the panel as shown in the fig. If light flashes faster than normal or no flashing,
maybe one of the signal lamps is faulty while other drivers can’t see your
turning signal.
Notice：
：：
：
If the turning light is faulty, please check up and get it repaired in time in
case any accident occurs.
3、Main-beam headlamp/dipped head lamp:
For change from dimmed light to main-beam headlamp or the dimmed to
the main-beam, turn the switch on the lever to the illumination position and
then up or down push the lever. On the main-beam headlamp
position, the indication lights are shown as in fig.
4、Overtaking signal light:
While headlight turns off, as up-pushing the lever the main-beam
headlamp shines shortly (signalizing an overtaken), as free the lever, the
overtaking light turns off.
5、Windshield wiper:
The windshield wiper has two gears for wiping. You can move the wiper
handle bar forth and back to adjust the working speed.
The wiper pushed backward to “LO” position
for a stable low-working-speed；“HI” for a high-
working–speed , “OFF” for stopping it.
Notice
The damaged windscreen wiper obstructs line of sight against driving
safety. To avoid this damage you should ensure clearing up icy-snow in
advance. (On local weather condition, if there is snow iced on the windshield
that should be melt-moved. if the wiper flake is damaged, replace it.)
Thick snow-ice will make the wiper overload and cause motor or fuse
burned. Clear up the snow ice in time.
6、Windshield cleaner(optional)
As cleaning the windshield, pull out the wiper’s control, simultaneously
upward to start the cleaner and the wiper. Pull back the control, the cleaner
stops. Warning
If frost temperature locally, use the cleaner as the
windshield gets warm in case the cleaning liquids gets
9
