10 Visit Frontier.com for more information
To control live TV:
1. Press PAUSE on the set-top box remote control to pause the
program for up to 60 minutes. The image freezes. A progress
bar shows the following:
• The time at which you paused (shown as a vertical line with
the time above it).
• How much time has elapsed since you paused the program
(shown as the shaded area after pause time).
If you pause longer than the maximum amount of time allowed,
the program automatically begins playing again from the point
at which you paused it.
2. Press PLAY on the remote control to resume playing the
program from the point at which you paused it. You can also
do the following:
• Press FF on the remote control to fast-forward continuously
or press SKIP to jump forward in short segments up to the
point at which the program is playing in real-time. Press
FF once, twice, three times or four times to fast-forward at
increasing speeds.
• Press REW to rewind continuously or press REPLAY to
jump backward in short segments. Press REW once, twice,
three times or four times to rewind at increasing speeds.
The Progress Bar for Live TV
The progress bar for live TV shows the following:
• The point you are watching in the recorded portion of the
program, indicated by a vertical line with the time above it.
• How far you can rewind or fast-forward, indicated by the
shaded areas before and after the point in the program that
you are currently watching.
• The point at which you would be watching live TV, indicated by
the end of the forward shading.
The progress bar disappears after a few seconds. You can
display the progress bar at any time by pressing PLAY or OK
on your remote control.
