GeoCue TRUEVIEW IF1200A User manual

GeoCue
8/16/2023
Version 1.0
Payload Adapter Installation
Guide for the IF1200A

1 Payload Adapter Installation Guide for the IF1200A8/16/2023
TABLE OF CONTENTS
Payload Adapter Installation Items..........................................................................................................2
IF1200A Third Party Integration..............................................................................................................4
IF1200A Third Party Integration: Payload Adapter..............................................................................4
IF1200A Third Party Integration: AV18 Antenna Mast Installation.......................................................6
Disposal ..................................................................................................................................................9
Support...................................................................................................................................................9
Table of Tables...................................................................................................................................... 10
Table of Figures .................................................................................................................................... 10

2 Payload Adapter Installation Guide for the IF1200A8/16/2023
PAYLOAD ADAPTER INSTALLATION ITEMS
Item
number
Part Name
Article Number
Quantity
1 IF1200A Antenna mount n/a 1
2
AV18 antenna (not included) *
ANT1000705A00T
1
3
VAR6 Front-latch tube mount assembly
ASY1001068A01N
1
4
M3x8 mm flat head screws
HDW1001301A00N
4
5 3ft Cable Right Angle SMB Jack to Right Angle SMA Jack
(not pictured)
CAB1000799A00T
1
6 Loctite Threadlocker Blue 243 (not pictured) MIS1000254A00N 1
*AV18 antenna is not included in this kit and should be included in your payload kit.
Table 1. List of payload adapter installation items.

3 Payload Adapter Installation Guide for the IF1200A8/16/2023
Figure 1. Payload adapter installation items.

4 Payload Adapter Installation Guide for the IF1200A8/16/2023
IF1200A Third Party Integration
IF1200A Third Party Integration: Payload Adapter
1. Position the Payload Adapter so the XYZ coordinate axis symbol of the Payload Adapter is
facing the front of the IF1200A.
Figure 2. Position payload adapter.
2. Unscrew the four (4) Gremzy 12mm tube mount clamps so they are in the open position.

5 Payload Adapter Installation Guide for the IF1200A8/16/2023
Figure 3. Unscrew tube mount clamps to open position.
3. Install the payload adapter onto the IF1200A and tighten the four (4) Gremzy 12mm tube
mount clamps loosely so the payload adapter can slide to adjust into position.
Figure 4. Slide payload adapter into position.
4. Make sure the orientation of the main plate is correct. See step 1.
5. Position the payload adapter so the front two payload adapter-side tube mount clamps are
coincident Make sure the antenna cable properly exits the case.

6 Payload Adapter Installation Guide for the IF1200A8/16/2023
IF1200A Third Party Integration: AV18 Antenna Mast Installation
1. Position the antenna assembly so the antenna cable is exiting towards the port side of the
IF1200A drone.
2. Using two (2) M3x 8mm flat head screws tighten the antenna assembly to the IF1200A drone
body.
Figure 5. AV18 antenna mast assembly.
3. To route the antenna cable, run the cable from the payload adapter to the antenna following
the detailed route shown below.

7 Payload Adapter Installation Guide for the IF1200A8/16/2023
Figure 6. Antenna cable routing.
4. Attach the cable using zip-ties along the route of the cable, as follows:
Figure 7. Attach the cable using zip-ties.

8 Payload Adapter Installation Guide for the IF1200A8/16/2023
5. Install and tighten the AV18 antenna to the antenna mount assembly.
Figure 8. Install and tighten the AV18 antenna to the mount assembly.

9 Payload Adapter Installation Guide for the IF1200A8/16/2023
DISPOSAL
Do not put batteries or other electrical equipment into general waste containers. Substances in
batteries are harmful to human health and the environment. Dispose of electrical equipment at a
collection point or recycling center. Contact your local authority for detailed information.
SUPPORT
Our searchable support knowledge base contains information on workflows, tips, hints, and probable
resolutions to error messages or commonly encountered situations.
Normal support business hours are Monday - Friday, 8 AM — 5 PM USA Central Time.
Our GeoCue Support website contains general workflow information, in addition to specific issue and
error messages that you may encounter. Click on the link and search for information contained in the
knowledge base.
If a support request is sent during business hours a representative will typically get back to you within 4
hours. If received after hours, a response will be sent the following day. To speed response time please
include the following information in your request:
•Contact information - please include e-mail address and phone number
•Company name
•Product name and version number
•Model and Serial Number
If your request includes problems pertaining to a specific error message, please include a screenshot of
the error message.
For hardware and software support contact: [e-mail]