Galaxy Audio Any Spot ANT-DISTDC User manual

ANT-DISTDC
MAKERS OF THE ORIGINAL
HOT SPOT PERSONAL MONITOR
USER'S GUIDE
WIRELESSSYSTEMS
®
®
ANYSP TO®
AN T-DI ST DC
UHF A NTENN A DIST RIB UTO R
PO WER
12~18
3000mA
OUTPUT4
600mA
OUTPUT3
600mA
OUTPUT2
600mA
OUTPUT1
600mA
DC IN
ANT-1 ANT-2 ANT-3 ANT-4 ANT-5 ANT-6 ANT-7 ANT-8 ANTENNA-A
ANTENNA-B
Antenna Distribution System for
Wireless Microphone Receivers
www.galaxyaudio.com/products/ant-distdc

Systems include:
ANT-DISTDC Antenna Distribution Amplifier
(4) DC Power Cables
(10) BNC Cables
(2) Panel mount BNC feed-through connectors (CN-BNCPM)
Power Supply
User Guide
System Components
System Components
System Components
System Components
®
ANYSP TO®
AN T-DIS TD C
UHF A NTENN A DISTR IBUT OR
POW ER
10 BNC Cables
2 Panel mount
BNC feed-through
connectors
(CN-BNCPM)
4 DC Power Supply Cables
1 Power Supply
1 User Guide
System Description
ANT-DISTDC utilizes a newly developed low noise and amplifier circuit
design. With 8-channels of low loss divider circuitry, four wireless mic
receivers can be used with two antennas. Four DC power outputs are
provided to eliminate the need of individual power supplies for the receivers.
1

®
ANYSPOT
®
AN T-DI ST DC
UHF A NTENN A DIST RIB UTO R
POW ER
12~18
3000mA
OUTPUT4
600mA
OUTPUT3
600mA
OUTPUT2
600mA
OUTPUT1
600mA
DC IN
ANT-1 ANT-2 ANT-3 ANT-4 ANT-5 ANT-6 ANT-7 ANT-8 ANTENNA-A
ANTENNA-B
1
2 3 4 5 3 2
Front Panel
Back Panel
ANT-DISTDC Antenna Distribution Amplifier
ANT-DISTDC Antenna Distribution Amplifier
1. On/Off Switch
2. Antenna Socket
3. Antenna Distribution Connection Sockets
(Carries signals to receivers to increase receiving distance)
4. Power Distribution Connection Sockets
Provides Power Supply to Receivers
5. DC In
2

®
ANYSP TO ®
AN T-DIS TD C
UHF A NTENN A DISTR IBUT OR
POW ER
Shown with optional
CTS WIRELESS
MIC RECEIVERS
POWER
SQL
SET AUTO
iR
DATA SYNC
ADS
POWER
SQL
SET AUTO
iR
DATA SYNC
ADS
1. BNC Cables
4. BNC Antennas
(From wireless system)
5. BNC Connectors
(CN-BNCPM)
Dual System Installation
Dual System Installation
2. Power Supply Cable 3. Power Supply
12~18
3000mA
OUTPUT4
600mA
OUTPUT3
600mA
OUTPUT2
600mA
OUTPUT1
600mA
DC IN
ANT-1 ANT-2 ANT-3 ANT-4 ANT-5 ANT-6 ANT-7 ANT-8 ANTENNA-A
ANTENNA-B
D.C 12-18V
500mA
BALANCED
OUTPUT
UNBALANCED
OUTPUT ANTENNA-B ANTENNA-A
D.C 12-18V
500mA
BALANCED
OUTPUT
UNBALANCED
OUTPUT ANTENNA-B ANTENNA-A
4 4
5
5 5
5
3
1 1 1 2 2 1 11
1. BNC Cables
2. Power Supply Cable
3
Note: Use only with wireless microphone receivers.
Will not work with wireless in-ear systems.

Quad System Installation
Quad System Installation
POWER
SQL
SET AUTO
iR
DATA SYNC
ADS
POWER
SQL
SET AUTO
iR
DATA SYNC
ADS
POWER
SQL
SET AUTO
iR
DATA SYNC
ADS
POWER
SQL
SET AUTO
iR
DATA SYNC
ADS
®
ANYSP TO ®
AN T-DI ST DC
UHF A NTENN A DIST RIB UTO R
POW ER
12~18
3000mA
OUTPUT4
600mA
OUTPUT3
600mA
OUTPUT2
600mA
OUTPUT1
600mA
DC IN
ANT-1 ANT-2 ANT-3 ANT-4 ANT-5 ANT-6 ANT-7 ANT-8 ANTENNA-A
ANTENNA-B
D.C 12-18V
500mA
BALANCED
OUTPUT
UNBALANCED
OUTPUT ANTENNA-B ANTENNA-A
D.C 12-18V
500mA
BALANCED
OUTPUT
UNBALANCED
OUTPUT ANTENNA-B ANTENNA-A
D.C 12-18V
500mA
BALANCED
OUTPUT
UNBALANCED
OUTPUT ANTENNA-B ANTENNA-A
D.C 12-18V
500mA
BALANCED
OUTPUT
UNBALANCED
OUTPUT ANTENNA-B ANTENNA-A
®
ANT-PDL
®
ANT-PDL
1. BNC Cables 2. Power Supply Cable 3. Power Supply
1. BNC Cables
2. Power Supply Cable
Extended range setup using optional directional paddle
antennas and amplifiers.
ANT-PDL
(Optional)
ANT-PDL
(Optional)
ANT-AMPMIC
(Optional) ANT-AMPMIC
(Optional)
1
1
1 11 11 11 1
1
1
3
2 2 2 2
4

Accessories and Replacement Parts
Accessories and Replacement Parts
AS-EXTBNC - BNC Connector and Cable for front mounting the
antennas on the wireless mic and in-ear systems.
Many of these parts and accessories may be found and purchased from the Galaxy Audio
website in either the Galaxy Store ( ) https://www.galaxyaudio.com/parts-and-accessories
or in the accessories tab of each products web page.
AS-ANTBNC - Replacement BNC Antenna for use with Galaxy Audio
Wireless Personal Monitors and Wireless Microphones.
ANT-AMPMIC - Antenna Amplifier utilizes phantom power and a low
noise design which covers all UHF frequency points from 500mHz to
900mHz. Metal construction, requires phantom power (9VDC), 50
ohm input/output impedance.
ANT-PDL - Directional antenna used to decrease interference to
other equipment. Frequency range 500-900MHz The UHF wide-band
(500-900 MHZ) directional LPDA (log periodic dipole array) antenna
reduces outside interference while providing increased send/receive
signal range. Each antenna paddle is matched to 50 ohms
impedance with a low-loss BNC connector; 7dBi gain. For permanent
or temporary installation; mounts to 5/8"-27 threads.
PS-13.5-.35.5 - Replacement Power Supply for AS-900, AS-1100,
AS-1500, VES, VSC, ECD, ECM, PSE, TRC & DHT.
AS-UA12-14.5 - Universal Power Supply for Replacement Power
Supply for AS-900, AS-1100, AS-1500, VES, VSC, ECD, ECM, PSE,
TRC, DHT, DHTQUAD, & CTS. Includes adapters for most other
countries.
5

Please visit for the latest updatesgalaxyaudio.com
FCC Consumer Alert for Wireless Microphones (U.S.)
Most users do not need a license to operate this wireless microphone system.
Nevertheless, operating this microphone system without a license is subject to certain
restrictions: the system may not cause harmful interference; it must operate at a low
power level (not in excess of 50 milliwatts); and it has no protection from interference
received from any other device. Purchasers should also be aware that the FCC is
currently evaluating use of wireless microphone systems, and these rules are subject to
change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit
the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
ANT-DISTDC Antenna Distribution Amplifier
SPECIFICATIONS
SPECIFICATIONS
Input Impedance: 50 ohm
Output Impedance: 50 ohm
Antenna Input Socket: BNC
Antenna Output Socket: BNC
Gain: 3dB
Frequency Bandwidth: 200mHz
Power Supply: DC 12-18V 3000mA
Weight: 4.4 lbs. (2kg)
Dimension: 1.8" x 16.14" x 6.3" (45mm x 410mm x 160mm)
6

1-800-369-7768 www.galaxyaudio.com
V20180914
Printed in China
© Copyright Galaxy Audio 2018
WARRANTY Information can be viewed online at
https://www.galaxyaudio.com/support/warranty
THREE YEAR LIMITED WARRANTY
USER'S GUIDE
ANT-DISTDC
Specifications in this manual are subject to change without notice.
For the most up to date manual and information
visit www.galaxyaudio.com.
www.galaxyaudio.com/support/warranty
Table of contents
Other Galaxy Audio Amplifier manuals