Gigabyte 6WMM7 Series User manual

R-20-03-000331
6WMM7 Series
USER'S MANUAL
1. The 6WMM7 motherboard Series includes 6WMM7
(82810-DC100) , 6WMM7-1(82810) and 6WMM7-E(82810E).
2. Support Dual BIOS(Optional).
3. Support ISA Bus Slot (Optional).
4. Support YAMAHA YMF744 Sound Chip (Optional).
5. Support Suspend To RAM Function.
6. System power on by PS/2 Mouse: First, enable this function in
CMOS Setup, then you can power on the system by double
clicking the right or left button of your PS/2 Mouse.
7. System power on by Keyboard: If your ATX power supply
supports larger than 300 mA 5V Stand-By current (depends on
the specification of keyboards), you can power on your system
by entering password from the Keyboard after setting the
“Keyboard power on” jumper and password in CMOS
Setup(Optional).
8. Support 3 steps ACPI LED selectable.
9. Support Modem Ring-On (Include internal Modem and
external modem on COM A and COM B).
10. Support Wake-up On LAN (Your ATX power supply must
support larger than 720 mA 5V Stand-By current).
11. Support TV/DFP(Digital Flat Panel) function by TV/DFP
daughter card (Optional).
12. The PCB version 2.0 and above have supported Intel
Pentium®!!! 256K Socket 370 Processor.
13. Support AMR function.
INTEL

Celeron TM /Pentium®!!!Socket 370 Processor MAIN BOARD

Hardware Installation
3-20
REV. 2.0ThirdEdition

6WMM7 Series Motherboard
1
The author assumes no responsibility for any errors or omissions that may
appear in this document nor does it make a commitment to update the
information contained herein.
Third-party brands and names are the property of their respective owners.

Quick Installation Guide
2
Mar. 31,2000 Taipei, Taiwan
I. Quick Installation Guide :
The system bus frequency can be switched between 66MHz ~133MHz by
adjusting JP1 & JP33. The CPU Frequency is control by BIOS.
M
The CPU speed must match with the frequency RATIO. It will cause
system hanging up if the frequency RATIO is higher than that of CPU.
6WMM7-1/
6WMM7
ICH/
82801
GMCH/
82810/
82810-DC100
CPU
AC9
7
YMF
744
Main
BIOS
Back
up
JP1
CPU JP1
AUTO 1-2
66 2-3
100 NC
1
Figure 1: other chipset CPU speed setup

6WMM7 Series Motherboard
3
6WMM7-E
ICH/
82801
GMCH/
82810E
CPU
AC9
7
YMF
744
Main
BIOS
Back
up
JP1
CPU JP1 JP33
AUTO 1-21-2
66 2-32-3
100 NC 2-3
133 NC NC
1
JP33
1
Figure 2: for 82810E chipset CPU speed setup
«
Note: Please set the CPU host frequency in accordance with your
processor’s specifications. We don’t recommend you to set the
system bus frequency over the CPU’s specification because these
specific bus frequencies are not the standard specifications for
CPU, chipset and most of the peripherals. Whether your system
can run under these specific bus frequencies properly will depend
on your hardware configurations, including CPU, Chipsets,
SDRAM,Cards….etc.
«
Note: JP33 is only available when the motherboarduse 82810E
chipset.
JP17~JP20 (Optional) (See Figure 3) (ICS 9248-73)
CPU SDRAM PCI JP20 JP19 JP18 JP17
AUTO 100 33 open open 2-32-3
150 150 37.5 1-22-32-31-2
140 140 35 2-32-32-31-2
133.3 133.3 44.43 2-31-21-22-3
133.3 133.3 33.32 1-21-21-22-3
124 124 41.33 1-22-31-22-3
120 120 40 2-32-31-22-3
114.99 114.99 38.33 2-31-22-31-2
105 105 35 2-31-22-32-3

Quick Installation Guide
4
100.9 100.9 33.63 1-22-32-32-3
100.23 100.23 33.41 2-32-32-32-3
95 95 31.67 1-21-21-21-2
90 90 30 2-31-21-21-2
83.31 124.96 41.65 1-22-31-21-2
75 112.5 37.5 2-32-31-21-2
70 105 35 1-21-22-31-2
66.89 100.33 33.44 1-21-22-32-3
« Note: We don’t recommend you to set up your system speed to
70,75,83,90,95,105,115,120,124,140 or 150MHz because these
frequencies are not the standard specifications for CPU, Chipset
and most of the peripherals. Whether your system can run under
70,75,83,90,95,105,115,120,124,140 or 150MHz properly will
depend on your hardware configurations: CPU, SDRAM, Cards,
etc.

6WMM7 Series Motherboard
5
JP17/ JP18 / JP19 / JP20 (Optional) :
6WMM7
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
JP17
1
JP18
1
JP19
1
JP20
1
66 MHz
JP17
1
JP18
1
JP19
1
JP20
1
100 MHz
Figure 3

Quick Installation Guide
6
II. Jumper setting :
GN : Green Function Switch
6WMM7
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
PIN No.
Function
Open
Normal Operation
Close Entering Green
Mode
GD : Green Function LED
6WMM7
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
PIN No.
Function
1LED +
2LED −
+
−
1

6WMM7 Series Motherboard
7
HD : IDE Hard Disk Active LED
6WMM7
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
PIN No.
Function
1LED +
2LED −
1
+
−
SPK : External Speaker Connector
6WMM7
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
External Speaker
+
1
PIN No. Function
1VCC
2NC
3NC
4Data

Quick Installation Guide
8
J16 : Buzzer Enable (Optional)
6WMM7
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
PIN No.
Function
Open Internal Buzzer Disable
Close Internal Buzzer Enable
RES : Reset Switch
6WMM7
ICH/
82801
GMCH/
82810
CPU
AC97
YMF
744
Main
BIOS
Backup
BIOS
PIN No.
Function
Open Normal
Operation
Close Reset Hardware
System