GAS PRO64K User manual

PRO64K

Thank you for purchasing this GAS speaker system. It is a state-of-the
art product carefully designed and manufactured for vehicle use. It has
been thoroughly tested to ensure consistent and reliable performance.
If you have any question about the installation or operation of your GAS
speaker system which are not answered by this manual, contact your local
GAS dealer.
These are the tools required to complete the basic installation of
this GAS speaker system. Additional tools are necessary for
more custom work.

WIRING INSTRUCTIONS
Amplifier
+
-
+
-
Tweeter Woofer

Ø73
84mm 10mm
Ø98
2. Use mounting template for the tweeters,
mark the correct mounting location
with a pencil.
3. Before cutting the hole be sure that you
have enough clearance for the tweeter
housing depth.
4. Assemble the tweeters as per the drawing
to the left. Be sure to connect the wires
before placing the tweeter into the flush
mounting hole.
1. Choose proper installation place for
the tweeters.

INSTALLATION OF MIDWOOFER
1. Use mounting template for the
midwoofers, mark the correct
mounting location with a pencil.
6. Insert the speaker and attach the
speaker with the mounting screws.
4. Place the grill frame around the
mounting hole in the panel.
screws.
5
7

TEMPLATE FOR MIDWOOFER
Cutout
Ø142