Furniture Pipeline Juneau User manual

UNIT WEIGHT: 18in (10 lbs)
24in (12lbs)
30in (16 lbs)
WEIGHT CAPACITY PER SHELF/TIER: 10 LB

2
AllenWrench
Pipe
Fitting
Set Screw
Fastening System
Each New Age furniture design utilizes asimple & effective fastening system to quickly assemble
your unit. Toreduce assembly time, each fitting (connector) has pre-installed set screws (spare
set screws are provided) atEACH pipe entry location. Set screws are tightened using a 1/8” Allen
Key, which safely secures the pipe in place.
Prior to shipping your unit, each sub-assembly (part) is inspected with great care to ensure thatall
fittings (connectors) & pipes are correctly aligned. Means beyond our control may cause parts to
shift or misalign during shipping & handling.
Please ensure thatall fittings (connectors) are properly aligned bymaking small adjustments &
tightening the set screws with the 1/8” Allen Key provided.
Keep in mind, the unique fastening system provides you with the opportunity to level &make small
adjustments to your unit, achieving the perfect fit for your home!

3
12.00"
38.81"
10.00"
18", 24", or 30"
VARIES*
12.00"
13.4", 19.4", 25.4"
*Varies depending on model size purchased
15.00"
10.19"
0.81"
10.77"

4
DISCLAIMER:
We intend to make this instruction manual accurate and complete. However, we make no claim that
the information contained herein covers all details, conditions or variations, nor does it provide for every
possible contingency in connection with the installation or use of this product. The information
contained in this document is subject to change without notice or obligation of any kind. We assume
no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the
instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do
not follow the corresponding instructions.
WARNING: Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty! It is the installer’s
responsibility to make sure all components are properly assembled and installed using the
instructions provided.
WARNING: Failure to provide adequate structural strength for this component can result in serious
personal injury or damage to equipment! It is the installer’s responsibility to make sure the structure
to which this component is attached can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the component.
WARNING: Exceeding the recommended weight capacity can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to make sure that the combined weight of all
components attached to the supporting structure including all items on display does not exceed the
recommended weight!
WARNING: FURNITURE MAY WEIGH IN EXCESS OF 40 LBS! Always use two people and proper lifting
techniques when installing or positioning furniture.
Wood Disclaimer: We use natural solid wood products to create quality furniture. However, wood
grain is a product of nature, no two grain patterns are ever exactly alike. This individualism is one of
the most appealing factors of solid wood products. Soil and climate affect the growth characteristics
of wood. The finest woods have certain natural characteristics that cannot be hidden with a finishing
process.
These characteristics occur due to the fact that wood is a natural product and is affected by weather,
climate, insects, birds, soil makeup, and natural growth patterns. These characteristics are apparent
and are not to be misinterpreted as defects. Wood is a product of nature- and as such will display
natural characteristics and variances that are unique to each and every cut. These characteristics are
an integral part of the charm and beauty of real solid wood - no two pieces are alike!

5
1
8
[x1]
1/4" Allen Key
Large Key
[x1]
Bottom Crossmember
Assembly
2
NOTE: SMALL ADJUSTMENTS MAY BE NEEDED ON SUBASSEMBLIES DUE TO SHIPPING MOVEMENT
[x3]
Shelf
[x2]
Shelf Support
Assembly
34
[x1]
Left Top
Shelf Support
Assembly
[x1]
Right Top
Shelf Support
Assembly
5
7
[x1]
1/8" Allen Key
Small Key
9
[x4]
Ø8mm X 40mm
Screws
10
[x4]
Plastic Wall
Anchors
6
[x4]
Coupling

6
1
2
USE PART 6
TO TIGHTEN
ALL NEW
CONNECTIONS
[x2]
USE PART 6
TO TIGHTEN
ALL NEW
CONNECTIONS
[x2]
MAKE SURE TO TIGHTEN ALL AREAS!
3
2
1
1
3
FROM STEP 1
Note: For Ease of Assembly, assemble laying down as shown. Protect floor from being scratched by pipe. Pictures are for reference.
6
THREAD
SLIP-ON
6
SLIP-ON
THREAD
BOTH PIPES MUST BE INSERTED
INTO BOTH HOLES AT THE SAME TIME
WHILE ASSEMBLING
BOTH PIPES MUST
BE INSERTED
INTO BOTH HOLES
AT THE SAME TIME
WHILE ASSEMBLING

7
3
WARNING: FAILURE TO SECURE UNIT TO WALL AS SHOWN MAY RESULT IN
SERIOUS INJURY
USE PART 6
TO TIGHTEN
ALL NEW
CONNECTIONS
[x2]
4
5
FROM STEP 2

8
USE PART 7
TO TIGHTEN
PART 8 INTO
WALL STUD
[x4]
7
4
FROM STEP 3
8
IMPORTANT: FAILURE TO PROPERLY SECURE UNIT TO WALL
AS SHOWN MAY RESULT IN INJURY.
1. PLACE THE UNIT IN DESIRED LOCATION AGAINST WALL LINING AT LEAST ONE SIDE UP WITH A STUD.
2. LIGHTLY MARK YOUR WALL USING A PENCIL IN EACH MOUNTING HOLE ON THE FLANGES.
3. REMOVE UNIT FROM WALL AND PREDRILL YOUR MARKED SPOTS USING A 3
16" DRILL BIT.
IF NOT GOING DIRECTLY INTO STUD, USE ANCHOR. DRILL 5
16" HOLE AND HAMMER
ANCHOR INTO PLACE.
4. PLACE UNIT BACK ON WALL AND INSERT SCREWS INTO FLANGES & TIGHTEN USING ALLEN WRENCH.
DO NOT OVER TORQUE.

9
WARRANTY
Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood
-1 Year Limited Warranty-
All metal finishes and other parts and components, excluding wood, are warranted by the company to you, the
original retail purchaser, for a one-year period starting from the date of purchase, to be free from material
manufacturing defects. We will pay, within one-year from the date of purchase, reasonable and standard labor
rates to repair or replace the defective parts including the shipping costs from the retailer to and from the
company or a repair center designated by us at no charge to the original retail purchaser.
LIMITATIONS AND EXCEPTIONS
Under this Limited Warranty, the sole liability of the company is limited to repair, or at company's option,
replacement of any manufacture defected items or parts, excluding wood. We will pay, within one year from
the date of purchase reasonable and standard labor rates to repair or replace the defective parts and shipping
costs from the retailer to and from the company, at no charge to the original retail purchaser. After one year
from the date of purchase, the original retail purchaser will be responsible for labor, packing, and all shipping and
transportation costs.
The Limited Warranty provides coverage to the original retail purchaser and does not apply to rented, business,
commercial, institutional, or other non-residential uses. The Limited Warranty does not apply to (1)
merchandise that was, at any time, used as a floor sample or display model, (2) any merchandise purchased “as
is” or second-hand, (3) any merchandise purchased at a distress sale or a going out of business sale, or (4) any
merchandise purchased from a liquidator. This warranty, whether express or implied, covers only normal
household usage. No warranty, express or implied, applies to any condition resulting from misuse, abuse,
delivery or transportation damage, nor any condition resulting from incorrect or inadequate maintenance,
cleaning or care. The warranty is null and void if the furniture has been moved from original point of delivery to
the consumer.
Finishes of Metal and Metal Components
The Limited Warranty, of "Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding
Wood", does not cover (1) damages resulting from excessive soiling, improper or unapproved cleaning methods,
(2) fading or other damages resulting from exposure to sunlight, (3) damages resulting from household
humidity, or (4) damages resulting from any liquid, including but not limited to alcohol and water based cleaning
products. Any use of improper or unapproved cleaning methods voids all warranties.
Modifications to Products
The Limited Warranty does not apply to any product that has been altered by any person, dealer, or company
without the express written authorization of us.
Implied Warranty
IMPLIED WARRANTY, INCLUDING ANY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
IMPOSED ON THE SALE OF THIS FURNITURE AND ITS PARTS UNDER STATE LAW, ARE LIMITED TO THE
FOLLOWING DURATIONS:

10
WARRANTY CONT...
FINISHES AND ALL OTHER PARTS AND COMPONENTS
EXCLUDING WOOD – 1 YEAR
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, THEREFORE, THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
DISCLAIMER
NO OTHER EXPRESS WARRANTY HAS BEEN MADE OR WILL BE MADE ON BEHALF OF THE COMPANY, WITH
RESPECT TO THE FURNITURE AND ITS PARTS, OR THE OPERATION, REPAIR, OR REPLACEMENT OF THE
FURNITURE AND ITS PARTS. FURTHERMORE, NO REPRESENTATIVE ON THE BEHALF OF THE COMPANY OR ITS
DISTRIBUTORS OR RETAILERS IS AUTHORIZED TO MAKE ANY CHANGES OR MODIFICATIONS TO THESE LIMITED
WARRANTIES.
SOME RETAILERS MAY OFFER EXTENDED OR ADDITIONAL WARRANTIES, INCLUDING BUT NOT LIMITED TO
EXTENDED OR ADDITIONAL FINISH WARRANTIES, EITHER FROM THE RETAILER OR THROUGH A THIRD-PARTY.
WE SHALL NOT BE LIABLE UNDER ANY EXTENDED OR ADDITIONAL WARRANTIES OFFERED BY ANY RETAILER OR
THROUGH A THIRD-PARTY.
IN NO EVENT SHALL WE BE RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SUCH AS LOSS OF
USE, INCONVENIENCE, LOSS OR DAMAGE TO PERSONAL PROPERTY, WHETHER INDIRECT OR DIRECT, AND
WHETHER ARISING IN CONTRACT OR TORT. IN NO EVENT SHALL THE COMPANY'S RESPONSIBILITY EXCEEDS THE
PURCHASE PRICE OF THE PRODUCT OR ITS REPLACEMENT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
REMEDY AND CLAIMS
Under this Limited Warranty, the company's exclusive obligation during the applicable warranty period is to
repair or replace, at its option, any part or parts found, upon examination by an authorized manufacturer’s
representative, to contain a material manufacturing defect. For all of its products, other than Wood (as stated
in the heading "Finishes of Pipes and Fittings, and all Other Parts and Components, Excluding Wood"), We
will pay, within one year from the date of purchase by the original retail purchaser, reasonable and standard
labor rates to repair or replace the defective parts and shipping costs from the retailer to and from the
company, or a repair center designated by the Customer Service Department at no charge to the original retail
purchaser. After one year from the date of purchase, the original retail purchaser will be responsible for labor,
packing, and all shipping and transportation costs.
If within the warranty period, identical materials are unavailable at the time of repair or replacement, we reserve
the right to substitute materials of equal or better quality. Replacement parts may vary in color from the original
due to aging, ware, and the natural anodizing and flash plating process.
Any item repaired or replaced under this Limited Warranty will be covered by the Limited Warranty for the
remainder of the original warranty period only.

11
WARRANTY CONT...
Claims
If a problem should arise which you feel is covered by our Limited Warranty, contact us. The
original bill of sale and the product serial number are necessary for the fulfillment of the warranty.
Please make sure any claim for warranty service is accompanied by the necessary information to
satisfy the warranty requirements. If necessary, the retailer will contact the company to establish
service. If the problem can be easily corrected, we will authorize the retailer to make those repairs.
We reserve the right to require defective parts be returned to us upon request.
We are not responsible for scheduling or the cost of transporting your furniture from your home
to the retailer or from the retailer to your home. You must make those arrangements with the
retailer. If you or the retailer have moved and you need service, call our Customer Service
number.
Table of contents
Popular Rack & Stand manuals by other brands

TriStar
TriStar DR-1199 quick start guide

Konig & Meyer
Konig & Meyer Wind-Up stand 3000 Translation of the original operating instructions

Wheelock
Wheelock Cooper ET70-24MCC installation instructions

Esoteric
Esoteric AB-T1KD1 owner's manual

Aruba Networks
Aruba Networks AP-105 installation guide

Avonic
Avonic AV-MT250 Series user manual