Fun Generation PL 108 P User manual

PL 108 P / 110 P / 112 P
passive 2 way speaker
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
19.09.2016, ID: 383468_383471_383472

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 10
4 Installation.................................................................................................................................................. 11
4.1 Tips on handling speakers............................................................................................................ 13
4.2 Connections....................................................................................................................................... 14
5 Technical specifications....................................................................................................................... 17
6 Plug and connection assignment.................................................................................................... 20
7 Cleaning....................................................................................................................................................... 21
8 Protecting the environment.............................................................................................................. 22
Table of contents
PL 108 P / 110 P / 112 P
3

1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
passive 2 way speaker
4

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
PL 108 P / 110 P / 112 P
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
passive 2 way speaker
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
PL 108 P / 110 P / 112 P
7

2 Safety instructions
This device is intended to be used in a sound reinforcement system. Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety instructions
passive 2 way speaker
8

CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use suffi‐
cient ear protectors.
Safety instructions
PL 108 P / 110 P / 112 P
9

3 Features
npassive 2-way speaker
nmaximum load capacity 320 W, 480 W or 600 W (depending on the model)
n8", 10" or 12" woofer (depending on the model)
n1" tweeter
n2 × lockable NL4 chassis connectors (IN/OUT)
nsolid plastic housing with pole mount and handles
Features
passive 2 way speaker
10

4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
NOTICE!
Possible property damage by magnetic fields
Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate
distance to devices that can be adversely affected or damaged by an external
magnetic field.
Installation
PL 108 P / 110 P / 112 P
11

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
passive 2 way speaker
12

4.1 Tips on handling speakers
We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐
ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound
will be evenly spread with maximum range throughout the audience area.
Always use high grade cable to connect your equipment. Otherwise you won't reach max‐
imum sound quality.
For optimum results both impedance and power handling of the speakers must match the
requirements of the amplifier. Always follow the technical specifications of the speakers! The
overall impedance of the connected loudspeakers must not deceed the minimum output
impedance of the amp. The amps max. RMS output power should be 50 % above the power
handling capacity of the connected speakers.
If you notice distortion during operation, either the amp or the speaker is overloaded. This may
permanently damage the amp or the speaker. Always reduce the volume when you hear dis‐
tortion.
Installation
PL 108 P / 110 P / 112 P
13

4.2 Connections
Model PL 108 P
Installation
passive 2 way speaker
14

Model PL 110 P
Installation
PL 108 P / 110 P / 112 P
15

1[INPUT]
Lockable NL4 chassis connector for signal input (1+/1–).
2[OUTPUT]
Lockable NL4 chassis connector output for connecting an additional passive
speaker box (1+/1–).
Model PL 112 P
Installation
passive 2 way speaker
16

5 Technical specifications
System Passive 2-way speaker
Configuration 1 × 8" woofer, 1 × 1" tweeter
Connections 2 × NL4 (IN/OUT)
Power handling 320 W (peak)
Impedance 8 Ω
Sound pressure level (max.) 107 dB
Frequency range 90 Hz - 18 kHz
Dimensions (W × H × D) 438 mm × 295 mm × 245 mm
Weight 3.8 kg
PL 108 P
Technical specifications
PL 108 P / 110 P / 112 P
17

System Passive 2-way speaker
Configuration 1 × 10" woofer, 1 × 1" tweeter
Connections 2 × NL4 (IN/OUT)
Power handling 480 W (peak)
Impedance 8 Ω
Sound pressure level (max.) 109 dB
Frequency range 80 Hz - 18 kHz
Dimensions (W × H × D) 545 mm × 360 mm × 295 mm
Weight 5.6 kg
PL 110 P
Technical specifications
passive 2 way speaker
18

System Passive 2-way speaker
Configuration 1 × 12" woofer, 1 × 1" tweeter
Connections 2 × NL4 (IN/OUT)
Power handling 600 W (peak)
Impedance 8 Ω
Sound pressure level (max.) 114 dB
Frequency range 80 Hz - 19 kHz
Dimensions (W × H × D) 630 mm × 420 mm × 342 mm
Weight 9.8 kg
PL 112 P
Technical specifications
PL 108 P / 110 P / 112 P
19

6 Plug and connection assignment
This chapter will help you select the right cables and plugs to connect your valuable equip‐
ment in such a way that a perfect sound experience is ensured.
Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a
plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short
circuit or ‘just’ in poor transmission quality!
1, + Signal 1 (in phase)
1, – Signal 1 (180 degree phase shift)
2, + Signal 2 (in phase)
2, – Signal 2 (180 degree phase shift)
Introduction
NL4 mounting connectors
Plug and connection assignment
passive 2 way speaker
20