Funai Dbvr-7510 User manual

Printed in China

Table of Contents

Precautions .......................................................................... 2

Laser Safety........................................................................ 2

Important............................................................................. 2

Power Supply..................................................................... 2

Dew Warning ...................................................................... 2

Caution................................................................................ 2

Positioning .......................................................................... 2

A Note About Recycling ...................................................... 2

Connection to Power............................................................3

Playable Discs .....................................................................4

Unplayable Discs ................................................................ 4

Important Copyright Information ......................................... 4

Symbols Used in this Manual.............................................. 4

Functional Overview ........................................................... 5

Front Panel ......................................................................... 5

Remote Control................................................................... 6

Loading Batteries................................................................ 6

DVD/VCR Switching ........................................................... 6

Rear View ........................................................................... 7

Setting up Your DVD/VCR.................................................. 7

Before Connecting .............................................................. 7

Connecting to a TV ............................................................. 7

For Better Sound (for DVD Features) ................................. 8

External Input Mode (for VCR Features) ............................ 9

Video Cassette Tape .......................................................... 9

TV Colour System............................................................... 9

Setting the Clock................................................................. 9

Channel Presetting ............................................................. 9

Automatic Channel Preset .................................................. 9

Manual Channel Preset .................................................... 10

To Skip a Preset Channel................................................. 10

Channel Reprogramming.................................................. 10

VCR Operation ................................................................... 11

VCR Features ................................................................... 11

Playback ........................................................................... 11

Auto Repeat Playback ...................................................... 11

Picture Select.................................................................... 12

Auto Return....................................................................... 12

Quick-Find......................................................................... 12

Index Search..................................................................... 12

Time Search...................................................................... 13

Recording.......................................................................... 13

OTR (One Touch Recording).............................................13

Timer Recording ................................................................13

Hints for OTR and Timer Recording ..................................14

Copying a Video Tape .......................................................15

Status Display ................................................................... 15

Real Time Tape Counter................................................... 15

Automatic Operations........................................................ 15

DVD Operation ................................................................... 16

Basic Playback.................................................................. 16

General Features .............................................................. 16

Disc Menus ....................................................................... 16

Title Menu ......................................................................... 16

Calling up a Menu Screen During Playback...................... 16

MP3 / JPEG Playback ..................................................... 17

Dual Playback ................................................................ 17

Slide Show Mode .............................................................. 17

Adjustment of Picture Size ................................................ 18

Resume............................................................................. 18

Pause ................................................................................ 18

Step by Step Playback ...................................................... 18

x1.3 and x0.8 Rapid Play with Voice................................. 18

Fast Forward / Reverse Search ........................................ 18

Slow Forward / Reverse Search ....................................... 18

Zoom ................................................................................. 19

Audio Language ................................................................ 19

Subtitle Language ............................................................. 19

Camera Angle ................................................................... 19

Stereo Sound Mode .......................................................... 19

Virtual Surround ................................................................ 19

Track Search..................................................................... 20

Chapter / Title Search ....................................................... 20

Time Search...................................................................... 20

Marker Setup..................................................................... 20

Repeat............................................................................... 21

Programmed Playback...................................................... 21

Random Playback ............................................................. 21

Folder Playback ................................................................ 22

On-Screen Information...................................................... 22

DVD Setup ......................................................................... 23

Language Setting .............................................................. 23

Display Setting .................................................................. 23

Audio Setting..................................................................... 24

Parental Control ................................................................ 24

Others Setting ................................................................... 24

To Reset All the Settings of the Setup Screen.................. 25

Language Code .................................................................. 25

Troubleshooting Guide ..................................................... 26

Specifications .................................................................... 27

Maintenance ....................................................................... 27

Declaration of Conformity.................................. Back cover

Supplied Accessories

• Remote control

• Two R6 (AA) batteries

•RFcable

• Scart cable

•Owner’sManual

• Quick Setup Guide

Model/Serial Number

This appliance has a serial number located on the rear panel.

Please note down the serial number and retain the information

for your records.

Model number: DBVR-7510

Serial number:

DVD/CD PLAYER &

VIDEO CASSETTE RECORDER

DBVR-7510

Owner’s Manual

PAL

E8BK1BD(EN).fm Page 1 Tuesday, April 4, 2006 6:29 PM

2EN

Precautions

Laser Safety

This unit employs a laser. Only a qualified service person

should remove the cover or attempt to service this device, due

to possible eye injury.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE.

CAUTION:

VISIBLE LASER RADIATION WHEN OPEN

AND INTERLOCK DEFEATED. AVOID

EXPOSURE TO BEAM.

LOCATION:

• PRINTED ON THE BACK

Important

• Use only discs marked DVD or disc with this DVD.

• Use only cassettes with the VHS mark with this VCR.

Power Supply

The power supply is engaged when the mains plug is plugged

in a 220-240 V , 50 Hz AC outlet. To operate the unit, press

STANDBY-ON to turn on the unit.

WARNING: LIVE PARTS INSIDE.

DO NOT REMOVE ANY SCREWS.

Dew Warning

Moisture condensation may occur inside the unit when it is

moved from a cold place to a warm place, or after heating a

cold room or under conditions of high humidity. Do not use

the unit at least for 2 hours until its inside is dry.

Caution

1) Do not attempt to open the cabinet. There are no parts

you can service inside. Refer all servicing to qualified

service personnel.

2) Slots and openings in the cabinet and the sides or bottom

are provided for ventilation. To ensure reliable operation

and to protect the unit from overheating, these openings

must not be blocked or covered.

Avoid installation in enclosed spaces such as bookcases

unless proper ventilation is provided.

3) Keep the unit away from radiators and other heat sources.

4) Avoid use near strong magnetic fields.

5) Do not push objects of any kind into the unit through the

cabinet slots or openings as they could touch electrically

live parts or short circuit parts resulting in a fire or electric

shock.

6) Never spill liquid on this unit. If liquid is spilled and

penetrates into the unit, consult qualified service

personnel.

7) Do not stand the unit up vertically. Use this unit in a

horizontal (flat) position only.

8) Before attempting to operate the unit, make sure that the

Timer Recording mode is “OFF”.

9) This product is in Stand-by mode when it turns off while

the power cord is connected.

10)Do not place any combustible objects on the device

(candles, etc.).

11)Be sure to remove a disc and unplug the mains cord from

the outlet before carrying the unit.

12)Disconnect the mains plug to shut off when find trouble

or not in use.

13)The mains plug shall remain readily operable.

14)Read both manual instructions to ensure correct and safe

installation and interconnection of the unit in multimedia

systems.

15)Keep the distances 20 cm around apparatus of ventilation

openings.

Positioning

Do not place the unit directly on top of, or underneath, your

TV set. Ensure that there is at least 20 cm between the unit and

the TV set, and that air can circulate freely through the

ventilation openings of the unit.

A Note About Recycling

This product’s packaging materials are recyclable and can be

reused. Please dispose of any materials in accordance with your

local recycling regulations.

This product consists of materials which can

be recycled and reused if disassembled by a

specialised company.

Batteries should never be thrown away or

incinerated but disposed of in accordance

with your local regulations concerning

chemical wastes.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

KLASS 1 LASER APPARAT

CLASSE 1 PRODUIT LASER

E8BK1BD(EN).fm Page 2 Tuesday, April 4, 2006 6:29 PM

3EN

Connection to Power

Before Switching on make sure that the voltage of your

electricity supply is the same as that indicated on the rating

plate.

Mains Cord

This appliance may be fitted with a non-rewireable plug. If it

is necessary to change the fuse in a non-rewireable plug the fuse

cover must be refitted. If the fuse cover is lost or damaged, the

plug must not be used until a replacement available from the

appliance manufacturer is obtained.

It is important that the colour of the replacement fuse cover

corresponds with the rating marking on the base of the plug.

If the plug has to be changed because it is not suitable for your

socket, or becomes damaged, it should be cut off and an

appropriate plug fitted following the wiring instructions

below. The plug removed must be disposed of safely as

insertion into a 13A socket is likely to cause an electrical

hazard. For your own safety read the following instructions

carefully before attempting to connect this unit to mains.

The wires in this mains lead are coloured in accordance with

the following code:

BLUE=NEUTRAL, BROWN=LIVE

Important

As the colours of the wires in the mains lead of this appliance

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:-

The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red.

No connection is to be made to the earth terminal of the plug.

If a 13 Amp (BS 1363) Plug is used, a 3 Amp Fuse must be

fitted, or if any other type of Plug is used a 3 or 5 Amp Fuse

must be fitted, either in the Plug or Adaptor, or on the

Distribution Board.

Mains Supply: 220 - 240 V 50 Hz - AC only

Do not make any connection to the larger pin marked with the

letter “E” or by the symbol or coloured green or green and

yellow.

FUSE

BLUE

(Neutral)

BROWN

(Live)

CORD GRIP

OUTER SHEATH OF THE WIRE

E8BK1BD(EN).fm Page 3 Tuesday, April 4, 2006 6:29 PM

4EN

Playable Discs

The following discs can be played back on this unit.

Note:

*1: This unit conforms to the PAL colour system. Also you

can play discs recorded with the NTSC system via a PAL

system TV set.

*2: The region code 2 or ALL are marked on DVDs as

follows.

*3: Certain DVD-Video discs do not operate as described in

this manual due to the intentions of the disc’s producers.

*4: Only the discs recorded in the video format and finalised

can be played back. Discs unfinalised cannot be played

back.

Depending on the recording status of a disc, the disc may

not be played back at all or normally (the picture or sound

may not be smooth, etc.).

*5: Scratched or stained discs may not be played back.

*6: Some discs cannot be played back because of incompatible

recording conditions, characteristics of the recorder or

special properties of discs.

*7: You can play back discs which bear marks above. If you

use nonstandardized discs, this unit may not play them

back. Even if they are played back, the sound or video

quality will be compromised.

*8: If the disc’s recording space is small (Disc size is shorter

than 55mm across), it may not be played back.

*9: Do not glue paper or put stickers onto the disc. These may

damage the disc, and the unit may not read it correctly.

Unplayable Discs

•NEVER play back the following discs.

Otherwise, malfunction may result!

DVD-RAM

CD-i

Photo CD

DVD with region codes other than 2 or ALL

DVD-ROM for personal computers

CD-ROM for personal computers

•On the following disc, the sound MAY NOT

be heard.

Super Audio CD

DVD-Audio

Note: • Only the sound recorded on the normal CD layer can

be delivered.

The sound recorded on the high density Super Audio

CD layer cannot be delivered.

• Any other discs without compatibility indications.

Important Copyright Information

DVD:

Unauthorized copying, broadcasting, public performance and

lending of discs are prohibited.

This product incorporates copyright protection technology

that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology

must be authorized by Macrovision, and is intended for home

and other limited viewing uses only unless otherwise

authorized by Macrovision. Reverse engineering or

disassembly is prohibited.

VCR:

Unauthorised recording or use of broadcast television

programming, video tape, film or other copyrighted material

may violate applicable copyright laws. We do not take

responsibility for the unauthorised duplication, use, or other

acts which infringe upon the rights of copyright owners.

Symbols Used in this Manual

The following symbols appear below in some headings and

notes in this manual, with the following meanings:

: Description refers to playback of DVD-Video discs.

: Description refers to playback of Audio CDs.

: Description refers to playback of CD-R/RW discs with

MP3 files.

:Description refers to viewing of CD-R/RW discs with

JPEG files.

is a trademark of DVD Format/Logo

Licensing Corporation.

“Kodak Picture CD COMPATIBLE” is trademark

of Eastman Kodak Company.

DVD-V

MP3

JPEG

E8BK1BD(EN).fm Page 4 Tuesday, April 4, 2006 6:29 PM

5EN

Functional Overview

Front Panel

1. ySTANDBY-ON indicator

The indicator is on when this unit is turned on.

2. ySTANDBY-ON

To turn the unit ON or OFF.

3. Cassette Compartment

4. OPEN/CLOSE (DVD)

To open or close the disc tray.

5. VCR OUTPUT indicator (Green)

The indicator is on when this unit is in the VCR mode.

Make sure that this indicator is on before VCR

operation.

6. OUTPUT

To select the DVD mode or VCR mode.

7. DVD OUTPUT indicator (Green)

The indicator is on when this unit is in the DVD mode.

Make sure that this indicator is on before using the DVD

player.

8. DISC IN indicator

Lights up when a disc is inserted.

9. PLAY indicator

Lights up when the inserted disc is being played back.

Blinks when an unacceptable disc is inserted.

10. Disc tray

11. SKIP/FWD G(DVD)

To go to the next chapter or track during playback.

Press and hold this button for 1.5 seconds or more to

search forward through the disc.

12. PLAY B(DVD)

To begin disc playback.

13. STOP C (DVD)

To stop playback.

14. REV/SKIP H(DVD)

To go to the previous chapters or tracks during playback.

Press and hold this button for 1.5 seconds or more to

search backward through the disc.

15. CHANNEL (VCR)

To change TV channels.

To adjust the tracking manually during playback.

16. Remote Sensor

17. TIMER indicator

Lights up when the Timer Recording or an OTR

recording has been set.

18. REC/OTR (VCR)

Press once to start recording or repeatedly to start One-

To u c h R e co r d i n g .

19. REC indicator

Lights up during a recording. Flashes when a recording is

paused.

20. PLAY B (VCR)

To begin tape playback.

21. STOP/EJECT (VCR)

To stop playback.

To eject the tape in the Stop mode.

22. F.FW D g(VCR)

To fast forward the tape.

23. REW h (VCR)

To rewind the tape.

24. AUDIO in jack

Connect an audio cable coming from the audio out jack

of a camcorder, another VCR, or an audio source here.

25. VIDEO in jack

Connect a video cable coming from the video out jack of

a camcorder, another VCR, or an audio-visual source

(laser disc player, video disc player, etc.) here.

OPEN/

STANDBY-ON

REW F.FWD STOP/EJECT PLAY REC/OTR

CHANNEL

VIDEO

AUDIO

OUTPUT STOP PLAYREV/SKIP SKIP/FWD

REC TIMER

VCR DVD DISC IN PLAY

1819 161722 202123

121314

25 24

1 2 3 54 8 9

E8BK1BD(EN).fm Page 5 Tuesday, April 4, 2006 6:29 PM

6EN

Remote Control

1. SPEED/SYSTEM (VCR)

To c ha n ge t h e r ec o rd i n g sp e e d .

(Only the function of SPEED is available for this unit.)

2. STANDBY-ON

To turn the unit ON or OFF.

3. 0-9 Number buttons

To select numbered items on the menu screen. (DVD)

To select chapters, titles or tracks directly. (DVD)

To select a channel. (VCR)

+10 (DVD)

To enter 10 and over.

4. DISPLAY

To display the current playback mode. (DVD)

To display the current time, tape counter and channel number.

(VCR)

5. VCR

Press this button before using the remote control for VCR

features.

6. h

To search backward through the disc. (DVD)

To rewind the tape. (VCR)

7. STOP C

To stop playback. (DVD)

To stop playback or recording. (VCR)

8. REC/OTR (VCR)

Press once to start recording or repeatedly to start One-Touch

Recording.

9. MENU

To call up the menu on a DVD. (DVD)

To call up the FILE LIST. (DVD)

To call up the VCR menu. (VCR)

10. TOP MENU (DVD)

To call up the title menu on a DVD.

To return to the top file of the highest hierarchy in the

PROGRAM and the FILE LIST.

11. SETUP (DVD)

To access or remove the DVD setup menu.

12. ZOOM (DVD)

To magnify the part of picture.

13. MODE (DVD)

To set up Programmed or Random Playback for Audio CDs,

MP3 and JPEG files.

To set the Virtual Surround ON or OFF.

To activate the Virtual Surround or x1.3 and x0.8 Rapid Play

with Voice.

14. SUBTITLE (DVD)

To change subtitles on a DVD.

T-SET (VCR)

To put the VCR into Standby mode for a Timer Recording.

15. ANGLE (DVD)

To change camera angles on a DVD.

To rotate a picture of JPEG files.

16. REPEAT (DVD)

To play the selected chapter, title, track, group or a whole disc

repeatedly.

17. A-B (DVD)

To repeat between your chosen point A and B.

18. SEARCH MODE

To search chapters, titles, tracks, markers or time. (DVD)

To call up the index or time search menu. (VCR)

19. QUICK-FIND (VCR)

To skip to the beginning of next programme.

20. RETURN (DVD)

To return to the previous operation in the menu.

21. Cursor K/L/s /B

To mo ve t he c u r so r.

22. ENTER (DVD)

To confirm your menu selections.

23. g

To search forward through the disc. (DVD)

To fast forward the tape. (VCR)

24. PLAY B

To begin playback.

25. DVD

Press this button before using the remote control for DVD

features.

26. PAUSE F

To p a u s e p l a y b a c k . ( D V D )

To advance playback one frame at a time. (DVD)

To pause playback or recording. (VCR)

To advance playback one frame at a time. (VCR)

27. SLOW (VCR)

To view the tape in slow motion.

28. CLEAR (DVD)

To clear the markers.

To clear the incorrect input.

To cancel the point for A-B repeat on a DVD and a CD.

C.RESET (VCR)

To reset the tape counter.

29. SKIP H G(DVD)

To skip chapters or tracks.

CH. K/L (VCR)

To change TV channels.

To adjust the tracking manually during playback.

30. OPEN/CLOSE (DVD)

To open or close the disc tray.

EJECT (VCR)

To eject the tape from the VCR.

31. AUDIO (DVD)

To change audio languages on a DVD.

To change sound modes of a CD.

Loading Batteries

1) Open the battery compartment cover.

2) Insert two R6 (AA) batteries, with each one

oriented correctly.

3) Close the cover.

Note: • Do not mix alkaline and manganese

batteries.

•Do not mix old and new batteries.

DVD/VCR Switching

Since this product comprises DVD player and VCR, it is

necessary to select the correct output mode.

SWITCHING TO DVD MODE

Press DVD on the remote control or OUTPUT on the front

panel. (Make sure that the DVD OUTPUT indicator is lit.)

SWITCHING TO VCR MODE

Press VCR on the remote control or OUTPUT on the front

panel. (Make sure that the VCR OUTPUT indicator is lit.)

Note: • Pressing only OUTPUT on the front panel does not

switch the mode of the remote control. To change the

mode of the remote control, press DVD or VCR on the

remote control.

STANDBY-ON

AUDIO

PAUSE

SETUP

TOP MENU

ENTER

MODE

ZOOM

QUICK - FIND

REPEAT

ANGLE

RETURN

SLOW

VCR DVD

SPEED/

SYSTEM

OPEN/CLOSE

/EJECT

DISPLAY

1 2 3

4 5 6

7 8 9

0+10

PLAY

STOP

REC/OTR

A-B

MODE

SUBTITLE

T - SET

CLEAR/

C.RESET

SKIP/CH.

910

E8BK1BD(EN).fm Page 6 Tuesday, April 4, 2006 6:29 PM

7EN

Rear View

1. Power Cord

Connect to a standard AC outlet.

2. DIGITAL AUDIO OUT (COAXIAL) jack (DVD only)

Connect to an amplifier with a digital input jack such as

Dolby Digital decoder, DTS decoder, etc. Use a

commercially available Coaxial cable.

3. ANALOG AUDIO OUT jacks (DVD only)

Connect to the audio input jacks of your TV or stereo

system. Use commercially available Audio cables.

4. S-VIDEO OUT jack (DVD only)

Connect to the S-VIDEO input jack on your TV. Use a

commercially available S-Video cable.

5. AV1 (TV) jack

Connect to the scart jack on your TV. Use the supplied

scart cable.

6. AV2 (DECODER) jack (VCR only)

Connect a scart cable from another VCR, camcoder, or

an audio/video source.

7. AERIAL jack

Connect to an antenna or cable.

8. RF OUT jack

Connect to the antenna in jack of your TV, cable box or

direct broadcast system. Use the supplied RF cable.

CAUTION: Do not touch the inner pins of the

jacks on the rear panel.

Electrostatic discharge may cause

permanent damage to the unit.

Setting up Your DVD/VCR

Before Connecting

• Be sure to turn off the unit and equipment to be connected

before connecting.

• Refer to the instruction books for your TV, stereo system

and any other equipment to be connected.

• Be sure to keep the unit connection cables separate from

the TV antenna cable when you install the unit, because it

may cause electrical interference when you are watching

television programmes.

• DTS audio cannot be produced with an analogue

connection.

• Please refer to the instruction books of your TV, DVD/

VCR, Stereo System or other devices as necessary to make

the best connections.

• Make one of the following connections, depending on the

capabilities of your existing equipment.

The following guidelines are options for the best picture and

sound quality available on your DVD/VCR.

Picture

1) Use SCART Output (DVD/VCR(AV1 TV)) for the best

picture quality (for DVD and VCR features).

2) Use S-VIDEO OUT for the better picture quality (for

DVD features only).

Note: • When your TV conforms to RGB input signal, the

Euro AV (scart) connection ensures you the best

picture and audio quality. However if your TV does

not conform to RGB input signal, the S-VIDEO

OUT and ANALOG AUDIO OUT connection is

better (for DVD features only).

Sound

1) Use SCART Output (DVD/VCR(AV1 TV)) for best

sound quality (for DVD and VCR features).

2) Digital audio connection provides the clearest sound.

Connect the unit’s DIGITAL AUDIO OUT (COAXIAL)

to your amplifier or receiver (for DVD features only).

3) If digital connection is not possible, connect the unit’s

ANALOG AUDIO OUT (Left and Right) to your

amplifier, receiver, stereo or TV (for DVD features only).

WARNING!

• Never make or change connections with the power

switched on.

• Connect the unit directly to your TV, instead of eg. a VCR,

to avoid distortion because DVD-Video discs are copy

protected.

• Do not connect the ANALOG AUDIO OUT of the unit

to PHONO IN of your amplifier or receiver.

• If you use the Scart cable, it is not necessary to connect the

analogue Audio cables.

Connecting to a TV

1) Disconnect the TV’s power cord from the AC outlet.

2) Disconnect the antenna or cable from your TV.

3) Connect that antenna or cable to the AERIAL jack of this

unit.

4) Connect the RF OUT jack of this unit to the antenna in

jack of your TV. Use the supplied RF cable.

5) Connect the AV1 (TV) scart jack of this unit to the scart

input jack of your TV. Use the supplied Scart cable.

6) Plug in the TV and this unit.

Note: • The TV must be connected to this unit through AV1

(TV) jack. A connection to AV2 (DECODER) jack

will not function correctly.

•Playback picture from DVD and VCR cannot be

delivered through the RF cable. The RF cable is only

for sending the antenna signal to the TV.

RF OUT

AERIAL

VCR

AV2 (DECODER)

DVD/VCR AV1 (TV)

DVD

COAXIAL

DIGITAL

AUDIO OUT ANALOG

AUDIO OUT S-VIDEO

OUT

123456 78

RF OUT

AERIAL

VCR

AV2 (DECODER)

DVD/VCR AV1 (TV)

DVD

COAXIAL

DIGITAL

AUDIO OUT ANALOG

AUDIO OUT S-VIDEO

OUT

VHF/UHF

MIXER

to aerial jack

RF cable

(supplied)

Scart cable

(supplied)

to 21-pin

scart jack

(TV)

UHF VHF

E8BK1BD(EN).fm Page 7 Tuesday, April 4, 2006 6:29 PM

8EN

If your TV has no scart input jack but has an

S-VIDEO input jack,

1) Follow the steps 1) to 4) right under “Connecting to a

TV”.

2) Connect the S-VIDEO OUT jack on this unit to the

S-VIDEO input jack on your TV.

3) Connect the ANALOG AUDIO OUT jacks of this unit

to the analogue audio input jacks of your TV.

4) Plug in the TV and this unit.

Note: • The S-VIDEO connection only supplies video

(picture) in the DVD mode.

•Set “DOLBY DIGITAL” to “PCM” for the AUDIO

setting in the setup mode.

Playing a DVD using incorrect settings may generate

noise distortion and may also damage the speakers.

(Refer to page 24.)

For Better Sound (for DVD Features)

These 2 connections are optional for better sound.

1) For clear digital sound quality, use the DIGITAL AUDIO

OUT (COAXIAL) jack for the connection to your digital

audio system.

•If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will produce

a strong, distorted sound or no sound at all.

Hints for connecting to a Dolby Digital

decoder, DTS decoder or MPEG decoder

• By connecting this unit to a Multi-channel Dolby Digital

decoder, you can enjoy high-quality Multi-channel Dolby

Digital surround sound as heard in the movie theaters.

• When this unit is connected to a DTS decoder, you can

enjoy Multi-channel surround system which reproduces the

original sound as truthfully as possible. Multi-channel

surround system is developed by the Digital Theater

Systems, Inc.

• A digital component with a built-in MPEG 2, Dolby

DigitalTM or DTS decoder allows you to enjoy the surround

sound while producing the effecting of being in a movie

theater or a concert hall.

• If output is Dolby Digital encoded audio, connect to a

Dolby Digital decoder, and set “DOLBY DIGITAL” to

“BITSTREAM” in the AUDIO menu. (Refer to page 24.)

• If output is DTS encoded audio, connect to a DTS

decoder, and set “DTS” to “BITSTREAM” in the AUDIO

menu. (Refer to page 24.)

• If output is MPEG encoded audio, connect to an MPEG

decoder, and set “MPEG” to “BITSTREAM” in the

AUDIO menu. (Refer to page 24.)

Hints for connecting to an MD deck or DAT

deck

• The audio source on a disc in a Dolby Digital Multi-

channel surround format cannot be recorded as digital

sound by an MD or DAT deck.

• Unless connected to a Dolby Digital decoder, set “DOLBY

DIGITAL” to “PCM” in the AUDIO menu. Playing a

DVD using incorrect settings may generate noise

distortion, and damage the speakers. (Refer to page 24.)

• Set “DOLBY DIGITAL” and “MPEG” to “PCM” and set

“DTS” to “OFF” in the AUDIO menu for connecting to

an MD deck or DAT deck. (Refer to page 24.)

2) For dynamic sound effects, use the ANALOG AUDIO

OUT jacks for the connection to your audio system.

VCR

AV2 (DECODER)

DVD/VCR AV1 (TV)

DVD

COAXIAL

DIGITAL

AUDIO OUT ANALOG

AUDIO OUT S-VIDEO

OUT

S-VIDEO

AUDIO

DVD/VCR

S-Video cable

(not supplied)

Audio cable

(not supplied)

(Back of the unit)

COAXIAL

Digital Audio

Input jack

Coaxial

cable

(not supplied)

DVD/VCR

Dolby Digital decoder,

DTS decoder or

MPEG decoder etc.

COAXIAL

DIGITAL

AUDIO OUT

“DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

AUDIO SYSTEM

DVD/VCR

Audio

ANALOG

AUDIO OUT

Audio cable

(not supplied)

E8BK1BD(EN).fm Page 8 Tuesday, April 4, 2006 6:29 PM

9EN

External Input Mode (for VCR Features)

Connect an external device (a decoder, a camcorder, etc.) to

the AV2 (DECODER) jack. Press 0,0,2 with the Number

buttons, so that “AV2” appears on the TV screen.

If you use the front AUDIO/VIDEO input jacks, press 0,0,3

with the Number buttons, so that “AV3” appears on the TV

screen.

If you use the AV1 (TV) jack for connecting a device, press 0,

0,1 with the Number buttons, so that “AV1” appears on the

TV screen.

Video Cassette Tape

This unit will operate with any cassette that bears the VHS

mark. For best results, we recommend the use of high-quality

tapes. Do not use poor quality or damaged tapes.

• You can prevent accidental erasing of a recording by

breaking off the erase-prevention tab on the back edge of

the cassette.

• If you decide to record on the tape again, cover the hole

with plastic tape.

TV Colour System

Different countries use different television colour systems.

Tapes recorded in the PAL or NTSC system can be played

back on this unit. Usually, the picture on the TV screen will

be in black and white when you play back a tape that is

recorded in a different colour system.

Tapes recorded in the NTSC system can be played back on

this unit and a PAL system TV set. This feature is only

available in the SP mode. When playing back such tapes, the

picture may roll up or down, shrink vertically and black bars

may appear both at the top and bottom of the screen. Adjust

the vertical hold control on your TV, if the TV features this

control.

Setting the Clock

This unit incorporates a 24-hour clock. The clock must be set

for the Timer Recording function to operate correctly.

• Use the remote control for this procedure.

1) Press VCR, then MENU.

2) Press Kor Lto select “INITIAL”, then press B.

3) Press Kor Lto select “CLOCK”, then press B.

4) Press Kor Luntil the relevant year appears, then press B.

5) Press Kor Luntil the relevant month appears, then press

6) Press Kor Luntil the relevant day appears, then press B.

7) Press Kor Luntil the relevant hour appears, then press B.

8) Press Kor Luntil the relevant minute appears.

9) Press MENU to start the clock.

Note: • Press sto go back to the item you want to correct

during steps 5) to 8).

•Although seconds are not displayed, they begin

counting from 00 when you exit by pressing MENU.

Use this feature to synchronize the clock with the

correct time.

•If this unit is unplugged or if there is a power failure

for more than 30 seconds, you may have to reset the

clock.

Channel Presetting

Tuning of broadcast channels not already preset in the unit

can be performed in two ways.

Automatic Channel Preset

•By“AUTOMATICALLY”tuningchannels and placing

them in sequential order in the unit’s memory i.e. the first

channel found will be memorised into the unit’s channel

position 1, the second channel found will be memorised

into the unit’s channel position 2 and so on.

• Execution of the “Automatic” channel presetting cancels all

the preset channels. DO NOT use this feature if you intend

to use some of the pre-tuned channels. Use the “Manual”

channel presetting function to tune in the additional

channels you require.

Manual Channel Preset

• Each channel is tuned manually and individually. Follow

the steps laid out in the “Manual Channel Preset”.

Automatic Channel Preset

You can programme the tuner to scan only the channels that

you can receive in your area.

• Use the remote control for this procedure.

1) Turn on the TV and select the TV channel to the video

channel on the TV.

2) Press VCR, then MENU.

3) Press Kor Lto select “INITIAL”, then press B.

4) Press Kor Lto select “CH TUNING”, then press B.

5) Press Kor Lto select “AUTO”, then press B.

•The tuner scans and memorises all the active channels in

your area. After scanning, the tuner stops on the lowest

memorised channel.

Ta b

TIMER

SET UP

INITIAL

CH TUNING

CLOCK

YEAR 2 0 0 6

MONTH 0 1

DAY 0 4 WE

HOUR _ _

MINUTE _ _

INITIAL

CH TUNING

CLOCK

CH TUNING

AUTO

MANUAL

MOVE

scanning

TIMER

SET UP

INITIAL

E8BK1BD(EN).fm Page 9 Tuesday, April 4, 2006 6:29 PM

10 EN

To Select a Desired Channel

You can select a desired channel by using CH. (K/L), or

directly pressing the Number buttons on the remote control.

• Enter a channel numbers as a two-digit number for the

quickest results. For example, to select channel 6, press 0

and 6. If you only press 6, channel 6 will be selected after a

brief delay.

• You can only select channels 01–99.

Manual Channel Preset

• Use the remote control for this procedure.

1) Press VCR, then MENU.

2) Press Kor Lto select “INITIAL”, then press B.

3) Press Kor Lto select “CH TUNING”, then press B.

4) Press Kor Lto select “MANUAL”, then press B.

5) Press Kor Lto select “POSITION”, then press B.

•When a weak signal is received in Manual Tuning mode,

you can change the background to solid blue or the

static screen by pressing C.RESET.

6) Press the Number buttons, Kor Lto select your desired

position number, then press B.

•You can select position number 01-99.

•If “ON” appears on the right side of “SKIP”, press Kor

Lto point to “SKIP”. Then, press Bto select “OFF”.

•If you want to remove scrambled signals, press Kor L

repeatedly to point to “DECODER”. Then, press Bto

select “ON”.

7) Press Kor Lto select “CHANNEL”, then press B.

8) Press Kor Lto start scanning.

•The unit’s tuner will begin to search up or down

automatically. When a channel is found, the unit will

stop searching and the picture will appear on the TV

Screen.

•You can select desired channel number by using

the Number buttons. You must refer to the following

Channel Plan table and press three digits to select the

channel number.

(To select channel 24, press “0” button first and then

press “2” and “4”.)

•If this is the channel you want, press B.

This unit can receive Hyper and Oscar frequency bands.

9) Press MENU to exit.

Note: • To confirm that a channel has been added, press

CH. (K/L).

To Skip a Preset Channel

The channels you can no longer receive or seldom watch can

be set to be skipped when you access channels by pressing

CH. (K/L).

• Use the remote control for this procedure.

1) Press VCR, then MENU.

2) Press Kor Lto select “INITIAL”, then press B.

3) Press Kor Lto select “CH TUNING”, then press B.

4) Press Kor Lto select “MANUAL”, then press B.

5) Press Kor Lto select “POSITION”, then press B.

6) Press the Number buttons, Kor Lto select relevant

position number, then press B.

7) Press Kor Lto select “SKIP”, then press Bto select

“ON”.

•To memorise the channel again, press B. “ON” will

change to “OFF”.

8) Press MENU to exit.

Note: • To confirm that a channel has been deleted, press

CH. (K/L).

Channel Reprogramming

You can replace two channels.

• Use the remote control for this procedure.

1) Press VCR, then MENU.

2) Press Kor Lto select “INITIAL”, then press B.

3) Press Kor Lto select “CH TUNING”, then press B.

4) Press Kor Lrepeatedly to select “MOVE”, then press B.

5) Press Kor Lrepeatedly to select the position number you

want to change the channel, then press B.

•You cannot select a position number where “- - -”

appears next to the number. This is because “SKIP” is

set to “ON” for this position number.

•When a weak signal is received in Channel

Reprogramming mode, you can change the background

to solid blue by pressing C.RESET.

If you press the button again, the background will return

to the static screen.

6) Press Kor Lrepeatedly until the channel move to another

position number, then press B.

Channel Plan

CH Indication TV Channel

01 – 10 IRA – IRJ, GAP

21 – 69 E21 – E69

74 – 78 X, Y, Z, Z+1, Z+2

80 – 99, 100 S1 – S20, GAP

121 – 141 S21 – S41

INITIAL

CH TUNING

CLOCK

CH TUNING

AUTO

MANUAL

MOVE

MANUAL

POSITION

CHANNEL

DECODER

SKIP

P08

008

[OFF]

TIMER

SET UP

INITIAL

CH TUNING

CLOCK

MANUAL

POSITION

CHANNEL

DECODER

SKIP

P08

008

[OFF]

[ON]

CH TUNING

AUTO

MANUAL

MOVE

TIMER

SET UP

INITIAL

E8BK1BD(EN).fm Page 10 Tuesday, April 4, 2006 6:29 PM

11 EN

7) Press MENU to exit.

VCR Operation

VCR Features

Ensure that all VCR setting begins in VCR mode by pressing

VCR. (Make sure that the VCR OUTPUT indicator is lit.)

Playback

1) Turn on the TV and select the video channel on the TV.

2) Insert a pre-recorded tape.

•The unit will turn on automatically. If the erase-

prevention tab has been removed, the unit will start

playback automatically.

•If the unit’s power was already on, press VCR to switch

to VCR mode.

3) If playback does not start automatically, press VCR, then

press PLAY B.

•Using the buttons on the unit

Just press PLAY Bon the unit. Power will automatically

turn on and playback will start. (Direct Button

Operation)

•Using the buttons on the remote control

Press STANDBY-ON to turn on, and then press PLAY B.

4) Press STOP Cto stop playback.

Tracking Adjustment

• Tracking adjustment will be activated automatically

(Digital Tracking function) when you start playback.

• When playing pre-recorded tapes or tapes recorded on the

units other than your own, noise lines (black and white

streaks) may appear on the playback picture. If this occurs,

you can adjust the tracking control manually by pressing

CH. (K/L) until the streaks disappear. To return to the

DTR function, stop the tape once and start playback again.

• You can reduce the noise lines by pressing CH. (K/L) in

Slow mode, too. Slow tracking adjustment is not set

automatically.

• In the Still mode, press SLOW, and press CH. (K/L) until

the streaks disappear. To return to the Still mode, press

PAUSE Fagain.

Speed Search

1) Press gor hduring playback to view a videotape at a

high speed in either a forward or reverse direction. In this

mode, the sound will be muted.

2) Press the button again, the unit will now search in super

high speed. (This function will not operate for a NTSC

tape.)

3) Press PLAY Bto return to normal playback.

Still Picture

Press PAUSE Fduring playback to view a still picture on the

TV screen.

• When the picture begins to vibrate vertically, stabilize the

picture by pressing CH. (K/L) in the Still mode.

• After the unit has been in Still mode for 5 minutes, it will

stop automatically to protect the tape and the video head.

• Usually there will be video “noise” lines (black and white

streaks or dots) on the screen. This is normal.

The still picture will, in addition to containing the “noise”

lines, be black and white.

This is not a fault of the unit but merely a by-product of

the technology involved in producing a DVD/VCR with

LP mode.

Slow Motion

•PressSLOW to reduce the playback speed. The unit mutes

the sound during slow motion. You can control the speed

by pressing g(faster) or h(slower). Press PLAY Bto

return to normal playback.

• If it is left in the Slow mode for more than 5 minutes, the

unit will automatically switch to the Stop mode.

Auto Repeat Playback

The unit has an auto repeat function that allows you to repeat

a tape indefinitely without touching PLAY B.

• Use the remote control for this procedure.

• Insert a pre-recorded tape.

INITIAL

CH TUNING

CLOCK

CH TUNING

AUTO

MANUAL

MOVE

P01:

P02:

P03:

P04:

P05:

P06:

P07:

P08:

P09:

P10:

Position

Number Channel

Number

[ ]

MOVE

P01:

P02:

P03:

P04:

P05:

P06:

P07:

P08:

P09:

P10:

[ ]

TIMER

SET UP

INITIAL

MOVE

P01:

P02:

P03:

P04:

P05:

P06:

P07:

P08:

P09:

P10:

E8BK1BD(EN).fm Page 11 Tuesday, April 4, 2006 6:29 PM

12 EN

1) Press VCR, then MENU.

2) Press Kor Lto select “SET UP”, then press B.

3) Press Kor Lto select “AUTO REPEAT”.

4) Press Bso that “ON” appears next to “AUTO REPEAT”

on the TV screen.

•When in Stop mode, Auto Repeat mode will start

automatically.

•If the on-screen menu still remains, press MENU to exit,

then press PLAY B.

Note: • Once you select the Auto Repeat mode, it stays in

effect even after you turn off the unit.

To Stop Playback

Press STOP C.

To Exit the Auto Repeat Mode

Repeat steps 1) to 3). Then, press B.

“OFF” will appear next to “AUTO REPEAT” on the TV

screen. Press MENU to exit.

Picture Select

This function enables you to select the picture quality of a

tape.

• Use the remote control for this procedure.

1) Press VCR, then MENU.

2) Press Kor Lto select “SET UP”, then press B.

3) Press Kor Lto select “PICTURE”.

4) Press Buntil the desired mode (NORMAL, SOFT or

SHARP) is indicated on the TV screen.

5) Press MENU to exit.

Note: • Once you select the Picture Select mode, it stays in

effect even after you turn off the unit.

Auto Return

When Timer Recording is finished, the unit will automatically

rewind the tape to the beginning where it started recording.

If there are any remaining programmes including Daily,

Everyday or Weekly, Auto Return will not operate.

1) Press VCR, then MENU.

2) Press Kor Lrepeatedly to point to “SET UP”, then press

3) Press Kor Lto point to “AUTO RETURN”, then press

“ON” will appear next to “AUTO RETURN”.

4) Press MENU.

Watch the Recorded Timer Programme

Press T-SET to turn on the unit and press VCR, then press

PLAY B.

Quick-Find

This function enables you to search and confirm the contents

of the recorded programme(s) using the index mark.

• Use the remote control for this procedure.

• The tape must be fully rewound.

1) Press VCR, then QUICK-FIND.

To Skip to the Beginning of Next Programme

1) Press QUICK-FIND.

To View at Normal Speed

1) Press PLAY B.

•The Quick-Find is cancelled.

Note: • This function will not operate in the Recording mode.

•When you want to cancel the Quick-Find while in

progress, press STOP C.

•When the end of a tape is reached during the Quick-

Find, the tape will be automatically rewound to the

beginning. After rewinding finishes, the unit will eject

the tape.

Index Search

This function enables you to search the beginning of the

desired programme recorded an index mark.

• The index mark will be made automatically when

REC/OTR is pressed. It will also be marked at the starting

point of Timer Recording and OTR.

• The index mark is not recorded if PAUSE Fis pressed and

released during recording.

• The time gap between index marks on the tape should be

greater than 1 minute for SP recording and 2 minutes for

LP recording.

• Use the remote control for this procedure.

1) Press VCR, then SEARCH MODE.

2) Press Kor Lrepeatedly until the number of programmes

that you want to skip appears.

3) Press sor Bto start Index Search.

•The unit begins rewinding or fast forwarding to the

beginning of desired programme. When the preset

programme is reached, the unit will start playback

automatically.

Note: • Index Search can be set up to 20.

•This function will not operate in the Recording mode.

•Operations must be followed up within 30 seconds

from steps 2) to 3), otherwise the Index Search mode

will be cancelled.

•To exit the Index Search mode, press MENU in step 2)

or press STOP Cafter step 3).

TIMER

SET UP

INITIAL

SET UP

AUTO REPEAT [ON]

PICTURE [NORMAL]

AUTO RETURN [ON]

TIMER

SET UP

INITIAL

TIMER

SET UP

INITIAL

TIMER

SET UP

INITIAL

SET UP

AUTO REPEAT [ON]

PICTURE [NORMAL]

AUTO RETURN [ON]

E8BK1BD(EN).fm Page 12 Tuesday, April 4, 2006 6:29 PM

13 EN

Time Search

This feature allows you to go to a specific point on a tape by

entering the exact amount of time you wish to skip in order to

reach the point.

If a tape includes both programmes recorded in the PAL

system and ones recorded in the NTSC system, this function

may not be operated correctly.

• Use the remote control for this procedure.

1) Press VCR, then SEARCH MODE twice.

2) Press Kor Lrepeatedly until the desired time appears.

3) Press sor Bto start Time Search.

•The unit begins rewinding or fast forwarding to the

specified point. When 0:00 is reached, the unit will start

playback automatically.

Note: • Time Search can be set up to 9 hours 59 minutes

(9:59).

•This function will not operate in the Recording mode.

•Operations must be followed up within 30 seconds

from steps 2) to 3), otherwise the Time Search mode

will be cancelled.

•To exit the Time Search mode, press MENU in step 2)

or press STOP Cafter step 3).

Recording

Viewing and Recording the Same Programme

1) Insert a cassette tape with its erase-prevention tab in place.

(If necessary, rewind or fast forward the tape to the point

at which you want to begin recording.) Press VCR.

2) Press the Number buttons or CH. (K/L) to select the

channel to be recorded.

3) Press SPEED/SYSTEM to select the tape speed (SP/LP).

4) Press REC/OTR to begin recording.

•The REC indicator on the front panel comes on.

5) Press STOP Cwhen recording is completed.

Two Different Tape Speeds

Before recording, select the tape speed: SP mode (Standard

Play) or LP mode (Long Play). The table below shows the

maximum recording/playback time using E-60, E-120, E-180

or E-240 tapes in each mode.

Skipping Unwanted Programme Material During

Recording

1) Press PAUSE Fwhen you want to temporarily halt

recording.

You can check the remaining pause time with

marks on

the TV screen. Each

mark represents 1 minute. After 5

minutes, the unit will automatically switch to the Stop

mode to prevent tape damage.

2) Press PAUSE For REC/OTR to resume recording.

Recording One Programme While Viewing Another

You can record one programme while viewing another. To

start recording, follow steps 1) to 4) under “Viewing and

Recording the Same Programme”. Then, set the TV to the

channel you want to watch.

To Monitor the Progress of Your Recording

Select the video channel on the TV.

Assemble Function

You can record in continuation from previous programme on

a pre-recorded tape.

1) Insert a pre-recorded tape. Press PLAY Bto start playback.

2) Press PAUSE Fat the desired point on the tape.

3) Press REC/OTR. The unit will be in the Recording Pause

mode.

4) Press CH. (K/L) to select the channel to be recorded.

5) Press REC/OTR or PAUSE F. The recording will begin.

6) Press STOP Cwhen recording is completed.

Note: • DVD to VCR dubbing via the DVD/VCR deck of

this unit is not supported.

OTR (One Touch Recording)

This function enables you to set the duration of a recording

simply by pressing REC/OTR.

1) Follow steps 1) to 3) in “Viewing and Recording the Same

Programme”.

2) Press REC/OTR repeatedly until the desired recording

length appears in the upper left corner of the TV screen.

Recording stops when 0:00 is reached.

• To check time remaining during an OTR, press DISPLAY.

• To change the recording length during an OTR, press

REC/OTR repeatedly until the desired length appears.

• To stop an OTR before recording is finished, press

STOP C.

• To cancel the OTR but continue recording, press REC/OTR

repeatedly until “I” appears without the recording length.

Timer Recording

You may programme the unit to start and end a recording

while you are away. You can set 8 programmes to record on

specific days, daily or weekly within a 1-year period.

• Use the remote control for this procedure.

• Insert a cassette tape with its erase-prevention tab in place.

(If necessary, rewind or fast forward the tape to the point at

which you want to begin recording.)

1) Press VCR, then MENU.

2) Press Kor Lto select “TIMER”, then press B.

Note: • If you have not set the clock yet, “CLOCK” setting

menu appears. If so, follow the steps outlined in the

“Setting the Clock”. (Refer to page 9.) Then, set the

timer.

•WhenyoupressBafter pressing Kor Lduring steps 3) to

7), the input mode will move to the next item.

• If you do not press Bwithin 5 seconds of setting an item,

the input mode will move to the next item.

•Press

sto go back to the previous item from the current

setting during steps 4) to 8). If sis pressed when the

TIMER NUMBER is flashing, the entire programme

contents will be erased.

3) Programme number flashes. Press Kor Lrepeatedly until

the desired programme number appears. Then, press B.

4) Select once, daily, everyday or weekly recording.

For once-only recording: Press Kor Lrepeatedly until

the relevant month appears, and then press Kor L

repeatedly until your desired day appears.

Tape Type Recording/Playback Time

Tape Speed SP Mode LP Mode

E-60 1 hour 2 hours

E-120 2 hours 4 hours

E-180 3 hours 6 hours

E-240 4 hours 8 hours

II[0:30] I[1:00]... I[7:30] I[8:00]

(Normal (OTR:

recording) 30 minutes)

E8BK1BD(EN).fm Page 13 Tuesday, April 4, 2006 6:29 PM

14 EN

For daily recording: To record a TV programme at the

same time on the same channel from Monday through

Friday. While the month digit is flashing, press Kor L

repeatedly to select “MO-FR”.

For everyday recording: To record a TV programme at

the same time on the same channel everyday. While the

month digit is flashing, press Kor Lrepeatedly to select

“MO-SU”.

For weekly recording: To record a TV programme at the

same time on the same channel every week. While the

month digit is flashing, press Kor Lrepeatedly to select

“W-MO” (example: every monday).

5) Press Kor Lrepeatedly until the relevant start hour

appears. Next, enter the minute digit.

6) Press Kor Lrepeatedly until the relevant end hour

appears. Next, enter the minute digit.

7) Press Kor Lrepeatedly until the relevant channel number

appears.

8) Press Kor Lrepeatedly until the desired tape speed

appears.

9) Press B. Programme is now completed.

•To set another timer programme, repeat steps 3) to 9).

10)Press MENU to exit.

11)Press T-SET to activate a Timer Recording.

•If the unit switches to the DVD mode after pressing

T-SET, the TIMER indicator will not light up. The

TIMER indicator will light up when the unit is turned

off by pressing STANDBY-ON.

•If the unit is turned off after pressing T-SET, the TIMER

indicator will light up.

To Stop a Timer Programme Which Has Already

Started

Press STOP/EJECT on the unit.

Note: • STOP Con the remote control will not function in the

Timer Recording mode.

To Correct Timer Programmes

If the unit is already in timer standby mode, press

STOP/EJECT on the front panel or T-SET on the remote

control to exit from the standby mode.

1) Repeat steps 1) to 3) in the “Timer Recording”.

2) Select the setting you want to change using sor B.

3) Enter the correct numbers using Kor L, then press B.

4) Press MENU to exit.

5) Press T-SET to return to timer standby mode.

To Cancel or Check the Start/End Time

If the unit is already in timer standby mode, press

STOP/EJECT on the front panel or T-SET on the remote

control to exit from the standby mode.

1) Repeat steps 1) to 2) in the “Timer Recording”.

2) Select the programme number you want to check using K

or L. The details of selected programme appears on the

TV screen. You may cancel the entire programme by

pressing s.

3) Press MENU to exit.

Avoid Overlap of TIMER Programmes...

A timer programme does not work while another programme

is under execution.

Hints for OTR and Timer Recording

•Press

VCR on the remote control before you set Timer

Recording. Make sure the remote control is in the VCR

mode, then press T-SET.

• If a tape is not in the unit or does not have the erase-

prevention tab, the TIMER indicator flashes and Timer

Recording cannot be performed. Please insert a recordable

tape.

•When Timer Recordings are set, the TIMER indicator will

light up. To use the VCR as usual until the time for the

recording, press T-SET so that the TIMER indicator lights

off. Select either VCR or DVD mode, then continue with

the other features as described in this manual.

After an OTR and a Timer Recording has been set,

this unit operates as follows:

• If a tape runs out before an OTR or a Timer Recording is

finished, the unit ejects the tape and switches to the DVD

mode automatically. If the DVD power is off, the unit does

not switch to the DVD mode but goes into the timer

standby mode. Press T-SET on the remote control or

STOP/EJECT on the unit, then press VCR to activate the

VCR function again.

• Once the unit turns to the timer standby mode, no VCR

functions are available until T-SET is pressed. (OUTPUT on

the front panel and VCR on the remote control will not

function.)

• To cancel the timer standby mode, press T-SET on the

remote control or STOP/EJECT on the unit, then press

VCR to activate the VCR function again.

• The mode of the unit and the remote control may differ

(VCR mode or DVD mode) when you set Timer

Recording or after you cancelled Timer Recording.

•Press

VCR or DVD on the remote control to select your

desired mode before you operate.

When an OTR or a Timer Recording is completed...

• If Auto Power Off for DVD has been activated and there

are Timer Recordings on standby, the unit turns off

automatically, and the TIMER indicator on the front panel

lights up to indicate the unit is in the timer standby mode.

• The TIMER indicator on the front panel flashes if there are

no more Timer Recordings on standby.

• If Auto Power Off for DVD has NOT been activated, the

unit switches to the DVD mode and all the VCR function

will be unavailable. The TIMER indicator will not light up

as long as the DVD is in use. All the DVD functions are

available during OTR, timer standby mode and Timer

Recording.

TIMER

SET UP

INITIAL

TIMER NUMBER

START

END

DATE

CHANNEL

SPEED

--/--

--:--

9:00 10:00 11:00

Programme 1

Programme 2

Programme 3

E8BK1BD(EN).fm Page 14 Tuesday, April 4, 2006 6:29 PM

15 EN

If you want to use the unit during a Timer

Recording or while the TIMER indicator is on or

flashing.

•PressSTANDBY-ON to turn on the unit. Press DVD on the

remote control to choose DVD mode, then continue with

the other DVD features as described in this manual. You

don’t need to set the TIMER off to use the unit.

Note (for Timer Recording) :

• If there is a power failure or the unit is unplugged for more

than 30 seconds, clock and all timer settings will be lost.

Copying a Video Tape

You can make copies of videotapes made by friends or relatives

for your own enjoyment.

Connect the recording DVD/VCR (this unit), playing VCR

(another VCR) and your TV as outline in the following

diagrams.

1) Insert a pre-recorded videocassette into the playing VCR.

2) Insert video cassette tape with its erase-prevention tab in

place into the cassette compartment of the recording unit.

3) Press SPEED/SYSTEM to select the desired recording

speed (SP/LP).

4) Select “AV2” or “AV3” position on the recording unit.

See “External Input Mode (for VCR Features)”. (Refer to

page 9.)

5) Press REC/OTR on the recording unit.

6) Begin playback of the tape in the playing VCR.

7) To s t o p r e c o r d i ng , p r e s s STOP/EJECT on the recording

unit, then stop playback of the tape in the playing VCR.

Note: • For best results during dubbing, use the unit’s front

panel controls whenever possible. The remote control

might affect the playing VCR’s operation.

•If video or colour fades in and out, you may be

copying a copy guarded video tape.

•Unauthorised recording of copyrighted materials may

infringe on the rights of copyright owners, violate

Status Display

To check the Counter, or Clock & Channel number, press

DISPLAY. Each time you press DISPLAY, TV screen will

change as illustrated:

When you select the channel using the Number buttons, select

the desired channel (position number).

Note: • If the on screen display shows an abnormal reading or

no reading, unplug this unit for 30 seconds, then

replug it again.

Please note that clock and timer settings will be cleared

after disconnection.

Real Time Tape Counter

• This counter shows the elapsed recording or playback time

in hours, minutes, and seconds on screen. (Nothing is

shown in the case of blank portion.)

• The “ – ” indication will appear when the tape is rewound

further than the tape counter position “0:00:00”.

Automatic Operations

Automatic Rewind, Eject

When the end of a tape is reached during recording, playback

or fast-forward, the tape will be automatically rewound to the

beginning. After that, the unit will eject the tape.

• The unit will not rewind the tape automatically during

Timer Recording or One Touch Recording.

Tape Eject

A tape can be ejected with the unit power on or off (but the

unit must be plugged in).

• If a Timer Recording is set, press STOP/EJECT twice to

eject a tape.

RF OUT

AERIAL

VCR

AV2 (DECODER)

DVD/VCR AV1 (TV)

DVD

COAXIAL

DIGITAL

AUDIO OUT ANALOG

AUDIO OUT S-VIDEO

OUT

to 21-Pin Scart jack

Playing VCR

(TV)

Recording DVD/VCR

(this unit)

Using scart jacks

OPEN/

STANDBY-ON

REW F.FWD STOP/EJECT PLAY REC/OTR

CHANNEL

VIDEO

AUDIO

OUTPUT STOP PLAYREV-SKIP SKIP/FWD

REC TIMER

VCR DVD DISCIN PLAY

(TV)

Playing VCR

to the audio output jack

to 21-Pin Scart jack

to the video output jack

Recording DVD/VCR (this unit)

to AV1 (TV)

Scart jack on

the back of the

DVD/VCR

Using AV front terminals

■

0:12:34

■

SP 17:40

P02

<CLOCK and CHANNEL

NUMBER mode>

Press once. Press once.

Press once.

E8BK1BD(EN).fm Page 15 Tuesday, April 4, 2006 6:29 PM

16 EN

DVD Operation

Basic Playback

Getting started

• Turn on the power of the TV, amplifier and any other

components which are connected to this unit.

• Make sure the TV and audio receiver (commercially

available) are set to the correct channel.

• Make sure that the DVD OUTPUT indicator is lit. If not,

press DVD to switch to DVD mode.

1) Press STANDBY-ON.

2) Press OPEN/CLOSE to open disc loading tray.

3) Place the chosen disc on the tray, with the label facing up.

4) Press PLAY B.

•The tray will close automatically, and playback will then

start from the first chapter or track of the disc.

•When you play back a DVD with a title menu

recorded, it may appear on the screen. In this case, refer

to “Title Menu”.

5) Press STOP Cto stop playback.

Note: • A “prohibited icon” may appear at the

top-right on the TV screen during

operation, warning that a prohibited

operation has been encountered by this

unit or the disc.

•Some DVDs may be played from title 2 or 3 due to

specific programmes.

•During the playback of two layered disc, pictures may

stop for a moment. This happens while the 1st layer is

being switched to the 2nd layer. This is not a

malfunction.

•DVDs recorded with the NTSC system can be viewed

on PAL, NTSC or Multi system TV. (Refer to page

23.)

•Depending on the TV, when playing back a NTSC

DVD on a PAL TV, the picture may roll up or down,

shrink vertically and black bars may appear at the both

top and bottom of the screen.

•It may take a time to deliver the picture or the sound.

This is not a malfunction.

•You can change the on-screen language in “PLAYER

MENU” setting. (Refer to page 23.)

General Features

DVDs may contain menus to navigate the disc and access

special features. Enter the appropriate Number buttons or

press Cursor K/L/s /B to highlight your selection in the

DVD menu and press ENTER to confirm.

Note: • Unless stated, all operations described are based on

remote control use. Some operations can be carried

out with the buttons on the front panel.

Disc Menus

1) Press MENU.

•The DVD menu will appear.

2) If the feature is not available, symbol may appear on

the TV screen.

3) If disc menu is available on the disc, audio languages,

subtitle options, chapters for the title and other options

will appear for selection.

4) Press Cursor K/L/s /B to select an item, and press

ENTER to confirm selection.

Title Menu

1) Press TOP MENU.

•The title menu will appear.

2) If the feature is not available, symbol may appear on

the TV screen.

3) Press Cursor K/L/s /B to select an item, and press

ENTER to confirm selection.

•Playback will begin at the selected title.

Calling up a Menu Screen During Playback

•Press

MENU to call up the DVD menu.

•Press

TOP MENU to call up the title menu.

Note: • Contents of menus and corresponding menu

operations may vary between discs. Refer to the

manual accompanying the disc for details.

DVD-V CD MP3 JPEG DVD-V

DVD-V

E8BK1BD(EN).fm Page 16 Tuesday, April 4, 2006 6:29 PM

17 EN

MP3 / JPEG Playback

Insert an MP3/JPEG-format disc, then the FILE LIST will

automatically appear on the TV screen.

1) Press Kor Lto select the desired group or track.

•If a group is selected, press Bor ENTER to go on to the

track selection screen. Press Kor Lto choose a track,

then press PLAY Bor ENTER.

•If a track is selected, press PLAY Bor ENTER to start

playing the tracks. Playback will start from the selected

track and will play one after another.

•Press sto go back to the previous hierarchy (except for

the top hierarchy).

•Press TOP MENU to return to the first item.

2) Press STOP Cto stop playback.

Note: • Folders are known as Groups, and files are known as

Tracks.

•Folders are accompanied by icon.

•MP3 files are accompanied by icon.

•JPEG files are accompanied by icon.

•A maximum of 255 folders can be recognised.

•A maximum of 999 files can be recognised.

•Up to 8 hierarchies can be recognised.

•The name of group and track can be displayed in up

to 25 characters. Unrecognizable characters will be

replaced with asterisks. The ninth and deeper

hierarchies cannot be displayed.

•Unplayable groups or tracks may be displayed

depending on the recording conditions.

•For MP3 file recorded in Variable Bit Rate (VBR), the

unit may not display the actual elapsed time.

•Progressive JPEGs (JPEG files saved in the progressive

format) can not be played back on this unit.

•High resolution JPEG files take longer to be

displayed.

This unit recommends the files recorded under the following

circumstances:

[MP3]

• Sampling frequency : 44.1 kHz or 48 kHz

• Constant Bit Rate : 32 kbps ~ 320 kbps

[JPEG] Size of picture

• Upper limit : 6,300 x 5,100 dots

• Lower limit : 32 x 32 dots

Kodak Picture CD

The unit can also run JPEG files stored on Kodak Picture

CDs. The Picture CD is a service to convert photographs

taken by a conventional film camera into digital data and write

the data on a CD. You can enjoy picture images on the TV set

by playing back the Picture CDs.

For details of Kodak Picture CD, contact a shop that deals

with developing service of Kodak Inc.

1) Insert a Kodak Picture CD, then Kodak Picture CD menu

will automatically appear on the TV screen.

•If all menu items cannot be displayed in the screen

scope, “G” appears at the right bottom of the screen,

indicating that you can view remaining items on the

next page. “H” appears at the left bottom of the screen,

indicating that you can view other items on the previous

page. The track number of the currently highlighted

item and the total tracks are shown at the centre bottom

of the screen.

•If “G” is shown at the right bottom, use SKIP Gto

view the next page. If “H” is shown at the left bottom,

use SKIP Hto view the previous page.

•It may take some time until all menu items are displayed

on the menu screen.

2) Press Cursor K/L/s /B to select a desired track to be

played, then press PLAY Bor ENTER.

•If a Kodak Picture CD file is selected, an image will be

played back from the selected track and go to the next

one in turn.

3) Press STOP Cto stop playback.

Notes on JPEG and Kodak Picture CD

• A track is displayed for 5 seconds or 10 seconds and then

the next track is displayed. (Refer to page 25.)

• During JPEG or Kodak Picture CD playback, press ANGLE

to rotate a picture 90 degrees clockwise.

Dual Playback

1) Press MENU during MP3/JPEG playback.

•The FILE LIST will appear.

2) Press Kor Lto select a desired JPEG file or MP3 track

from the FILE LIST, and then press PLAY Bor ENTER.

•Dual Playback will begin. Refer to page 25 on how to set

the Dual Playback “ON” or “OFF”.

3) Press STOP Cto stop playback.

Note: • Zooming or rotating a JPEG file during Dual

Playback may cause an intermittent sound.

•Dual Playback may not function properly if MP3 and

JPEG files on the disc interfere each other due to the

difference in their data size.

Slide Show Mode

You can switch to the slide show mode during playback.

1) During playback, press MODE once.

•The slide show mode screen will appear.

•The slide show mode cannot be switched when playback

is stopped, or from the FILE LIST or the Picture CD

menu screen.

2) Press ENTER.

•The slide show mode will change.

CUT IN/OUT : The entire image appears at a time.

FADE IN/OUT : The image appears gradually and then

disappears.

3) Press MODE to exit.

MP3 JPEG

folder name 4

folder name 1

folder name 3

folder name 2

folder name 1

DISC NAME

FILE LIST

FOLDER

MP3

ENTER

PLAY

file name 3

file name 2

file name 1

1/2

JPEG

MP3 JPEG

JPEG

Picture1 Picture2 Picture3

Picture4

Current track number /

the number of total tracks

Picture5 Picture6

1/32

E8BK1BD(EN).fm Page 17 Tuesday, April 4, 2006 6:29 PM

18 EN

Adjustment of Picture Size

Depending on the TV connected to this unit, the overall

picture cannot be displayed and the edge of the picture can be

cut out. In this case, you can adjust the size of the JPEG

playback image on screen.

1) During playback, press MODE twice.

•The setting screen for the picture size adjustment will

appear.

•The setting screen will not be displayed while in the

Stop mode or from the FILE LIST.

2) Press ENTER.

NORMAL : to display the image at 100% of the picture

size.

SMALL : to display the image at 95% of the picture

size.

•The default setting is “NORMAL”.

•This feature may have no effect on some files (e.g. Files

with a small picture size).

3) Press MODE to exit.

Resume

1) During playback, press STOP C.

•Resume message will appear on the TV screen.

2) Press PLAY B.

•Playback will resume from the point at which playback

was stopped.

•To cancel resume, press STOP Ctwice. For MP3 and

JPEG files, the top hierarchy of FILE LIST will

automatically appear on the TV screen.

Note: • For MP3 and JPEG files, playback will resume from

the beginning of the current track.

•The resume information stays on even when the

power is turned off.

Pause

1) During playback, press PAUSE F.

•Playback will be paused and sound will be muted.

•Press PAUSE Fonce during Dual Playback to pause a

JPEG file only. Press PAUSE Fone more time to pause

an MP3 track.

2) To continue playback, press PLAY B.

Note: • On DVDs, set “STILL MODE” to “FIELD” in the

DISPLAY menu if pictures in the pause mode are

blurred. (Refer to page 23.)

Step by Step Playback

1) During playback, press PAUSE F.

•Playback will be paused and sound will be muted.

2) The disc advances by one frame each time PAUSE Fis

pressed.

3) To exit step by step playback, press PLAY B.

Note: • On DVDs, set “STILL MODE” to “FIELD” in the

DISPLAY menu if pictures during step by step

playback are blurred. (Refer to page 23.)

x1.3 and x0.8 Rapid Play with Voice

Available only on discs recorded in the Dolby Digital format,

x1.3 and x0.8 Rapid Play with Voice plays back in slightly

faster/slower speed while keeping the sound quality as in the

normal playback.

1) During playback, press MODE

once.

•The current setting appears.

2) Press sor B to switch among

“ ” (x1.3), “ ” (x0.8) and “OFF”.

: Plays back approximately at 0.8 times of normal

playback.

: Plays back approximately at 1.3 times of normal

playback.

3) To return to normal playback, press PLAY B.

Note: • Audio language setting cannot be made during x1.3

and x0.8 Rapid Play with Voice.

•Virtual Surround setting cannot be changed while

using this mode.

•Virtual Surround does not function while using this

mode.

•This feature may not work at some point in a disc.

•When using digital audio connection, the PCM sound

will be output.

Fast Forward / Reverse Search

1) During playback, press gor hrepeatedly to select the

required forward or reverse speed.

•For DVDs, fast forward or reverse search speed is

different depending on the disc.

•For DVDs, approximate speed is 1(x2), 2(x8), 3(x20),

4(x50) and 5(x100).

•For MP3 and Audio CDs, approximate speed is 1(x2),

2(x8) and 3(x30).

•If you are using SKIP/FWD Gor REV/SKIP Hon the

front panel, press and hold it for more than 1.5 sec.

When you reach the desired speed, release the button.

2) To return to normal playback, press PLAY B.

Note: • On DVDs, set “STILL MODE” to “FIELD” in the

DISPLAY menu if pictures during fast forward and

reverse search are blurred. (Refer to page 23.)

•If you press gor hduring Dual Playback, a JPEG

file will be paused.

Slow Forward / Reverse Search

1) During playback, press PAUSE F.

2) Press gor h.

•Slow motion playback will begin and sound will be

muted.

3) Press gor hrepeatedly to select the required speed.

•Slow forward or reverse speed varies with the disc.

Approximate speed is 1(1/16), 2(1/8) and 3(1/2).

•If you are using SKIP/FWD Gor REV/SKIP Hon the

front panel, press and hold it for more than 1.5 sec.

When you reach the desired speed, release the button.

4) To return to normal playback, press PLAY B.

Note: • On DVDs, set “STILL MODE” to “FIELD” in the

DISPLAY menu if pictures in the slow motion

playback mode are blurred. (Refer to page 23.)

JPEG

DVD-V CD MP3 JPEG

DVD-V

DVD-V CD MP3

DVD-V

OFF

E8BK1BD(EN).fm Page 18 Tuesday, April 4, 2006 6:29 PM

19 EN

Zoom

The Zoom function allows you to enlarge the video image and

to pan through the enlarged image.

1) During playback, press ZOOM.

•Playback will continue.

2) Press ZOOM repeatedly to select the required zoom factor:

“x2”, “x4” or “OFF”.

3) Press Cursor K/L/s /B to slide the zoomed picture

across the screen.

•During zoomed playback, the position guide box

appears at the bottom-right on the TV screen. The

position of the blue box inside the gray box indicates the

position of the zoomed image within the overall picture.

To remove the box or show it, press ENTER.

4) To exit Zoom mode, press ZOOM to set to “OFF”.

Note: • Zooming function does not work while the disc menu

is shown.

•x4 zoom is not available on some discs.

•Only x2 zoom is available on JPEG.

•You cannot slide the zoomed picture on some JPEG

files.

•Position guide is not available for JPEG playback.

Audio Language

This unit allows you to change audio languages during DVD

disc (if multi language available) playback.

1) During playback, press AUDIO.

2) Press AUDIO repeatedly to select your desired language.

Note: • The sound mode cannot be changed during playback

of discs not recorded in double sound.

•Audio language setting cannot be made during x1.3

and x0.8 Rapid Play with Voice. (Refer to “x1.3 and

x0.8 Rapid Play with Voice”.)

•If your language is not shown after pressing AUDIO

several times, the disc may not have that language.

However, some discs allow you to change audio

language setting in the disc menu. (Operation varies

with the disc, so refer to the manual included in the

disc.)

•If you choose a language that has a 3-letter language

code, the code will be displayed every time you change

the Audio language setting. If you choose any other

languages, “---” will be displayed instead. (Refer to

page 25.)

Subtitle Language

This unit allows you to change languages for subtitle during

DVD disc (if available) playback.

1) During playback, press SUBTITLE.

2) Press SUBTITLE repeatedly to select your desired subtitle

language.

•The selected language will be displayed on the display

bar at the top of the screen.

3) To turn off subtitles, press SUBTITLE repeatedly until

“OFF” appears.

Note: • If your language is not shown after pressing SUBTITLE

several times, the disc may not have that language.

However, some discs allow you to change subtitle

language setting in the disc menu. (Operation varies

with the disc, so refer to the manual included in the

disc.)

•When “NOT AVAILABLE” appears on the TV

screen, it means no subtitle is recorded on the scene.

•If you choose a language that has a 3-letter language

code, the code will be displayed every time you change

the Subtitle language setting. If you choose any other

languages, “---” will be displayed instead. (Refer to

page 25.)

Camera Angle

Some DVD discs contain scenes which have been shot

simultaneously from various angles. You can change the

camera angle when the ( ) icon appears on the screen.

1) During playback, press ANGLE.

•The selected angle will be displayed on the display bar at

the top of the screen.

2) Press ANGLE repeatedly to select your desired angle.

Note: • If the “ANGLE ICON” setting is “OFF” in the

OTHERS menu, the ( ) icon will not appear.

Stereo Sound Mode

1) During playback, press AUDIO repeatedly to select

“STEREO”, “L-ch” or “R-ch”.

STEREO : Both right and left channels are active (stereo).

L-ch : Only left channel is active.

R-ch : Only right channel is active.

Virtual Surround

You can enjoy stereophonic virtual surround effects on your

existing stereo system.

1) During playback, press MODE repeatedly.

•For MP3 and Audio CDs, press MODE once.

2) Press ENTER to change a value to “1” (Natural effect), “2”

(Emphasised effect) or “OFF” (original sound).

3) Press MODE or RETURN to exit.

Note: • Virtual Surround will not be effective if the sound

mode is set to something other than “STEREO” (for

Audio CDs only). (Refer to “Stereo Sound Mode”.)

•Turn down the level or turn it “OFF” if the sound is

distorted.

•The setting will be saved even if this unit is turned off.

•This function cannot be used during x1.3 and x0.8

Rapid Play with Voice. (Refer to “x1.3 and x0.8 Rapid

Play with Voice”.)

DVD-V JPEG

DVD-V

DVD-V CD MP3

OFF

E8BK1BD(EN).fm Page 19 Tuesday, April 4, 2006 6:29 PM

20 EN

Track Search

There are three ways to begin the playback of a specific track

on a disc.

Using the Number buttons

1) Press the Number buttons to enter the desired track

number.

•Playback will start at the selected track.

•For any discs, to play a single-digit track, press the

number directly (e.g. for track 3, press 3).

•For the disc with less than 100 tracks, to play a double-

digit track, press +10, then the number (e.g. for track 26,

press +10, 2, 6).

•For the disc with more than 100 tracks, to play a double-

digit track, press +10, 0, then the number of the track.

(e.g. for track 26, press +10, 0, 2, 6). To play a triple-

digit track, press +10, then the number of the track (e.g.

for track 126, press +10, 1, 2, 6).

Using SEARCH MODE

1) Press SEARCH MODE.

•The Track Search display appears.

2) Within 30 seconds, select a desired track number using

the Number buttons.

•Playback will start at the selected track.

•For the disc with more than 10 but less than 100 tracks,

to play a single-digit track, press 0first, then the number

of the track (e.g. for track 3, press 0, 3).

•For the disc with more than 100 tracks, to play a single

or a double-digit track, press 0first, then the number of

the track (e.g. for track 3, press 0, 0, 3and for track 26,

press 0, 2, 6).

•In any other cases, just press the number of the track.

Using SKIP HG

During playback, press SKIP Gto move to the next track.

Press it repeatedly to skip subsequent tracks.

Press SKIP Hto go back to the beginning of the current

track. Press it repeatedly to go back to the previous tracks.

•If

SKIP HGare pressed while the playback is paused,

the playback will be paused again after skipping to the

next track.

•During Dual Playback, using SKIP HGwill only

affect MP3 tracks.

•To skip JPEG files, use sor B. If the “SLIDE SHOW”

is set to “MUSIC”, SKIP HGare available for both

MP3 and JPEG files.

Note: • SKIP HGare not available when playback is

stopped.

Chapter / Title Search

Using SEARCH MODE

1) During playback, press SEARCH MODE once for the

Chapter Search, twice for the Title Search.

2) Enter the desired chapter/title number using the Number

buttons.

Using the Number buttons

1) During playback, press the Number buttons to enter the

desired chapter number.

•Playback will start at the selected chapter.

•For single digit chapters (1-9), press a single number

(e.g. to play chapter 3, press 3).

•To play chapter 26, press +10, 2, 6.

Note: • Depending on the disc being played, using

the Number buttons cannot be performed.

Using SKIP HG

During playback, press SKIP Gto go to the next chapter.

Press it repeatedly to skip subsequent chapters.

Press SKIP Hto go back to the beginning of the current

chapter. Press it repeatedly to go back to the previous chapter.

Time Search

1) During playback, press SEARCH MODE repeatedly until

the Time Search screen appears on the TV screen.

2) Within 30 seconds, enter a desired disc time using

the Number buttons.

•Playback will start at the specified time.

•For DVDs, enter a desired time of the current title.

•For Audio CDs, enter a desired time of the current

track.

•Press CLEAR to erase the incorrect input.

Note: • “0” appears automatically when there is no need to

enter a number. For example, “0:0_:_ _” appears in

the Time Search display if the total time of the disc or

track is less than 10 minutes.

•Time Search is not available on some discs.

Marker Setup

Use markers to memorise your favourite places on a disc.

1) During playback, press SEARCH MODE repeatedly until

the Marker Setup screen appears on the TV screen.

2) Press sor Bto select 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 and

ensure that “_ _ _ _:_ _:_ _” appears in the display.

3) When the disc reaches the desired point, press ENTER.

•The Title or Track and elapsed time will appear on the

TV screen.

4) To return to the marker later, press SEARCH MODE

repeatedly until the Marker Setup screen appears and sor

Bto choose the desired marker, then press ENTER.

5) Press SEARCH MODE or RETURN to exit.

Note: • Opening the disc tray, turning off the power or

selecting “AC” at step 2) and press ENTER will erase all

markers.

•To clear a marker, use sor Band select the marker

number to be cleared, and then press CLEAR.

•You can mark up to 10 points.

CD MP3 JPEG

DVD-V

/29

DVD-V CD

1:29:00

TOTAL

E8BK1BD(EN).fm Page 20 Tuesday, April 4, 2006 6:29 PM

Table of contents

Popular VCR System manuals by other brands

Sanyo

Sanyo VHR-M262EV Service manual

Panasonic

Panasonic Omnivision PV-4611 operating instructions

Panasonic

Panasonic Omnivision PV-2905 operating instructions

RCA

RCA VR531 user guide

Sony

Sony SLV-ED1PL Service manual

Fisher

Fisher FVH-T621 operating instructions

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DV-F562 Series Service manual

Sony

Sony 5500 Operation manual

Teac

Teac MV-330P Service manual

JVC

JVC HR-P55A instructions

Sony

Sony SLV-SP70R operating instructions

Panasonic

Panasonic PV-V4524SK operating instructions

Panasonic

Panasonic AG-TL750 user manual

flexvision

flexvision AVP-9500 operating instructions

Philips

Philips VR 656 operating manual

RCA

RCA VR348 user guide

GE VG4250 user guide

JVC

JVC HR-XVC20US Service manual

FUNAI DBVR-7510 User manual

Popular VCR System manuals by other brands