Froggit HP1000SE User manual

HP1000SE PRO
Display
Manual (EN)
Support/updates/manuals/spare parts/compatible
products:
www.froggit.de

Display console
Note: The US port in the console of weather station is only for firmware
update, not for data communication (US cable not included).
You can use a SD card for the firmware update.(SD card not included).
Indoor sensor:
The indoor sensor will display indoor temperature, humidity and
barometric pressure alternately.
Console Display
See 6 to help you identify elements of the console’s display screen.
Display Console Screen Layout
N
o
Description N
o
Description
1 Outdoor temperature 1
3
Soil moisture(optional
sensor)
memory card slot
Power jack
R
eset
USB port

N
o
Description N
o
Description
2 Outdoor Feels
Like/Dew
point/Humidity/10Min.
Average Wind
Direction/Max Daily
Gust
1
4
Indoor humidity
3 PM2.5
concentration(optional
sensor)
1
5
RF signal bar for
multi-channel
temperature and
humidity
sensor(optional
sensor)
4 RF signal bar for
PM2.5 sensor(optional
sensor)
1
6
Multi-channel
temperature and
humidity sensor cycle
display mode
icon(optional sensor)
5 Sunrise / Sunset Time 1
7
Multi-channel
temperature and
humidity sensor
channel number
(optional sensor)
6 Wi-Fi signal bar 1
8
Rain fall
Daily/Event/Hourly/W
eekly/ Monthly/Yearly
7 Low battery power
indicator for each
sensor
1
9
Weather forecast
8 RF signal bar for
outdoor sensor array
2
0
A S/REL arometer
9 Wind direction/Wind
speed/Gust
2
1
Moon Phase
10 Indoor temperature 2
2
UV
11 Date and time 2
3
Solar Radiation
12 RF signal bar for soil
moisture
sensor(optional sensor)
Table： Display console detailed ite s

Initial Display Console Set Up
Immediately after power up (inserting power adapter), the unit will turn on
the display, and the unit will start to look for reception of the indoor and
outdoor sensor data. This may take up to 3 minutes.
Dark ackground Display
Light ackground Display
Note: Sunrise/sunset time display will only work properly when GEO
location has been set up correctly. GEO setup can be carried out under
setup menu.
Key functions
Buttons around the display
There is a set of eight keys on the bottom of the display console. The
following tables briefly explains the function of these keys.
Ico
n
Description
rightness control key
Press this key to decrease the brightness
rightness control key
Press this key to enhance the brightness

acklight on/off key
Press this key to on/off the backlight
ackground key
Press this key to choose between
background display and light background
display
Pressure display key
Press this key to choose the display between
Absolute
pressure and Relative pressure.
Channel key
Press this key to Shift the display between
indoor temp & humidity, Multiple Channel
temp& humidity and scroll automatically mode
History key
Press this key once to view Max/Min record and
twice to enter
History mode.
Setting key
Press this key to enter Setting Mode
Table: Console buttons
M
ain interface icons explain
Te perature Icon
Te perature
Range (degF)
Color
Ring
< -10
-10 to 0
0 to 10
10-20
20-30
acklight on/off key
Press this key to on/off the backlight
Press this key to choose between
dark
background display and light background
Pressure display key
Press this key to choose the display between
pressure and Relative pressure.
Press this key to Shift the display between
indoor temp & humidity, Multiple Channel
temp& humidity and scroll automatically mode
Press this key once to view Max/Min record and
History mode.
Press this key to enter Setting Mode
Table: Console buttons
ain interface icons explain
Color
Ring
Te perature
Range (degF)
Color
Ring
50-60
60-70
70-80
80-90
90-100

30-40
40-50
Hu idity Icon
Hu idity
Range (%)
Color
Ring
0%, No
signal or
dashes
1 to 10
10 to 20
20 to 30
30 to 40
40 to 50
50 to 60
Current wind direction indication
direction indication
100-110
> 110
Color
Hu idity
Range (%)
Color
Ring
50 to 60
60 to 70
70 to 80
80 to 90
90 to 99
100%
Current wind direction indication
, 10-
inute average wind
.
inute average wind

Hourly Rainfall Icon
Hourly
Rain (in)
Icon Hourly
Rain (in)
Color
Ring
0.0 0.6 to 0.8
0 to 0.2 0.8 to 1
0.2 to 0.4 1 to 1.2
0.4 to
0.6
1.2 to 1.4
Multiple Channel Selection and Scroll Mode
Multi-channel sensor is an optional sensor, not included in the package.
If you have multiple wireless sensors, while in normal mode, press the
key to toggle display in sequence of indoor, ch1, ch2….ch8, scroll
display. Please note if only CH2 is received, it will skip CH1, and toggle
only between indoor and already learned sensors.
While in Scroll display mode, the scroll icon will be displayed next to
the indoor humidity, and will scroll every 5 seconds.
Note: For multi channel sensor, only the current data of each sensor can
be viewed on the console, and no history data will be saved or uploaded
to any weather servers.
History Mode
View and Reset MAX/MIN
While in normal display, press the key once to view and reset
minimum and maximums.

Max/Min Screen
Icon Description
Selection key
Press this key to select the weather MAX/MIN
record which need to clear
Selection key
Press this key to select the weather MAX/MIN
record which need to clear
Enter key
While the desired weather MAX/MIN record
selected , press this key to popup Message
ox ”Clear the Max/Min record?”. Press
key or key to select YES or NO. Press the
key or key to confirm the selection.
Up arrow key
Press this key to change the activated option
field
Down arrow key
Press this key to change the activated option
field
History key
Press this key to select History data display.
Return key
Press this key to return to normal display
mode
History Record Mode
While in normal display, press the key twice to enter History Record
Mode.

History record Screen
Ico
n
Description
File Select key
Press this key to clear all history record
Page Select key
Press this key to enter particular page of
the history data. Each page contains
16sets data.
Scroll left key
Press this key to view the left of the
scrollable area.
Scroll right key
Press this key to view the right of the
scrollable area.
Page up key
Press this key to scroll up the page you
are viewing
Page down key
Press this key to scroll down the page
you are viewing
History key
Press this key to select the Max/Min
record or History.
Return key
Press this key to return to previous mode
Clear the history record
While in History Record Mode, press key to popup the Message ox:
“Clear the history record?” Press “Yes” to clear all history records saved
on console. Press or key to return to History record Mode.

Clear History Record Screen
View a specific page of history
While in History Record Mode, press the key to enter the page
selection mode:
view a specific page of history Screen
Press or to select a digit in a number, press or key to
change the number. Press or to change the activated option field,
toggle OK or Cancel then press or key to confirm.
View Graph
While in History Record Mode, press the key once to enter Graph
Mode.
Graph Screen

Press to shift the data display of 12/24/48/72H. Press to view the
graph of the following data:
 Indoor outdoor temperature
 Dew Point and Feels like
 Indoor outdoor humidity
 Wind speed and Gust
 Wind Direction
 UVI
 Solar radiation
 Rainfall hourly and daily
 arometer (REL & A S)
Setting Mode
While in normal display, press the key to enter Setting Mode. You
can select the below sub-mode by pressing the key
Setup Menu Screen
Ico
n
Description
Select key
Press this key to select the unit or scrolls
the value
Select key
Press this key to select the unit or scrolls
the value.
Left key
Press this key to select the set value.
Right key
Press this key to select the set value.
Up arrow key
Press this key to change the activated

option field
Down arrow key
Press this key to change the activated
option field
Set key
Press this key to select the Setting sub-
Mode
Return key
Press this key to return to previous
mode
Date and Ti e setting
While in Menu Setting Mode, press key to select Date and Time
Setup field, press or key to enter Date and Time Setup mode:
Ti e and date Setup Screen
1) Time setting (hour/minute/second)
Press key to select time setting field, and the hour digit will turn red,
press the or key to change the hour setting. Press to set the
minute, the minute digit will turn red, press the or key to change
the minute setting. Press to set the second, and the second digit will
turn red, press the or key to change the second setting
2) Date setting
Press key to select Date setting field, the day digit on focus turns red,
press the or key to change the day setting. Press to set the
month, then month digit focused will turn red, press the or key to

change the month setting. Press to set the year, the year digit on
focus will turn red, press the or key to change the year setting
3) Time zone setting
Press key to select Time zone setting field, press the or key
to change the time zone setting. Press key to select Update field,
press the or key to update the time immediately.
4) Automatically synchronize with internet time server
The time server is time.nist.gov. Press the or key to tick”
Automatically synchronize with internet time server” and press” update”
to synchronize with time server immediately. Console time will be
updated at 2:01am automatically when internet access is possible.
Ti e For at setting
Press to change the time format between hour: minute: second
(h:mm:ss), hour: minute: second AM (h:mm:ss AM) and AM hour:
minute: second (AM h:mm:ss).
Date For at setting
Press to change the time format between DD-MM–YYYY, YYYY-
MM- DD and MM-DD-YYYY
Te perature unit setting
Press to change the temperature units of measure between °F and
°C.
Baro etric unit
Press to change the temperature units of measure between
inHg, mmHg and hpa
Wind speed unit
Press to change the wind speed units of measure between mph, bft
( eaufort scale), ft/s, m/s, km/h and knot.
Rainfall unit
Press to change the rainfall units of measure between in and mm

Solar Rad. Unit
Press to change the solar radiation units of measure between
W/m^2,
lux and fc.
Multi Channel Sensor
In Multi channel sensor Setup Screen, you can rename the sensor or
register the sensor again while the sensor lost connection to console
display.
Multi channel sensor Setup Screen
Press or key to select Name setting field, the name on focus
turns green, press the or key to pop up the keyboard to enter the
sensor name. Press to scroll to the character and press
to select the character. Press to return to the setup page.
rena e the sensor Screen
Press or key to select Register setting field, press the or
key to register the selected sensor

Backlight setting
While in Menu Setting Mode, press key to select acklight Setup
field, press or key to enter backlight Setup mode:
Backlight Setting Screen
Auto atic control backlight: select this option, the backlight will auto
turn on and off according the set time
Turn on the backlight: set the time of turning on backlight
Turn off the backlight: set the time of turning off backlight
Auto atic brightness adjust ent: select this option, the brightness will
change according to the light intensity measured from outdoor sensor
Maxi u brightness: set the maximum brightness while it is the
highest light intensity
Mini u brightness: set the minimum brightness while it is the
weakest light intensity
Ic
on
Description
Select key
Press this key to select the unit or scrolls
the value
Select key
Press this key to select the unit or scrolls
the value.
Left key
Press this key to select the set value.
Right key
Press this key to select the set value.
Up arrow key
Press this key to change the activated
option field

Down arrow key
Press this key to change the activated
option field
Return key
Press this key to return to previous mode
If the auto backlight turn-on time has been set, you can press key to
turn off the backlight within the turn on time. acklight will turn on again
automatically at next turn on time. You can press any key to turn on the
backlight for 60s within the turn off time
Longitude: Latitude setting
While in Menu Setting Mode, press key to select Longitude: Latitude
Setup field, press or key to enter Longitude Latitude Setup
mode:
Longitude and Latitude Setting Screen
The sunrise/sunset times will be calculating automatically base on the
Longitude and Latitude. Your location GEO info can be found on mobile
compass page. Two digits after decimal should be enough for this
feature to be working correctly.
Baro etric display
Press to change the barometer display between REL (relative
pressure) and A S (absolute pressure)
Rainfall season (default: January)
Press to change the beginning of the rainfall yearly season month.
The default is January. Rainfall season influence the annual rainfall

maximum, minimum and total value. When one month was selected, the
annual rainfall and annual max/min rainfall were zero clearing at 0:00 of
the first day of the selected month.
Storing Interval (1-240 inutes Selectable)
Weather Server
Your console is capable of sending your sensor data to select internet-
based weather services. The supported services are shown in the table
below:
Service
Website
Description
Ecowitt
Weather
https://www.ecowitt.
net
Ecowitt
is a
new
weather server that
can host a bunch of
sensors that other
services don’t
support.
Weather
Undergro
und
https://www.wunder
ground.
com
Weather Underground
is a free weather
hosting service that
allows you to send
and view your
weather station data
real-time, view graphs
and gauges, import
text data for more
detailed analysis and
use iPhone, iPad and
Android applications
available at
Wunderground.com.
Weather Underground
is a subsidiary of The
Weather Channel and
I M.
WOW
http://wow.metoffice
.gov.
uk/
WOW is a UK based
weather observation
website.
Weather
Cloud
https://weatherclou
d.net
Weathercloud is a
real-time weather
social network formed
by observers from
around the world.
Customiz
ed
Supports uploading to
your customized

Website
website, if the website
has the same protocol
with Wunderground or
Ecowitt
Table: Supported weather services
Note: If you are testing the setup with the outdoor sensor package
nearby and indoor, you may want to consider connecting to Wi-Fi, but
not yet configuring any of the weather services. The reason is that while
indoor the temperatures and humidity recorded by the outdoor sensor,
and as reported to the weather service(s) will reflect indoor conditions,
and not outdoor conditions. Therefore, they will be incorrect.
Furthermore, the rainfall bucket may be tripped during handling, causing
rain to register while it may not actually have been raining. One way to
prevent this is to follow all instructions, except to use an incorrect
password, on purpose! Then, after final outdoor installation, come back
and change the password after clearing console history. That will start
uploading to the services with a clean slate.
Wunderground server setup
1) Get the station ID and key/password
① Visit Wunderground.com and select the Join link (1) at the top of the
page and select the Free (2) sign up option.
② Select More | Register Your PWS (3)
③ Click Send Validation E ail (4). Respond to the validation email
from Wunderground.com (it may take a few minutes).
④ Select More | Register Your PWS (5) again. This time you will be
asked details about your weather station. Go ahead and fill out the
form

After completing the weather station, you will see something like this:
Your station ID will have the form: KSSCCCC###, where K is for USA
station (I for international), SS is your state, CCCC is an abbreviation
for your city and ### is the station number in that city. In the example
above, you see station 424 in the state of Arizona (AZ) in the United
States (K).
⑤ Take note of the station ID and key/password and enter it in the
Weather Server:
Registration on console display
Press or key to enter Weather Server set up mode. The device
can be configured to send real-time data to wunderground.com®. Enter
the Station ID and Password obtained from Wunderground.com.
WU Server setup screen

scroll
value
up
scroll
value
down
Scroll
field up
Scroll
field
down
return to
Setup
Set Station ID: Press to highlight the Station ID. Enter your station
ID. Press to display the keyboard. Press to scroll to
the character and press to select the character. Press to return to
the setup page.
Set Station Key: Press to highlight the station key. Enter your
password obtained from according weather server. Press to display
the keyboard. Press to scroll to the character and press
to select the character. Press to return to the setup page.
3)Viewing data on wunderground.co
The most basic way to observe your weather station’s data is by using
the wunderground.com web site. You will use a URL like this one, where
your station ID replaces the text “STATIONID”:
http://www.wunderground.com/personal-weather-
station/dashboard?ID=STATIONID
It will show a page such as this, where you can look at today’s data and
historical data as well: