1) Prepare an activated SIM card (without a SIM PIN Code
enabled, and the pre‐paid SIM card is recommended).
2) Insert the SIM Card into FreeTracker unit.
3) Power ON FreeTracker, then proceed to FreeTracker set up
by sending an SMS message from a cell phone, after the
GSM function of FreeTracker is ready, the GSM LED will
blink slowly, once every three seconds.
4) The SMS message format for the set up is:
#Current_Password*CFG*New_Password*Phone_Number1*Phone_Numb
er2*Phone_Number3* Low_Battery_Setting*Time_ Zone
Setting*Device_Name#
8. How to set up FreeTracker
NOTE:Those listed authorized numbers must be cell phone numbers.
Landline numbers are not accepted.