repeat the steps
1. Add DEVICE NAME e.g. the name of
your tracker.
2. Add your vehicle’s REGISTRATION
PLATE.
3. Add DRIVER NAME. (Optional, does not
aect any function or alerts)
4. Add DRIVER PHONE NUMBER.
(Optional, does not aect any function or alerts)
5. Choose DEVICE ICON which will be
displated on screen.
Tap to SAVE settings.

Page 8
IGNITION STATUS
CURRENT SPEED
In this example the tracker has not
moved (so is static) for 2 minutes.
LAST UPDATE
The time and date tracker info was
last updated to the server.
TRACKING
Tap to track the vehicle live
CAMERA
Feature not available for Freetrack.
SATELLITE COUNT
The more satellites visible the more
LAST GPS FIX
The time and date the server last
received an update from the tracker.
GEO FENCES
Tap to add Geo Fences.
See the Geo Fence section to learn how to
add a Geo Fence or edit a Geo Fence (Home
DETAIL
Tap to edit the details of the device
such as the tracker’s name or the
rego number of the vehicle. See
Device Detail below.
PLAYBACK TRIP
Tap to open the Playback window
(see Playback).
STATUS INFO
DEVICE DETAIL
DETAIL icon on the Status Info screen (see above).
Custom DEVICE NAME
SIM Number that’s in the TRACKER
Ignition Status
Last Position
Last Update
Current / Last Position

Page 9
PLAYBACK TRIP HISTORY ON THE MAP
Tap LIST from the Home screen
to open the device list.
Tap the up arrow to expand the
Status Info menu.
Tap PLAYBACK to open the
Playback screen.
Tap on a vehicle.
Select the DATE AND TIME RANGE
you want to view Playback for and
tap OK.
Trip history will then Playback on the
map (see the next page).
QUICK SELECT
Tap on one of
the quick select
playback periods.
CUSTOM PERIOD
OR tap on Start Time
and End Time to
choose custom date
and time ranges. Up
to 6 months history
is stored.
SELECT DEVICE
Tap Device to choose
Continued
next page ...

Page 10
TRIPS SCREEN
Tap to open the Trips screen to list trips by day.
See the next example for details.
MAP LAYERS
Switch between map or satellite views.
PLAYBACK continued ...
PLAYBACK SPEED
Tap to speed up/slow down Playback.
TRACK POINT TYPE
Switch between GPS (track points from satellite only) or
LBS track points (track points from cellphone towers) or
both (if applicable to your device).
SHOW HIDE TRACKS
Removes the trip track line from the map.
The PLAYBACK screen is now
displayed.
TIME LINE
Move the blue dot
along the line to
advance time through
the time period.
START/STOP
PLAYBACK
AVERAGE SPEED
Of the trip.
SPEED
At each track point on
the trip.
GO BACK
Tap the Go Back arrow
to return to the Status
Info menu.
Then tap Playback to
choose another trip to
view.
OR tap Go Back to return
to the device list to choose
another tracker.
OR tap Home to return to
the Home screen.
Tapping from the PLAYBACK
screen will open the TRIPS screen.
PLAY TRIP
Tap on a trip to
Playback on the map.
Tap Go Back to return to
the Trips list.
SELECT DEVICE
Tap to list trackers/
vehicles.
SELECT DATE
View a list of recent
trips or tap on a date
to list trips just for that
day.
DISTANCE TRAVELLED
In this trip.

Page 11
DEVICE NAME
IMEI NUMBER OF DEVICE
TYPE/NAME OF ALERT
Tap to display the location of the
alert on the map.
TIME/DATE OF ALERT
ALERTS / PUSH NOTIFICATIONS
Alerts are events such as alarm activations, power disconnected warning or vehicle entering a geo fence. Tapping on an alert will
show the location of the event on the map.
Alerts can be found by tapping the ALERTS icon on the Home screen or Status Info screen.
ALERT SETTINGS tap
PROFILE from the Home screen. Tap ALERT SETTINGS.
Depending on the Alert type either
a PUSH NOTIFICATION or in some
cases an SMS or PHONE CALL
still show on the Alerts screen.
A red dot will show on the Alerts
icon on the Home screen if a new
Alert has been triggered.
To set which alerts trigger a push
screen (see next example).
Alert type.
Note: if using a Prepay SIM
card additional charges may be
incurred depending on the cellular
provider and plan you have.

Page 12
CONFIGURING SMS AND PHONE CALL ALERTS
Tap COMMAND to open the To program what mobile numbers
receive SMS alerts (and for some
alerts a phone call) scroll down and
tap SOS Alarm Setting
Up to 3 mobile numbers can be
programmed to receive SMS alerts
(and for some alerts a phone call).
IMPORTANT: Program the mobile
number you want to receive phone
call alerts to SOS NUMBER 1.
This screen shows you what
mobile numbers are currently
programmed (in this example no
numbers are currently stored).
To program a mobile number tap
SOS NUMBER 1 (or 2 or 3).
Prepay SIM card additional charges may be incurred depending on which provider and plan you have).
your phone’s DO NOT DISTURB feature to allow calls from Favourites.
LIST icon on the HOME screen. Tap the up arrow to
expand the Status Info menu. Also see SOS ALARM SETTING
Enter the mobile number you
want to program. Enter numbers
without international formatting
e.g. 021499779 not [phone].
Tap SEND to send the command to
the number has been set.
Repeat for additional SOS NUMBER 2
and 3, if required.
Programming SOS mobile numbers
To DELETE a programmed number,
select the block, remove the
number.
Once the number is removed, press
SEND.
The number is now REMOVED from
the tracker.

Page 13
If your tracker is connected to an alarm
system the Alarm activation/SOS
Alarm Setting.
Note: additional charges may be incurred depending
on which SMS provider and plan you have.
Note: if you have an alarm please make sure SOS Alarm
Setting is set up otherwise you may not receive an alert
in the event of an alarm trigger.
Tap on the grey menu on the left hand side of the screen to swap between
Alert screens (in this example we are setting up an alert for Overspeed). Don’t
forget to press Send to save any changes you make.
CENTRE NUMBER
Fuel Kill by SMS. See REMOTE FUEL KILL/IMMOBILISATION for more info.
OVERSPEED ALARM
VIBRATION ALARM
POWER CUT OFF ALARM
(platform) and/or SMS and/or phone call.
LOW BATTERY ALARM
(platform) and/or SMS.
REMOTE CONTROL
Setting up alerts for other events
Setting up alarm activation alerts
IMPORTANT: Make sure the mobile number
you want to receive phone call alerts to is
programmed into SOS ALARM SETTING-
NUMBER 1
MILEAGE SETTING
Not used.
DMS SETTING
Not used.
USER-DEFINED
Not used.

Page 14
REMOTE FUEL KILL/IMMOBILISATION
If remote immobilisation has been installed on your vehicle the tracking device can remotely shut down the engine if the vehicle
is stolen. Once the fuel cut command (sent via Remote Control page or SMS) is received by the tracker it will wait until the
vehicle speed drops below 10km/h before activating the fuel kill relay.
IMPORTANT!
Immobilising a moving vehicle is dangerous and could result in injury or death. You as the operator are SOLELY
RESPONSIBLE for ensuring it is safe to immobilise your vehicle remotely. Its is STRONGLY RECOMMENDED to wait
until the vehicle is stationery before sending the fuel kill command.
The fuel kill command is for emergency use only.
The tracking device relies on the cellular network to send/receive commands. Low cellular signal may delay
activation or deactivation of the fuel kill relay.
Select CUT OFF FUEL/POWER to
immobilise the engine.
Or Select RESTORE FUEL/POWER to
allow the engine to run.
Enter your Tracksolid Pro’s app Log-in
password.
Tap SEND to send the command to the
command.
Note: if you have selected CUT OFF
FUEL/POWER the fuel kill relay will
activate once the vehicle speed drops
below 10km/h.
To be able to start the car again you
need to send the RESTORE FUEL/
POWER command.
Remote fuel kill/immobilisation via command (recommended method)
To activate remote fuel kill/immobilisation select your device from the LIST icon on the HOME screen. Tap the up arrow
to expand the Status Info menu.
Tap COMMAND . To activate FUEL KILL/
IMMOBILISATION tap Remote Control.

Page 15
TO ACTIVATE THE FUEL/ENGINE KILL RELAY:
Send RELAY,1# to your device’s SIM card phone number. Once the fuel cut SMS is received by the tracker it will wait until the
vehicle speed drops below 10km/h before activating the fuel kill relay.
TO DE-ACTIVATE THE FUEL/ENGINE KILL RELAY:
Send RELAY,0# to your device’s SIM card phone number. Once the restore SMS is received by the tracker it will de-activate the
relay and allow the engine to start.
SET UP VIA Centre Number ON COMMAND PAGE BEFORE USE.
CENTRE NUMBER
device will ignore the SMS. It is recommended you enter your phone number here and only use if the POWER CUT OFF command
below does not operate e.g. where 4G data is not available.
Enter your mobile phone number in non international format and tap SEND.
ENTER YOUR PHONE NUMBER
Enter the phone number you want
to allow SMS control of fuel kill relay.
Enter numbers without international
formatting e.g. 021499779 not
[phone]
Tap SEND to send the command to the
command.
Remote fuel kill/immobilisation via SMS
Tap COMMAND . FUEL KILL/
IMMOBILISATION VIA SMS tap
Centre Number.
Remote Fuel kill/immobilisation SMS commands
IMPORTANT!
Immobilising a moving vehicle is dangerous and could result in injury or death. You as the operator are SOLELY
RESPONSIBLE for ensuring it is safe to immobilise your vehicle remotely. Its is STRONGLY RECOMMENDED to wait
until the vehicle is stationery before sending the fuel kill command.
The fuel kill command is for emergency use only.
The tracking device relies on the cellular network to send/receive commands. Low cellular signal may delay
activation or deactivation of the fuel kill relay.
021499779

Page 16
GEO FENCE
GEO FENCE
Tap GEO FENCE to open the Tap to open the screen to set
up a NEW Geo Fence.
The Geo Fence will default to the
area around the vehicle or you can
move (and scale) the map to move
the Geo Fence to another location.
Expand the perimeter SIZE of the
Geo Fence by using the slider.
Tick ENTER
when the device enters the Geo
Fence.
Tick EXIT
when the device exits the Geo
Fence.
Tap to edit the NAME of the Geo
Fence then tap OK.
Tap SAVE to save the settings.
To Set Up a New Geo Fence
LIST icon on the HOME screen. Tap the up arrow to expand the
Status Info menu.
Note: Geofence notications are sent via app/push notications only.

Page 17
Select the Geo Fence you want to
edit.
To remove a Geo Fence tap
REMOVE .
To edit the NAME of the Geo Fence
tap .
Tap to add ADDITIONAL
DEVICES to the Geo Fence.
Tap GEO FENCE.
To Edit a Geo Fence
To edit a Geo Fence tap PROFILE
from the Home screen.

Page 18
INSTALLING THE SIM CARD
IMPORTANT! Before installing the SIM card ensure it has been activated in a mobile phone, has credit added and that it has
been added to an online account with the user’s cellular service provider (ONE NZ etc) to allow the user to check and add credit
online. See SIM CARD INTRODUCTION on page 4 for more information.
1. Open the rubber plug/cover.
2.
3. Insert the SIM with the metal face up.
The following pages are for your installer.
AVS recommends professional installation to protect your product warranty.
Please refer to the AVS website for recommended resellers or installation centers.
www.avscarsecurity.co.nz/apps/installers
ON OFF
Gold contact faces up
ON OFF
Battery back up OFF/ON SIM card slot

Page 19
WIRING DIAGRAM
85
86
30
87a
NOT USED
ALARM ACTIVATION INPUT (-)
AVS S-Series GREEN on data siren
AVS A-Series GREEN on data siren
AVS 3010 BROWN on 8 way plug
AVS C-Series BROWN on plug B
Note:
AVS recommends using a relay to ensure the tracker receives a strong earth from alarm activation
Note:
FUEL PUMP CUT
2 x GREEN
WHITE
L
O
C
K
A
C
C
O
N
S
T
A
R
T

Page 20
PIN OUT DIAGRAM
1. PW+
2. GND
3. ACC
4. RELAY (-)
5. ALARM
6. NOT USED
7. NOT USED
8. NOT USED
9. NOT USED
10. NOT USED
11. NOT USED
12. NOT USED
13. NOT USED
14. NOT USED
15. NOT USED
16. NOT USED
17. NOT USED
PIN COLOUR DESCRIPTION DEFINITION
1 RED PW+ 9V-36V CAR BATTERY POSITIVE
2 BLACK GND 9V-36V CAR BATTERY NEGATIVE
3 ORANGE ACC ACC/IGNITION INPUT (+)
4 YELLOW RELAY IMMOBILISER/FUEL KILL OUTPUT (-) TO RELAY
5 ORANGE ALARM ALARM ACTIVATION (-) INPUT
6 BLACK
7 PURPLE
8 ORANGE
9 YELLOW
10 BLACK
11 GREEN
12 BLUE
13 RED
14 BROWN
15 BLACK
16 GREY
17 BLACK
NOT USED