Denver BPS-451 User manual

BPS-451
denver.eu
2022

Safety information
Please read the safety instructions carefully before using the product for
the first time and keep the instructions for future reference.
1. This product is not a toy. Keep it out of the reach of children.
2. Warning: This product includes a rechargeable lithium ion battery.
3. Keep product out of the reach of children and pets to avoid chewing
and swallowing.
4. Product operating and storage temperature is from 0 degrees
Celsius to 40 degrees Celsius. Environments under and above this
temperature might affect functionality.
5. Never open the product. Do not touch the inside electronics, or you
may get an electric shock. Repair or service are only to be performed
by qualified personnel.
6. Do not expose the device to heat, water, dust (dusty environment),
moisture, direct sunlight!
7. Please protect your ears against loud volumes. Loud volumes can
damage your ears and lead to hearing loss.
8. Bluetooth wireless technology can only operate within a range of
about 10 m (30 ft). The maximum communication distance may vary
depending on the presence of obstacles (people, metal objects, walls,
etc.) or the electromagnetic environment.

9. Microwaves emitted by a Bluetooth device may affect the operation
of electronic medical devices.
10. The unit is not waterproof. If water or foreign objects enter the unit, it
may result in fire or electric shock. If water or a foreign object enters
the unit, stop using it immediately.
11. Do not block the ventilation openings. The product needs them to
disperse heat.
BUILT-IN BT FUNCTION
•Press MODE button to choose the input signal source as BT
(Bluetooth) channel when starting the machine.
•Please ensure the BT device (e.g., a mobile phone) you want to
connect is turned on. Activate the Bluetooth feature on your BT
device so that it scans for the speaker. Then select the BPS-451
speaker to connect. When the connection is successful, a "tick"
tone will prompt. If the connection failed, please restart the
speaker or the device and try again.
•After the speaker and the BT device are successfully connected,
you can play music from your device. To ensure the continuous
stability of the music signal, please try to keep the BT device
and the speaker facing one another.
•The distance between the BT devices and the speaker can be
up to 10 meters if there are no barriers.

BUILT-IN TWS FUNCTION
•Power on the first BPS-451 speaker and connect it to a
Bluetooth device.
•Power on the second BPS-451 speaker and set the mode
to Bluetooth (Do not pair any devices).
•Simultaneously press and hold the PAUSE/PLAY TWS
button of both speakers, you will see “TWS-ON” in the LED
display.
•Play audio from your Bluetooth device. The audio will be
transmitted through both speakers.
FRONT PANEL FUNCTIONS

1. DC 9V1A CHARGE Connect 9V 1A adapter to power source to charge the
battery. You can use the speaker while charging.
2. USB INPUT Insert USB stick for MP3 playback.
3. MicroSD PORT Insert a microSD card for MP3 playback.
4. LINE INPUT Connect external playback device with AUX cable.
5. MIC INPUT Connect the included microphone.
6. MENU Press this button to adjust the bass/treble/echo.
7. REC Press this button to record the signal from the USB flash drive,
TF card or Bluetooth input.
8. MODE/MIC PRI Press to change Mode (Bluetooth, Aux, USB/microSD).
Press and hold to delete USB recording.
9. POWER SWITCH Press to turn on speaker, press and hold to turn off
speaker.
10.VOLUME Adjust the speaker’s volume.
11.LED SWITCH Press to turn LED Party Lighting on/off, press and hold to
change the LED light effect.
12.NEXT Next song.
13.PAUSE/PLAY TWS Press this button to pause the signal from the
USB flash drive, TF card or Bluetooth input. Press and hold this
button to turn on TWS (True Wireless Stereo) mode.
14.PREV Previous song.
Warning!
⚫Lithium battery inside!
⚫Do not open the product!
⚫Do not expose to heat, water, moisture or direct sunlight!
⚫Only charge with the original charger supplied with this product!

1. DO NOT place objects on top of the device, as objects may
scratch the device.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT insert any foreign objects into the device.
4. DO NOT expose the device to strong magnetic or electric fields.
5. DO NOT use the device in the rain.
6. Please check with your Local Authority or retailer about the
proper disposal of electronic products.
7. DO NOT disassemble the device. Only a certified service
technician could perform a repair.

Warning: Lithium batteries inside
8. The device has apertures to disperse heat. DO NOT
block the device’s ventilation, otherwise the device may
become hot and malfunction as a result.
Illegal operations may cause personal injuries or fatal
accidents. Illegal operations may cause damage to
properties.

Please notice - All products are subject to change without
any notice. We take reservations for errors and omissions
in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to
your health and the environment, if the waste material (discarded
electric and electronic equipment and batteries) is not handled
correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen above. This symbol signifies
that electric and electronic equipment and batteries should not be
disposed of with other household waste, but should be disposed of
separately.

As the end user it is important that you submit your used batteries
to the appropriate and designated facility. In this manner you make
sure that the batteries are recycled in accordance with legislature
and will not harm the environment.
All cities have established collection points, where electric and
electronic equipment and batteries can either be submitted free of
charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available at
the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type
BPS-451 is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following
internet address:
www.denver.eu and then click the search ICON on topline of
website. Write model number: BPS-451. Now enter product page,
and RED directive is found under downloads/other downloads.
Bluetooth: 2400 MHz-2500 MHz
Max Output Power: 2 x 20 W
DENVER A/S
Omega 5A,Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu