FujiFilm X-T30 Owner's manual

New Features Guide
Version 1.20
Features added or changed as a result of rmware updates may no
longer match the descriptions in the documentation supplied with
this product. Visit our website for information on the updates avail-
able for dierent products:
https://fujifilm-x.com/support/download/firmware/
BL00005083-200 EN

Contents
X-T30 rmware version 1.20 adds or updates the features
listed below. For information on earlier versions, visit the
following website.
http://fujifilm-dsc.com/en/manual/
No. Description X-T30
P
See
PVer.
1
1The Q(quick menu) button can now be used as an
Fn (function) button.
204, 225,
228, 230 1, 2, 4 1.10
2
2
Movie recording can now be controlled from external
devices, and the DCONNECTION SETTING> PC
CONNECTION MODE item in the setup menu has
consequently been renamed CONNECTION MODE.
218 5 1.20

1
Changes and Additions
Changes and additions are as follows.
X-T30 Owner’s Manual: P225 Ver. 1.10
The Q (Quick Menu) Button
Press Qfor quick access to selected options.
N
• Use DBUTTON/DIAL SETTING > FUNCTION (Fn) SETTING to
choose the function performed by the Q(quick menu) button or as-
sign its default function to other controls.
• To disable the Q(quick menu) button, select NONE for DBUTTON/
DIAL SETTING > FUNCTION (Fn) SETTING > Q BUTTON SETTING.
The Quick Menu Display
At default settings, the quick menu contains the following items:
BASE
400
SELECT CUSTOM SETTING
ENDSET
A
SELECT CUSTOM SETTING
B
ISO
C
DYNAMIC RANGE
D
WHITE BALANCE
E
NOISE REDUCTION
F
IMAGE SIZE
G
IMAGE QUALITY
H
FILM SIMULATION
I
HIGHLIGHT TONE
J
SHADOW TONE
K
COLOR
L
SHARPNESS
M
SELF-TIMER
N
AF MODE
O
FLASH FUNCTION SETTING
P
EVF/LCD BRIGHTNESS

2
X-T30 Owner’s Manual: P228 Ver. 1.10
The Fn (Function) Buttons
Assign a role to the function buttons for quick access to the
selected feature.
N
• The functions assigned to T-Fn1 through T-Fn4 can be accessed by
icking the monitor.
• Touch-function gestures are disabled by default. To enable
touch-function gestures, select ON for DBUTTON/DIAL SETTING>
TOUCH SCREEN SETTING> cTOUCH FUNCTION.
The default assignments are:
Fn1 button
Fn1 button
Performance
AE-L button
AE-L button
AE lock only
Q button
Q button
Quick menu
AF-L button
AF-L button
AF lock only

3
T-Fn1 (ick up)
T-Fn1 (ick up)
Drive setting
T-Fn2 (ick left)
T-Fn2 (ick left)
Film simulation
T-Fn3 (ick right)
T-Fn3 (ick right)
White balance
T-Fn4 (ick down)
T-Fn4 (ick down)
AF mode
Center of rear command dial
Center of rear command dial
Focus check

4
X-T30 Owner’s Manual: P204, 230 Ver. 1.10
FUNCTION (Fn) SETTING
Assigning Roles to the Function Buttons
3 Highlight the desired role and press MENU/OK to assign it to
the selected control. Choose from:
• IMAGE SIZE
• IMAGE QUALITY
• RAW
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME EFFECT
• DYNAMIC RANGE
• D RANGE PRIORITY
• WHITE BALANCE
• SELECT CUSTOM SETTING
• FOCUS AREA
• FOCUS CHECK
• AF MODE
• AF-C CUSTOM SETTINGS
• nFACE SELECT op
• FACE DETECTION ON/OFF
• DRIVE SETTING
• SPORTS FINDER MODE
• PRE-SHOT sJ
• SELF-TIMER
• PHOTOMETRY
• SHUTTER TYPE
• FLICKER REDUCTION
• ISO
• IS MODE
• WIRELESS COMMUNICATION
• FLASH FUNCTION SETTING
• TTL-LOCK
• MODELING FLASH
• FULL HD HIGH SPEED REC
• ZEBRA SETTING
• INTERNAL/EXTERNAL MIC LEVEL
ADJUSTMENT
• MOVIE SILENT CONTROL
• PREVIEW DEPTH OF FIELD
• PREVIEW EXP./WB IN MANUAL MODE
• NATURAL LIVE VIEW
• HISTOGRAM
• ELECTRONIC LEVEL
• LARGE INDICATORS MODE
• AE LOCK ONLY
• AF LOCK ONLY
• AE/AF LOCK
• AF-ON
• AWB LOCK ONLY
• APERTURE SETTING
• PERFORMANCE
• AUTO IMAGE TRANSFER
• SELECT PAIRING DESTINATION
• Bluetooth ON/OFF
• PLAYBACK
• QUICK MENU
• NONE (control disabled)

5
X-T30 Owner’s Manual: P218 Ver. 1.20
CONNECTION MODE
Adjust settings for connection to external devices.
Option
Option
Description
Description
USB CARD READER
Connecting the camera to a computer via USB automatical-
ly enables data transfer mode, allowing data to be copied
to the computer. The camera functions normally when not
connected.
USB MOVIE
SHOOTING AUTO *
The camera’s movie-recording features can be controlled
from gimbals, drones, or other devices connected via USB.
The camera automatically enters“tethered shooting” (i.e., re-
mote-control) mode when the external device is turned on
and returns to normal operation when the external device
turned off or disconnected. The features available vary with
the type of device connected.
USB MOVIE
SHOOTING FIXED *
As for USB MOVIE SHOOTING AUTO, except that the
camera remains in “tethered shooting” (remote-control)
mode when the external device is off or not connected, al-
lowing the device to resume control when the connection
is re-established after an accidental disconnection or other
disruption.
USB RAW CONV./
BACKUP RESTORE
Connecting the camera to a computer via USB automatical-
ly enables USB RAW conversion/backup restore mode. The
camera functions normally when not connected.
• USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the
camera’s image processing engine to rapidly convert RAW
files to high-quality JPEG images.
• BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load
camera settings. Reconfigure the camera in an instant or
share settings with other cameras of the same type.
* Rotate the drive dial to F(movie).
O
DPOWER MANAGEMENT> AUTO POWER OFF settings also apply
when the camera is connected to an external device. To prevent the
camera turning o automatically, select OFF for AUTO POWER OFF.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
https://fujifilm-x.com