Genie RF200AHD User manual
RF200AHD
User Manual
RF200AHD(
2
Index………………………………………………………….........................2
Main Features………………………………………………………………...3
General Description…………………………………………………………..4
Hardware Layout…………………………………………………………..…5
Specifications………………………………………………………………...6
RF200AHD(
3
Main Features
•5.8GHz
•IP65 Rated
•7 RF Channels
•150 meter range (Line of site)
•Plug and Play Installation
•9V – 24V AC / DC Operation
•4 Channel signal strength meter (RSSI)
•Low cost and easy to install solution compared to IP systems.
•Supports AHD-M (720P 1.3Mp), AHD-L(960H), CVBS (PAL & NTSC)
RF200AHD(
4
General Description
The RF200-AHD is a 720P HD high quality wireless video link offering a superior
picture quality compared to existing analogue video. The RF200-AHD supports the
following AHD formats AHD-M (720P 1.3Mp), AHD-L (960H) and is also backward
compatible with CVBS analogue video.
Designed for the CCTV industry the RF200-AHD is an easy to install, self-contained
unit which operates from 9 to 24V AC/DC, has a built in RSSI signal strength meter,
IP65 rated enclosure and easy to connect rising clamp connectors for both the video
and power connections.
A range of 150 meters (Line of Site) is achievable with the RF200-AHD and the link
signal level is monitored with the built in RSSI signal strength meter. The RF200-
AHD is supplied with 2 high quality wall mount brackets for easy x & y alignment, an
optional pole mount bracket is also available.
Guidance Notes
•These units need line of sight for correct operation.
•When installing please be aware that any other 5.8Ghz devices mounted in
close proximity may interfere and cause lines on the received image.
•Try not to install in locations where large or moving objects may pass through
the fresnal zone.
•Trees or foliage may interfere especially during summer months when leaves
containing water are present.
RF200AHD(
5
Hardware Layout
Tx & Rx Antenna: 6dBi directional patch antenna’s
RSSI: 4 Level Signal Strength Meter.
Video In: Video in connection from camera
Video Out: Video out connection to DVR
Power: 9 – 24V AC / DC power supply
Channel Selection: Sets the RF channel. Channel settings are as follows:
Channel DIP1 DIP2 DIP3
1 On On On
2 Off On On
3 On Off On
4 Off Off On
5 On On Off
6 Off On Off
7 On Off Off
Receiver
Video Output
TX Antenna
RSSI
Signal Strength
Channel Selection
Power
0V
Video Input
Transmitter
RX Antenna
Power
Channel Selection
RF200AHD(
6
Specifications
Electrical
Operating Voltage
9V – 24V AC / DC
Tx Operating Current
110mA Max @ 12V
Rx Operating Current
200mA Max @ 12V
Temperature
-10 ~ +55 Degrees
Humidity
90% Non-Condensing
Radio
Channel 1
5.740 GHz
Channel 2
5.760 GHz
Channel 3
5.780 GHz
Channel 4
5.800 GHz
Channel 5
5.820 GHz
Channel 6
5.840 GHz
Channel 7
Transmit Power
Rx Sensitivity
Modulation
Transmission Range
5.860 GHz
<= 14dBm
-85 ~ -10dBm
FM - FM
150 Meters (LOS)
Approvals
EN300-440
EN301-489
Mechanical
Case Rating
IP65
Case Size (With Grommet)
115 x 65 x 40mm
GENIE CCTV LTD.
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT
Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543
www.geniecctv.com
Edition. Feb 2017
Table of contents
