Gemtek WMTB-158N_MHL User manual

- 1 -

- 2 -
(WMTB-158N_MHL)
(WMTB-158N)

- 3 -
Preparation
1. WMTB-158N_MHL: Plug WMTB-158N_MHL into the MHL port of your display
(TV, Monitor, or Projector), WMTB-158N_MHL will turn on automatically; it takes less than 30 seconds
until the standby screen shown on display.
2. WMTB-158N: Plug WMTB-158N into the HDMI port of your display
(TV, Monitor, or Projector), plug in the Micro-USB male connector to the Micro-USB port of
WMTB-158N, then plug in the other side of USB cable into AC adapter or USB port of PC, make
sure the USB port can support [email protected] power supply; it takes less than 30 seconds until the standby
screen shown on display.

- 4 -

- 5 -

- 6 -
GEM
GEM
GEM

- 7 -

- 8 -
-
-
-