Avonic AV-MT250 Series User manual

Avonic Ceiling mount
AV-MT250
www.avonic.eu | User Manual | Version 1.0

www.avonic.eu 2
CONTENTS
Introduction............................................................................................................................. 3
Contact .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 3
Join Avonic.................................................................................................... 3
Safety Notes.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 3
Package contents and Accessories...................................................................... 4
Contents .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 4
Product Overview................................................................................................................ 5
Features........................................................................................................ 5
Installation ............................................................................................................................... 6
Measurements and specs............................................................................................ 9

www.avonic.eu 3
• Installation and servicing should only be done by Qualified Service Personnel and conform to all
local codes.
• This unit is designed for indoor use only and it must not be installed where exposed to water or
other liquids and moisture.
• Before powering on the device, check the input power voltage carefully.
• Avoid shock and vibration when transporting and installing the device.
• Electronic devices produce heat. Do not block the ventilation slots of the device and make sure
the installation environment is well ventilated to avoid overheating.
• Before cleaning, unplug the power cable. Use a soft, damp cloth to clean the device, do not use
strong or abrasive detergent to clean that will damage the device.
• If you wish to dispose this product, please contact Avonic to obtain info about the disposal
procedure.
facebook.com/avonicPTZ linkedin.com/company/avonic twitter.com/avonic
For any questions or suggestions, contact your reseller or the local distributor of Avonic. Find the local distri-
butor on the website of Avonic. For the most recent version of the manual or datasheet, look at the Avonic
website: www.avonic.eu
Thank you for your Avonic purchase. Before beginning to operate this device, please read the manual in
order to make sure the best performance is obtained. Save this manual for future reference.
Join Avonic
Safety Notes
Contact
INTRODUCTION
Back to top

www.avonic.eu 4
Quantity Description
1 pc Ceiling mount AV-MT250-B/ -W
1 pc 1/4”-20 UNC Central Camera Screw
5 pc M3*6mm black screw
2 pc Black Allen bolt (back cover)
1 pc Black 30MM Cover Cap
Contents
PACKAGE CONTENTS AND ACCESSORIES
Back to top

5
www.avonic.eu
• Separate base and camera plate for hassle free mounting and cable installation
• Double VESA 75 mounting holes for optimal compatibility with VESA standard mounts
• Hands free installation of the camera, only one screw needed to secure it
• Integrated cable cover
• Discrete and compact design
• Seamless integration with the shape and color of Avonic PTZ cameras
The Avonic MT250 is a solid ceiling mount suitable for the CM40 and CM70 series. Its discrete
design matches the silent operation of Avonic PTZ cameras. The MT-250 is equipped with two
VESA75 mounting possibilities. The double VESA75 holes serve a dual purpose; it ensures optimal
compatibility with standard VESA mounts and it makes finding a suitable ceiling location to
mount the MT-250 easy. When mounted to the ceiling, the clever MT-250 design allows to have
your hands free for easy installation of the camera. Available in black and white to match our
PTZ cameras.
Features
PRODUCT OVERVIEW
Back to top

6
www.avonic.eu
INSTALLATION
The first step in mounting the MT-250 ceiling bracket is to fasten the baseplate to the ceiling (Figure 2.).
For safety reasons, make sure that screws holding the plate are at least capable of supporting 4 times
the weight of the bracket and camera together.
If you choose to mount the camera onto a standard VESA polemount, the baseplate has two VESA75
mounting possibilites (Figure 1.), making it easy to find the best position for the bracket
Figure 2.
*screws and plugs not included
Figure 1.
Back to top

7
www.avonic.eu
The next two drawings describe step two and three
in the process.
The second step in the process is to mount the
camera to its own plate (Figure 3.), using the
supplied 1/4” UNC screw and three little black M3
security screws.
The third step is to connect the cables to the
camera and slide the camera on its plate into place
(Figure 4.). The construction has been designed in
such a way that the camera can be hung up and
be released so the installer has his or her hands
free.
Figure 3.
Figure 4.
Back to top

8
www.avonic.eu
The fourth step is to lock the camera and ceilingmount together using one of the supplied M3 screws
and fasten into the center front (Figure 5.).
Figure 5.
The fifth and last step is to put the cable cover over the back of the bracket, neatly conceiling the cables
and connectors of the camera. The cover cap can be screwed in place using the two supplied M6 Allen
bolts (Figure 6.). Note that the screws of the covercap are placed off-centre, indicating that the cover
can only be mounted in one specific way to match up exactly with the back of the camera.
Figure 6.
Back to top

MEASUREMENTS AND SPECS
Ceiling mount plate with cover for Avonic cameras.
General specifications
Color WHITE OR BLACK
Dimensions product MM (W x H X D) 138 X 69 X 240
Weight product 1.1 KG
Dimensions package MM (W X H X D) 145 X 75 X 250
Weight package 1.2 KG
Included AV-MT250 BLACK OR WHITE
1 X 1/4”-20 UNC CAMERA SCREW
5 X M3*6MM BLACK SCREW
2 X BLACK ALLEN BOLT M6*1.0 (TO HOLD STEEL
BACK COVER)
1 X BLACK 30MM COVER CAP