gfm BT90S User manual

R
BT90S Bluetooth Traveller Speaker
A/C Adapter and 3 AAA batteries
Thank you for buying the new BT90S Traverller Speaker. You can
use the A/C power adapter to power up the BT90S directly or place 3 AAA dry
batteries into the BT90S to obtain the power.
Bluetooth
Turning on / Turning off the Traveller Speaker
To turn on the speaker, please switch the power ON/OFF switch to the “I”
position. To turn it off, please switch the power switch to the “O” position.
1. Battery cover(Insert 3 AAA batteries).
2. Power ON/OFF switch.
3. DC power input socket(5VDC).
4. Audio input socket.
5. Backward switch.(only applied to audio
devices supporting A2DP and AVRCP Profiles)
6. Volume Down switch.
7. Forward switch. (only applied to audio devices supporting A2DP and AVRCP
Profiles)
8. ON/OFF/Pairing/Pause switch.
a) When BT90S is powered on, press and hold (about 2 seconds) until
LED flashes Green to turn ON.
b) When BT90S is powered on, press and hold (about 4 seconds) until
LED flashes Green and Red alternatively to enter into pairing mode.
c) When BT90S is powered on, press and hold (about 4 seconds) until
LED turns red to turn OFF when playing.
d) Press it once when playing --- Pause
Press it once again --- Resume play
9. Volume Up switch.
10. a) LED flashes Green -- is ON
b) LED flashes Green and Red alternatively -- enters into
Pairing mode
c) LED is red -- will be powered OFF
11. Power LED is Blue -- BT90S is Power ON
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth Bluetooth
Bluetooth Bluetooth
Bluetooth Bluetooth
1
(Fig.1)
(Fig.2)
(Fig.3)
Function Keys
2
When you purchase a Standalone pack with BT90S Traveller Speaker only,
please follow this Guide.
1. Pairing
a. While the Speaker is powered off, switch the power ON/OFF switch (Key
2) to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) will
become blue. Press and hold BT ON/OFF/Pairing/Pause switch (Key 5,
Fig.2) for 4 seconds, the LED will flash red and green
alternatively, which indicates the Speaker in Pairing Mode. The Pairing
Mode will last for one minute.
b. Put the Speaker and the enabled (with A2DP and AVRCP
profiles) Mobile Phone / PDA / MP3 close to each other, 0.5 to 3 meters.
c. Follow the operation instructions of your enabled (with A2DP
and AVRCP profiles) Mobile Phone/ PDA / MP3 to start the pairing
process. Typically, this has to be done by going to a setup or connect
menu to discover the Speaker. It may take some time to search it
depending on the number of devices nearby.
d. Your Mobile Phone / PDA / MP3 will display the model name “BT90S if it
has found the Speaker; and ask for a passkey. Enter a sequence of
“0000 . After successful pairing, follow the instructions to establish the
connection with the Speaker.
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
”
”
Bluetooth mobile phoneBluetooth enabled PDA Bluetooth Traveller Speaker
(Fig.4)
I.Traveller Speaker paired with Bluetooth enabled (with A2DP and
AVRCP profiles) Mobile Phone / PDA / MP3 Guide
3
e. If the pairing is successful, the LED will flash green, which
indicates it is in Standby Mode and ready to receive audio signals from the
Mobile Phone / PDA / MP3. If pairing does not occur as expected, turn the
Traverller Speaker and the audio device off. Wait for 10 seconds and
repeat the pairing process from the beginning (Fig.4).
Bluetooth
2. Listening to music
a. Play the music on the Mobile Phone / PDA / MP3 as normal; you will listen
to the music from the Speaker.
b. The speaker volume can be adjusted by pressing the VOL Up button
(Fig.2) / VOL Down button (Fig.2).
c. While listening to music (for example, song 2), press the Speaker’s
FORWARD >> button (Fig.2) will skip to next song (for example, song 3);
press the BACKWARD << button (Fig.2) will replay the current song (for
example, song 2). The fast forward & backward are also supported by
holding the FORWARD >> or BACKWARD << function keys. This remote
control function is supported only by the AVRCP profile in your
enabled devices.
d. Turn the Speaker off after use.
Remark: Details operation of music playing through A2DP profile
varies from different Mobile Phones / PDAs.
Bluetooth
Bluetooth
I.Traveller Speaker paired with Bluetooth enabled (with A2DP and
AVRCP profiles) Mobile Phone / PDA / MP3 Guide
User Manual

5
III. Traveller Speaker connected directly with
Audio Device Guide
1. Listening to music
a. While the Speaker is powered off, switch the power ON/OFF switch (Key 2)
to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) will become
blue.
b. Plug one end of the audio cable to the “Audio input socket” (socket 4,
Fig.1) of the Traverller Speaker and the other end to the 3.5 mm socket of
any audio source such as iPod, MP3, CD player, Notebook PC or other
audio devices.
c. Play the music on the audio source as normal; you will listen to the stereo
music from the speaker.
d. The Music volume can only be adjusted by pressing and releasing the VOL
+ / VOL- buttons of audio source.
e. Turn the Speaker off after use.
Accessories Table
Standalone pack
(BT90S)
Included
Audio cable
Included
3XAAA batteries
Included
A/C power adapter
Remarks: Specification of A/C power adaptor for BT90S
DC Voltage input: 5V, 500mA
DC plug: (1.35 X 3.5 X 11) mm
46
7
FCC part 15.19
FCC part 15.21
FCC part 15.105
This device compiles with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly approved
by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful Interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
-
-
-
FCC ID:NV6-CS8042
FCC
GFM Guarantee
If you are not totally satisfied with this GFM product you may return it,
to any Meijer store for a full refund within 6 months 180 days of()
purchase when accompanied by a receipt.
For customer support please call 866 845 9436 or go to() -
www.gfmproducts com.
Dist by Wholesale Merchandisers Inc.,.,
Dist by Wholesale Merchandisers Inc.,.,
2929 Walker NW,,2929 Walker NW,,
Grand Rapids MI 49544,Grand Rapids MI 49544,
Made in China