FujiFilm FinePix F30 User manual

BL00538-200(1) E
Camera Controls
F30
Shutter button
Mode dial
Lens (lens cover)
POWER button Flash
AF-assist illuminator
Self-timer lamp
Terminal cover
A/V OUT (Audio/
Visual output) socket
USB socket
DC IN 5V socket
Microphone
Indicator lamp
4-direction
(nopq) button
LCD monitor
Speaker
Tripod mount
W (Wide zoom) button
T (Tele zoom) button
w (Playback) button
Photo mode (p) button
Strap mount
MENU/OK button
D Exposure compensation
button
DISP (Display)/BACK button
Battery cover
xD-Picture Card slot
Battery compartment
Battery release catch
FPT/Y-608103-PW
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Battery release catch
Indicators
A. Loading the Battery
Hold the battery so that the indicators are aligned. Push the battery
release catch aside while loading the battery. Check that the battery is
firmly held in place.
C. Setting up the Camera
B. Charging the Battery
Plug the AC power adapter connector into the DC IN 5V
socket on the camera.
Plug the connecting cable
into the AC power adapter.
Plug the connecting
cable into the power
outlet.
When connecting is completed, battery charging begins.
Charging ends when the indicator lamp turns off (about 4 hours).
Press POWER down fully to turn the
camera on.
1.
screen appears on the LCD
monitor.
2.
SET NO
START MENU
/ LANG.
Press n, o, p, or q to select the
language.
Press MENU/OK to confirm the setting.
3.
4.
D. Taking Pictures
Still images that can be viewed on FinePix F30
You can use this camera to view still images recorded on FinePix F30
or still images (excluding some uncompressed images) recorded on a
FUJIFILM digital camera that supports xD-Picture Card.
Press POWER down fully to turn the
camera on.
Press the shutter button down halfway to
adjust the focus.
You can select your preferred date
format.
Press the shutter button down fully to
take a picture. The camera makes a
“Click” sound and takes the picture.
FinePix F30 has internal memory that can store images without
xD-Picture Card. Use an xD-Picture Card (sold separately) when
recording a large number of images.
Press p or q to select Year, Month,
Day, Hour, or Minute. Press n or o to
correct the setting.
✽ Refer to the Owner’s Manual for
“Turning On and Off”.
5.
1.
3.
4.
Halfway pressed
Fully pressed
SET NO
DATE / TIME NOT SET
YY.MM.DD 1. 1 12:00
AM
E. Viewing the Images
Press w.
Press p or q to move through your
images.
2.
1.
Double
beep
Click
6.
Set the Mode dial to q.
2.
1.
2.
3.
4.

Viewing Images on your PC
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or “Software
Installation” in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
( http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to “Software Installation” in the Owner’s
Manual.
A. Installing Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn on your PC and start up Windows.
●
! Users of Windows 2000 Professional or Windows XP
should log in by using a system administrator account (e.g.
“Administrator”).
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into
the CD-ROM drive. The installer
starts up automatically.
4. The Setup screen appears.
Click the [Installing
FinePixViewer] button.
5. After installation completed, press [Close] button.
B. Connecting the Camera to your PC
1. Insert the xD-Picture Card with images into the camera.
2. Connect the camera to your PC using the USB cable
(included).
C. Saving the Images
1. The Save Image Wizard starts up. Click the [Start] button.
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2006_0524
2. Select “Preview” in the View menu to display an enlarged image.
D. Viewing the Images
1. Click the [Show List of Images] button.
Windows XP
The “Found New Hardware” help message appears in the
bottom-right corner of your screen. This message will close
when the settings are completed. No action is required.
FinePixViewer starts up automatically.
A.Installing Software
A.Installing Software
B.Connecting the Camera to your PC
B.Connecting the Camera to your PC
C.Saving the Images
C.Saving the Images
AC-5VC
;
USB socket
3. Press w for about 1 second to turn the camera on in
Playback mode.
4.
Windows 98/98 SE/Me/2000 Professional
FinePixViewer starts up automatically.