TEXONIC Slim-Tilt LX400 User manual

Instruction Manual
Slim-Tilt
TV WALL MOUNT
trusted excellence
max
30kgs/66lbs
32”-55” Max 400X400
LX400

STEP-1
STEP-2a
Note: please read the instructions carefully before installation!
Step 1:
Use the wall plate as a template to
drill four holes of dia. 8mm and
50mm depth in the wall. Then wedge
four plastic anchors into the holes.
Step 2a:
Install the wall plate. Put the wall
plate on the wall, and then screw
four self-tap screws into each plastic
anchor through metal washer to fix
the wall plate onto the wall.
LX400 INSTALLATION INSTRUCTION
B
A
B
WALL
Step 4:
Hanging the TV onto the wall
plate, relax the hands until they
are caught hold of.
STEP-4
WALL
TV
-10°
Step 5:
There is a pull-rope on each monitor bracket.
Push the two monitor bracket together with the
panel TV toward the wall at the same time,
confirm is locked.Pull down the pull-rope
when take down the TV.
STEP-5
WALL
TV
-10°
STEP-3
Step 3:
Install the bracket rail onto the back of
the TV. Select suitable screws from the
screw package according to the size of
the holes in the back of TV. Fix the two
hanging arms onto the back of TV by
screws into the holes.Make sure equal
height of the two hanging arms.
TV
E/F/G
C
D
STEP-2b
Step 2b:
Install the wall panels. Place the wall panel
on the wall, and then screw the four
self-tapping screws into the wall with metal
washers to fix the wall panel to the wall.
A
50mm
2.4
4.5mm
(C) Square Washer (4)
(D) 15mm Plastic Sleeve (4)
(E) M6x30 screws (4)
(F) M8x30 screws (4)
(G) M8x50 screws (4)
(A) M6x50 Self-tap Screw (4) (B) 8x40 Plastic Anchor (4)
(H) Bubble Level (1)
THANK YOU for choosing TEXONIC.
www.texonic.ca
We hope that you are happy with your purchase.
if you enjoy our service & product, please leave us a review.
Much appreciated!