GECKO BRICKS Ghost & Phantom II User manual

Wall Mount Instructions
Ghost & Phantom II –(75357)
Kit contents
•1x Left arm
•1x Right arm
•1x Back stretcher
•1x Front Stretcher
•1x Minifigure mount
•1x Minifigure mount lug
•1x Adaptor position part
•1x Wall plug (6x30mm)
•1x Wall screw (4.5x50mm)
•2x Small Command strip

Wall Mount Instructions
Ghost & Phantom II –(75357)
Remove the shown Lego assembly from the
official display stand.
With the adaptor assembly seated in the
Lego push the 4 Techinc pins from the
Lego set to secure the adaptor in place.

Wall Mount Instructions
Ghost & Phantom II –(75357)
Then slide the mount over the lug once the 3M command strip has had 8
hours to fully adhere to the wall.
You can rotate the set to 8 positions and slide into the
mount.
Minifigure wall mount
Use the included 3M command strip to fix the
minifgure mount lug to the wall.