Garmin GTU 10 User manual



GPS LOCATOR

© 2010–2011 Garmin Ltd. or its subsidiaries
All rights reserved. Except as expressly provided
herein, no part of this manual may be reproduced,
copied, transmitted, disseminated, downloaded
or stored in any storage medium, for any purpose
without the express prior written consent of
Garmin. Garmin hereby grants permission to
download a single copy of this manual onto a
hard drive or other electronic storage medium to
be viewed and to print one copy of this manual
or of any revision hereto, provided that such
electronic or printed copy of this manual must
contain the complete text of this copyright notice
and provided further that any unauthorized
commercial distribution of this manual or any
revision hereto is strictly prohibited.
Information in this document is subject to change
without notice. Garmin reserves the right to
change or improve its products and to make
changes in the content without obligation to notify
any person or organization of such changes or
improvements.
Visit the Garmin Web site (www.garmin.com)
for current updates and supplemental information
concerning the use and operation of this and other
Garmin products.
Garmin
®
and the Garmin logo are trademarks of
Garmin Ltd. or its subsidiaries, registered in the
USA and other countries. GTU
™
10 is a trademark
of Garmin Ltd. or its subsidiaries.
Android
™
is a trademark of Google, Inc. These
trademarks may not be used without the express
permission of Garmin.
iPhone
®
is a trademark of Apple Inc., registered in
the U.S. and other countries.

GTU 10 Owner’s Manual 1

‹ 
See the Important Safety and
Product Information guide in the
product box for product warnings
and other important information.
notice
It is your responsibility to ensure
that your use of this device complies
with applicable laws in your area.
Some jurisdictions have laws or
regulations concerning the use of
location tracking devices. Garmin is
not responsible for your use of this
device in violation of any such laws
or regulations.
When using the device the rst time,
complete these tasks.
1. Connect the device to the
computer (page 2).
2. Register and activate your device
(page 2).
3. Charge the device (page 2).
4. Track the device (page 4).
5. Congure the device (page 5).
6. Check the device status (page 6).
7. Attach the device (pages 7–8).

2 GTU 10 Owner’s Manual


notice
To prevent corrosion, thoroughly dry
the contacts and the surrounding area
before charging or connecting to a
computer.
Before you can use your device, you
must register and activate it on your
computer.
1. Plug the cable into the USB port
on your computer.
2. Plug the mini-USB end of the
cable into the mini-USB port ➊
on the device.
➊
The LED turns on when the device is
connected to the computer.


1. Go to http://my.garmin.com.
2. Select  > 
.
3. Follow the on-screen instructions
to set up an account and register
your device.

notice
The device will not charge when the
battery is outside the temperature
range from 32°F to 113°F (0°C to
45°C).
In order to charge the device, it must
be connected to your computer
(page 2) or a Garmin charging
accessory.

GTU 10 Owner’s Manual 3
• Charge the device completely.
The LED is red while the device
is charging. When it is fully
charged, the LED turns green.
This can take up to 2 hours.
• Disconnect the device when the
LED turns green.
• Go to http://buy.garmin.com to
buy additional charging cables.

You can set tracking settings at
http://my.garmin.com. From here
you can locate the device on a
map, create geofences, and manage
notications.
Some device tracking options are
only available to Deluxe Tracking
service plan subscribers. Go to
http://my.garmin.com for more
information on service plans.
See page 10 to see how device
tracking settings affect battery life.

You can view the location of your
device on a map using the tracking
application.

Scheduled check-ins are available for
Deluxe Tracking plan subscribers.
You can schedule a specic time
to view the location of the device.
At the scheduled time, you are sent
a text message or email with the
device location and which geofence
the device is within (if applicable).

Continuous tracking is available for
Deluxe Tracking plan subscribers.
Continuous tracking enables
the device to report its location
at 15-second intervals. You can
schedule continuous tracking to
begin and end at specic times.

4 GTU 10 Owner’s Manual
When you schedule a session, you
can invite others to view the device
tracks during that session only if
you will be the device holder for the
complete duration of the scheduled
session.

A geofence is a virtual boundary that
you can create. You are alerted when
the device enters or exits a geofence.
You can set up to 10 geofences. The
virtual boundaries of your geofences
are accurate up to approximately 5
meters.
If your phone can receive text
messages, you can set up text
message alerts. You can also set up
email notications.
: The number of text
messages you are able to receive
will vary according to your country
and your subscription plan. Go to
http://my.garmin.com for more
information.

Track history is a log of where your
device has traveled. The detail level
of your track history depends on
your service plan and the tracking
method you choose.
Deluxe Tracking plan subscribers
can see all location points sent by
the device, whether the points are
from location requests, scheduled
check-ins, or device alerts. The
Deluxe Tracking plan records the
device location at regular intervals,
depending on the battery use setting
(page 10).
Standard plan subscribers can see the
last ten location points, whether the
points are from location requests or
device alerts.

GTU 10 Owner’s Manual 5
You can clear the track history from
http://my.garmin.com or your mobile
device.

notice
The device cannot send alerts when
the battery is dead.

You can set the level at which the
device sends a low power alert, and
you can add a second, critically low
power alert.
The default battery alert sends a low
power notication when the battery
life drops below 20%.

When you have a geofence set up,
you can set the device to send an
alert when there is poor GPS signal
reception.

You can set the device to send an
alert when it is turned off by the
power button on the device.

You can set the device to send an
alert when it is disconnected from an
external power source.

Speed alerts are available for Deluxe
Tracking plan subscribers.
Because speed alerts require the
device to run continuously, speed
alerts require the device to be
connected to an external power
source.
You can set an alert that noties you
when the device exceeds a specied
speed limit.

6 GTU 10 Owner’s Manual


Now is the time to check your device
status. Any time the device is on and
in standby mode, you can check the
status.
1. If necessary, unplug the device.
2. Press , and observe the LED.
 
4 green The device is turned on
and can be located.
2 green The device is turned
on and is inside a
geofence.
1 red and 3
green
Low battery. The
device is on and can
be located.
1 red and 1
green
Low battery. The
device is inside a
geofence.
4 red and 1
long red
Battery is too low for
operation.

To instantly retrieve new tracking
settings, you must turn off the
device.
Hold for 3 seconds.
The LED turns red. When the
LED turns off, the device is off.

1. Go outside where you have an
unobstructed view of the sky.
2. Hold for 3 seconds.
The LED ashes green while the
device is connecting to the network.
The LED turns off when the device
enters standby mode and is ready
to use.

GTU 10 Owner’s Manual 7


: This device should be
used only with the provided case.
For optimal performance, keep the
device facing up when mounted.
1. Remove the collar from your pet.
2. Turn on the device (page 6).
3. Place the device in the case.
4. Place the collar on top of the
nubs ➊ .
➊
➋
5. Place the case strap ➋ over the
collar, and secure it using the
hook and loop fastener.
6. Attach the collar to your pet.


: This accessory may not be
included with your device.
You can use the carabiner clip to
attach the device to an object like a
backpack.
: Do not use the carabiner clip
to attach the device to your pet.
1. Place the device in the case.
2. Attach the carabiner clip to the
loop on the case.
3. Attach the carabiner clip to the
object you want to track.

8 GTU 10 Owner’s Manual



: This accessory may not be
included with your device.
You can use the adhesive mount to
attach the device to an object. The
case is not needed when using the
adhesive mount.
1. Clean the area where you intend
to attach the adhesive mount.
: For optimal performance,
ensure that you have a clear view
of the sky. Do not mount the
device near metal surfaces.
2. Attach one side of the adhesive
mount to the back of the device
➊ .
➊
➋
3. Attach the other side of the
adhesive mount to the object ➋
you want to track.
4. Connect the two sides of the hook
and loop fasteners.

: Text message notications
do not require a smartphone or the
mobile application.