Furrion Access FAN17B87 User manual

This drawing contains proprietary information and trade secrets of Furrion Property Holding Ltd.
Unauthorized use or copying is prohibited.
METRIC
[INCH]
METRIC [INCH]
CRITICAL DIMENSION
CHECKING IS COMPULSORY
VOLUME cm3
MASS grams REV. DATE MODIFICATIONS NAME ECN NO.
DENSITY g/cm3MATERIAL: Furrion Property Holding Ltd.
GENERAL TOLERANCES
EXCEPT AS NOTED
0 TO 6mm = ±0.1
>6 TO 30mm = ±0.2
>30 TO 80mm = ±0.3
>80 TO 180mm = ±0.4
>180mm = ±0.5
ANGULAR = ± 3°
FINISH SPEC:
COMPOSITE-NO SHEET 1 OF 1
SCALE: DATE: DRAWN BY: APPROVED BY: REVISION:
NAME: PART NO.
Program: Indesign CC
Black
IM for LTE Wi-Fi Router with Swappable SIM Card IM-FAV00072
1.0Karl Fung
Jonathan XX
Lucas Sun10-Dec-18
1.0 18-Sep.-19 NEW
Printing Notes:
Material: 80 GSM Bond Paper or 50# Bond Paper White
Ink: Black
Resolution: 150 DPI or above
Printing method: Offset Printing
Binding: Perfect Bond
Folded size: 105 x 143 mm (H x W)
DO NOT PRINT THIS PAGE

TM
LTE Wi-Fi Router with Swappable SIM Card
Instruction Manual
Manuel d’instructions
Manual de instrucciones
Model/Modèle/Modelo: FAN17B87
FAN17B8F

Thank you for purchasing the Furrion®Wi-Fi Router with Swappable SIM Card. Before
operating your new product, please read these instructions carefully. This will ensure
safe use and reduce the risk of injury. This instruction manual contains information for
installation, maintenance of the product and safe use.
Please keep this instruction manual in a safe place for future reference. Be sure to
pass on this manual to any new owners of this product.
The manufacturer does not accept responsibility for any damages due to not
observing these instructions.
If you have any questions regarding our products, please contact us at:
[email protected]
2
English
Welcome

Welcome..................................................................................................2
About your Product ...............................................................................4
Product Features...................................................................................................................................4
FCC Statements ....................................................................................................................................4
IC Statement............................................................................................................................................5
Product Overview ..................................................................................6
Installation ..............................................................................................8
What’s in the box................................................................................................................................... 8
Slide in the Router ................................................................................................................................ 8
Preparation .............................................................................................9
Material Preparation............................................................................................................................ 9
Furrion Network Service Activation............................................................................................. 9
Optional: Replace Built-in Data Card with Another Activated SIM Card .................... 9
Internet Access through the Router ..................................................11
Power on Your Router ........................................................................................................................11
Connect to the Router for Internet Access...............................................................................11
Connect to Your Router for Wi-Fi Configuration...................................................................12
Log in to the Configuration Interface..........................................................................................12
Quick Setup of your Router.............................................................................................................13
Advance Setting...................................................................................................................................14
Maintenance .........................................................................................15
Power off or Reboot Your LTE Wi-Fi Router...........................................................................15
Reset your Wi-Fi Router ...................................................................................................................15
Specifications ......................................................................................16
Troubleshooting...................................................................................16
3
English
Contents

Furrion LTE Wi-Fi Router supports LTE B2/B4/B5/B12/B13/B14/B66/B71 and
WCDMA B2/B4/B5. Popular operating systems such as Windows, Linux and Mac, and
smart devices like iOS and Android are compatible with this product.
This device is ready for the Furrion network. Once you have installed the device, turn
on the power and after few minutes the router should attach itself to the LTE network
as default. It is as simple as that.
Please read this manual when using Furrion LTE Wi-Fi Router for the first time.
Product Features
●Slide-in Design - Easy Installation
●Furrion Network Ready
●Online Top-up through Furrion APP, Web and call center
●Swappable SIM card supported
●Web/APP for configuration
●Auto detect web login/security check
●WPS supported
●Emergency and roadside assistance support
FCC Statements
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
4
English
About your Product

−Reorient or relocate the receiving antenna.
−Increase the separation between the equipment and receiver.
−Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
−Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102
établies pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
5
English
About your Product

POWER STAT U S
RESETTOP UP
Status Indicator
Reset Button
Power Button
WPS/Status
Button Network Status
LED (Green)
Reset Button
Button/
Indicator Description
Power Button
●In OFF mode, press and hold the POWER button for about 4 seconds to
turn on the device. The Status Indicator LED will be illuminated and then
off.
●In ON mode, press and hold the POWER button for about 4 second to
turn off the device.
WPS/Status
Button
●Press and hold the WPS/STATUS button for 5 seconds to turn on the
WPS function. The default setting is 2.4G Wi-Fi. You can choose 5G Wi-
Fi from the router configuration page.
●Briefly press the WPS/STATUS button to view the network signal
strength. The Signal Indicator LED will be illuminated for about 20
seconds and the number of lit bars indicates the signal strength.
NOTE: You can check the signal strength by turning on the Status LED
via the router configuration page. The Signal Indicator LED will remain
illuminated unless you disable the Status LED option on the router
configuration page.
●Press and hold the WPS/Status button for 5 seconds to turn on the
WPS function. The default setting is 2.4G Wi-Fi.
●Briefly press the WPS/STATUS button to view the network status. The
network status LED will be illuminated for about 20 seconds.
NOTE: You can check the network status by enabling the Status LED
option on the router configuration web page. The network status LED
will be kept illuminated unless you disable the Status LED option.
6
English
Product Overview

Button/
Indicator Description
Reset Button
●Press and hold the RESET button with a pointed object for 10 seconds
to reset the device to factory default settings. All the LEDs blink 3 times,
indicating you have reset the device successfully.
●Briefly press the RESET button with a pointed object to reboot the
device.
Internet
Source Condition Indication
LTE
Account at no
balance/not
activated
●Signal Indicator normal, white LED normal.
●Red LED always ON, until the account is set up
and prepaid.
NOTE: It will remind you when your account
balance is low or empty.
Network ready
●Signal Indicator normal (refer to network signal
strength).
●Green LED ON.
No LTE networks ●Signal Indicator OFF.
●Green LED blinking once per second.
External Wi-Fi
Wi-Fi Network
connected and
Internet ready
●Signal Indicator all ON.
●Green LED OFF.
●Red LED off (even when at no balance).
No valid Wi-Fi
connected or
Internet not ready
●Signal Indicator all ON and blinking once per
second.
●Green LED OFF.
●Red LED OFF (even when at no balance).
7
English
Product Overview

What’s in the box
Make sure you have the following items
included in the packaging. If any item
is damaged or missing, contact your
dealer.
●LTE Wi-Fi Router x 1
●Device Identity Sticker x 1
●Warranty Card x 1
●Instruction Manual x 1
Slide in the Router
This LTE Wi-Fi Router is designed for
using with Furrion rooftop antenna only.
Refer to the separate Furrion outdoor
antenna instruction manual about how to
install it onto the RV rooftop.
NOTE: A Furrion Rooftop Antenna with
mounting bracket (sold separately,
part#FAN73B7C) should already have
been installed on your RV rooftop. If not,
contact your RV dealer or visit
www.furrion.com to purchase it.
2” (50mm) Min.
2” (50mm) Min.
2” (50mm) Min.
7” (178mm) Min.
1. Pull to remove the cover attached
over the existing Ceiling Mount
Bracket. (Fig. 1)
RV Ceiling
Fig. 1
2. Slide the LTE Wi-Fi Router into the
existing Ceiling Mount Bracket.
(Fig. 2)
RV Ceiling
Fig. 2
3. Your LTE Wi-Fi Router is now fully
installed onto the RV ceiling.
8
English
Installation

This device is ready for the Furrion
network. Simply slide the device into the
ceiling mount bracket. For first time use,
you are required to activate the Furrion
Network Service online, which allows
you to access the best LTE network
coverage in North America.
Material Preparation
The device’s ICCID and IMEI numbers
can be found on the warranty card, the
device identity sticker or the rating label.
Before activating your device, make sure
you have one of the materials prepared
for the activation.
Furrion Network Service
Activation
There are 3 methods for you to activate
the device.
●Method 1 - Use your computer or
a smart device, such as a smart
phone, tablet,etc. to visit access.
furrion.com. You can also scan the
QR code on the label of the device.
The online instructions will guide you
to complete the activation process.
●Method 2 - Call Furrion Customer
Service hotline for support.
Please have the Warranty Card of the
device or the Device Identity Sticker
included in the package on hand.
●Method 3 - Through the Furrion
Access for activation.
NOTE: You are required to have
access to the Internet via an external
Wi-Fi network. Otherwise, please use
either Method 1 or Method 2.
Follow the “Device Configuration”
section for activation information.
Optional: Replace Built-in
Data Card with Another
Activated SIM Card
You can use your own SIM card for
Internet access (e.g., when the built-in
data card is out of balance).
1. Slide the SIM card holder towards the
indicated direction to unlock it, then
lift up the holder.
OPEN
Preparation
9
English

Preparation
2. Take out the original SIM card. Place
another activated SIM card on the
tray, with the notch end correctly
oriented and the metal contacts
facing down.
SIM
3. Put down and lock the SIM card
holder securely.
LOCK
10
English

Power on Your Router
Turn on the power connected to the
Ceiling Mount Bracket.
The LTE Wi-Fi Router will be turned on
automatically upon receiving power.
NOTE: You may log in to the LTE Wi-Fi
Router and disable the auto power-on
feature through the configuration
interface. The default setting is Enabled.
If the LTE Wi-Fi Router is turned off,
press and hold the POWER button on
the top for about 4 seconds to turn it on.
Connect to the Router for
Internet Access
Your LTE Wi-Fi Router supports auto-
switch between 4G LTE and External
Wi-Fi.
When the Furrion Network Service in
the built-in data card is activated or you
have replaced it with another activated
SIM card, you can connect your smart
devices or computer to the LTE Wi-
Fi Router for Internet access directly.
See ‘Router Configuration - Change
Wireless Settings‘ for how to rename
the SSID of the LTE Wi-Fi Router.
For Internet access through an
external Wi-Fi network, see ‘Router
Configuration - Connect to an
External Wi-Fi Network‘ for how to
configure your LTE Wi-Fi Router.
Connect to the Router
Wirelessly
1. Scan for wireless networks on your
mobile device or laptop. It may take
a few minutes for the network to
appear.
2. Find the SSID you set for the Wi-
FiRouter, for example, MyFurrion
Router.
3. Confirm for connection to the LTE
Wi-Fi Router.
−Now you can access to the
Internet through the LTE Wi-Fi
Router.
Connect to the Router through
LAN Connection
For Internet access, you can also connect
your device (such as a laptop or smart
TV) to the LAN socket available on the
Ceiling Mount Bracket.
11
English
Internet Access through the Router

Connect to Your Router for
Wi-Fi Configuration
4. Scan for wireless networks on your
mobile device or laptop. It may take
a few minutes for the network to
appear.
5. Select Local Wi-Fi network with
SSID: FURRIONAP_xxxxxx
Password: FAxxxxxx
The “xxxxxx” in the example above
corresponds to the last 6 characters
of the unique network ID address. The
default password can be found on the
SSID/WPA sticker.
6. Confirm and join the network.
Log in to the Configuration
Interface
The default IP of this LTE Wi-Fi Router is
192.168.0.1 with subnet 255.255.255.0.
Make sure the smart device or
computer attached to this router is in
the same subnet and has an IP address
in the range between 192.168.0.2 ~
192.168.0.254.
1. Launch a web browser and enter
192.168.0.1 in the address bar, then
the login window will pop up.
2. Enter the default user name: admin
and password: admin.
Username:
Password:
Login Cancel
3. Click Login.
System Icon Definition
Reboot the system.
Click to logout of the system.
Click for quick setup of your
system.
Indicates the signal
strength.
12
English
Router Configuration

Quick Setup of your Router
Change Administration Password
After successful login, the following
screen will appear and you will be required
to setup a new password for the “admin”
account for device management.
Username: Show the current user name.
New Password: You can enter
1-32characters as your new password.
Confirm Password: Enter the new
password again.
Click Next to go on to the next step.
Connect to an External Wi-Fi
Network
On the popup screen, select Ext Wifi for
access to Furrion network activation.
LTE: For Internet service through the
LTE network.
Ext Wifi: For Internet service through
the public Wi-Fi network.
After selection of Ext Wifi, you can
select an available AP (Access Point) for
Internet access.
Click SCAN to scan available APs and
the following window will appear:
Choose the AP you want to connect from
the pop-up window and click Apply to
apply the network settings.
AP SSID: The SSID of the scanned and
applied AP will appear here. You can also
enter an available network SSID here
directly.
Password: Enter the password of the
selected AP.
After entering the password for the
selected AP, click Next to go on to the
next step.
13
English
Router Configuration

14
English
Router Configuration
Change Wireless Settings
A new window will pop up, where you can
change wireless settings.
Network Name (SSID): Rename the
SSID of the LTE Wi-Fi Router. For
example, rename it to My Furrion
Router.
NOTE: Make sure that your SSID
is unique if there are other wireless
networks operating in your area.
Security Mode: Select a security mode:
No Encryption, WPA-PSK, WPA2-PSK,
or WPA-PSK/WPA2-PSK.
WPA Algorithms: TKIP or AES.
Password: Set the password for Internet
access through the LTE Wi-Fi Router.
Click Next to go on to the next step.
Confirm Your Settings
In the pop-up window, click “Finish” to
save and finish the quick setup.
You should now be able to access the
Internet after the LTE Wi-Fi Router
configuration is finished.
Advance Setting
Click Advance Setting to activate the
advance setting page, where you can
configure advanced settings of WAN,
LAN, Wi-Fi, Firewall etc.

Power off or Reboot Your
LTE Wi-Fi Router
Note: Be careful the LTE Wi-Fi Router
might be hot after operating for a long
time.
You can power off or reboot it when
necessary.
To power off:
●Press and hold the POWER button on
top of the LTE Wi-Fi Router for about
4seconds.
The Network Status LED will flash
and then turn off.
POWER STAT US
RESETTOP UP
NOTE: It is recommended to wait
30seconds before turning on the
Wi-FiRouter after it is powered off.
To reboot:
●Log in to the configuration interface
(see “Login” section about how to log
in), then click the button.
●Or briefly press the RESET button
with a pointed object.
Reset your Wi-Fi Router
To restore the LTE Wi-Fi Router to
factory default settings, press and hold
the RESET button using a pointed object
for about 10 seconds then release.
The LED will flash 3 times then disappear.
POWER STAT US
RESETTOP UP
15
English
Maintenance

Technical Specifiations
OPERATING CONDITIONS
POWER RATING 9~16 Vdc
CURRENT CONSUMPTION Typical: 12Vdc @ 500mA, Max. 1A
OPERATION TEMPERATURE -20°C to 55°C / -4°F to 131°F
RF SPECIFICATIONS
FREQUENCY RANGE
2412MHz to 2462MHz/2422MHz to 2452MHz
5180MHz to 5240MHz/5190MHz to 5230MHz/ 5210MHz
5475MHz to 5825MHz/5755MHz to 5795MHz/ 5775MHz
SUPPORTED SYSTEM 802.11a/b/g/n/ac
SERURITY CODE WEP, WPA, WPA2, WPA mixed
SUPPORTED BAND LTE: B2/B4/B5/B12/B13/B14/B66/B71
WCDMA: B2/B4/B5
TX POWER WI-FI (WAN / LAN)
2.4G WiFi: 20.11dBm (Max.)
5G WiFi: 15.51dBm (Max.)
LTE: 25dBm (Max.)
BANDWIDTH HT20/HT40/HT80
WIRELESS RANGE >400ft with 10Mbps throughput (open field)
ANTENNA GAIN Max 4dBi
INTERFACE
ETHERNET PORT 2 x 10/100/1000mbps RJ-45
1. None of the LEDs are on when you turn on the router
Make sure you have power to the Ceiling Mount Bracket.
Check the connection between the Ceiling Mount Bracket and the LTE Wi-Fi Router. If the
error persists, you may have a hardware problem. In this case you should contact technical
support.
2. You have forgotten your router login and/or password
Try the default login and password, found in the “Login” section. If this fails, you can restore
your router to its factory settings by pressing and holding the Resetbutton on top of your
router with a pointed object for 10 seconds or more. You will be able to use the default login
and password after the factory reset.
3. No access to the Internet
Check the external network access status and Wi-Fi connection. Alternatively, your Furrion
Network Service account may have insufficient data balance.
16
English
Specifications
Troubleshooting

IM-FAV00072 V1.0
Furrion Innovation Center & Institute of Technology
• 52567 Independence Ct., Elkhart, IN 46514, USA • Toll free:1-888-354-5792
• Email: [email protected]
©2007-2019 Furrion Ltd. Furrion®and the Furrion logo are trademarks licensed for use by
Furrion Ltd. and registered in the U.S. and other countries.
©2007-2019 Furrion Ltd. Furrion®et le logo Furrion sont des marques déposées par FurrionLtd.
et enregistrées aux Etats-Unis et ailleurs.
©2007-2019 Furrion Ltd. Furrion®y el logotipo de Furrion y son marcas comerciales con
licencia de uso de Furrion Ltd. y están registradas en los Estados Unidos y en otros países.
FURRION.COM