Gigabyte 8S648-RZ User manual

8S648-RZ/
8S648-RZ-C
User'sManual
Intel®Pentium®4ProcessorMotherboard
Rev.1001
12ME-8S648RZ-1001
Copyright
©2003GIGABYTETECHNOLOGYCO., LTD
CopyrightbyGIGA-BYTETECHNOLOGYCO.,LTD.("GBT").Nopartofthismanualmaybereproduced ortransmitted inanyfrom
withoutthe expressed,written permission ofGBT.
Trademarks
Third-partybrandsandnamesarethepropertyoftheirrespectiveowners.
Notice
Pleasedo notremoveanylabelson motherboard,thismayvoidthe warrantyofthismotherboard.
Due torapidchange intechnology,someofthe specificationsmightbe outofdatebeforepublication ofthisbooklet.
The authorassumesnoresponsibilityforanyerrorsoromissionsthatmayappearinthisdocumentnordoesthe authormakea
commitmenttoupdatetheinformationcontained herein.

Mother Board
8S648-RZ
Mar. 20, 2004
Motherboard 8S648-RZ
Mar. 20 ,2004

Preparing YourComputer
Computermotherboardsand expansion cardscontainverydelicateIntegrated Circuit(IC)chips.To
protectthemagainstdamagefromstaticelectricity,youshouldfollowsomeprecautionswheneveryou
workon yourcomputer.
1.Unplug yourcomputerwhen working onthe inside.
2.Useagroundedwriststrap beforehandlingcomputercomponents.Ifyou do nothaveone,
touchbothofyourhandstoasafelygrounded objectortoametalobject, suchasthe power
supplycase.
3.Holdcomponentsbythe edgesand trynottouchthe ICchips,leadsorconnectors,orother
components.
4.Placecomponentson agrounded antistaticpad oron thebag thatcamewiththe components
wheneverthe componentsareseparated fromthe system.
5.EnsurethattheATXpowersupplyisswitched off beforeyou plug inorremovethe ATXpower
connectoronthemotherboard.
Installing themotherboardtothechassis
Ifthe motherboardhasmounting holes,buttheydon'tline upwiththe holeson the baseand there
areno slotstoattachthe spacers,do notbecomealarmed you can still attachthe spacerstothe
mounting holes.Justcutthe bottomportion ofthe spacers(the spacermaybe alittlehardtocutoff, so
be carefulofyourhands).Inthiswayyoucan stillattachthe motherboardtothe basewithoutworrying
aboutshortcircuits.Sometimesyoumayneed tousethe plasticspringstoisolatethe screwfromthe
motherboardPCBsurface,becausethe circuitwiremaybe nearbythe hole.Becareful,don'tletthe
screwcontactanyprinted circuitwriteorpartson the PCBthatarenearthe fixing hole,otherwiseit
maydamagethe boardorcauseboardmalfunctioning.

-4-8S648-RZSeriesMotherboard
English
TableofContents
Chapter1Introduction ................................................................................................5
FeaturesSummary...........................................................................................................................5
8S648-RZSeriesMotherboardLayout.............................................................................................6
BlockDiagram..................................................................................................................................7
HardwareInstallation Process .........................................................................................................8
Step 1:Install the CentralProcessing Unit(CPU)..........................................................................8
Step 1-1:CPUInstallation ................................................................................................. 9
Step 1-2:CPUCooling Fan Installation ............................................................................ 9
Step 2:InstallMemoryModules....................................................................................................10
Step 3:Install AGPCard............................................................................................................... 11
Step 4:Install I/OPeripheralsCables........................................................................................... 11
Step 4-1:I/OBack PanelIntroduction ............................................................................. 11
Step 4-2:ConnectorsIntroduction ................................................................................... 12
Chapter2BIOSSetup ............................................................................................. 19
The MainMenu (Forexample:BIOSVer.:F7d).........................................................................19
StandardCMOSFeatures.............................................................................................................21
Advanced BIOSFeatures.............................................................................................................23
IntegratedPeripherals.....................................................................................................................24
PowerManagementSetup .............................................................................................................26
PnP/PCIConfigurations.................................................................................................................28
PCHealthStatus............................................................................................................................29
Frequency/VoltageControl.............................................................................................................30
TopPerformance.............................................................................................................................31
LoadFail-SafeDefaults...................................................................................................................32
LoadOptimizedDefaults.................................................................................................................32
SetSupervisor/UserPassword.....................................................................................................33
Save&ExitSetup .........................................................................................................................34
ExitWithoutSaving ........................................................................................................................34
Chapter3Install Drivers.......................................................................................... 35

Introduction
English
-5-
CPU—Socket478 forIntel®Pentium®4(Northwood,Prescott)withHTTechnology
—Intel®Pentium®4533/400MHzFSB
—2nd cache dependson CPU
Chipset—NorthBridge:SiS648
—SouthBridge:SiS963L
Memory—3184-pinDDR DIMM sockets,supportsup to3GBDRAM(Max)
—SupportsDDR333/DDR266 DIMM
—SupportsUpto2un-bufferDIMMDDR333 orupto3un-buffer
Double-sidedDIMM DDR266
—Supportsonly2.5VDDR SDRAM
Slots—1AGPslot8X/4X(1.5V)devicesupport
—5PCIslotssupport
On-BoardIDE—2IDEcontrollerprovide IDEHDD/CD-ROM(IDE1,IDE2)withPIO,Bus
Master(UltraDMA33/ATA66/ATA100/ATA133)operation modes
—Can connectup to4IDEdevices
On-BoardFloppy—1Floppyportsupports2FDD with360K,720K,1.2M,1.44Mand 2.88Mbytes
On-BoardPeripherals—1ParallelportsupportsNormal/EPP/ECPmode
—2Serialport(COMA/COMB)
—6USB 2.0/1.1ports(2xRear,4xFrontbycable)
—1FrontAudioconnector
—1PS/2Keyboard
—1PS/2Mouse
On-BoardLAN*—BuildinICS1883 Chipset(10/100 Mbit)*
—1RJ45 port*
On-BoardSound —CMedia9761 CODEC
—Support2/4/6channel
—Line Out/Line In/MicIn
—SPDIFOut/SPDIFIn
—CD In/AUX_IN/GamePort
BIOS—Licensed AWARD BIOS
—SupportsQ-Flash™
I/OControl—IT8705
HardwareMonitor—CPU/SystemFan Revolution detect
—CPU/SystemFan Fail Warning
—CPUTemperatureDetect
—SystemVoltage Detect
AdditionalFeatures—Supports@BIOS™
—SupportsEasyTune 4™
Overclocking —OverVoltage (DDR/AGP)byBIOS
—OverClock (DDR/AGP/CPU/PCI)byBIOS
FormFactor—ATXsizeformfactor,29.5cmx21cm
Chapter1Introduction
Features Summary
"*"Onlyfor8S648-RZ.

-6-8S648-RZSeriesMotherboard
English
"*"Onlyfor8S648-RZ.
"#"Onlyfor8S648-RZ-C.
8S648-RZSeries MotherboardLayout
KB_MS
COMA
LPT
USB_LAN*
SOCKET478
CPU_FAN
ATX
COMB
IDE2
GAME
LINE_IN
LINE_OUT
MIC_IN
ATX_12V
8S648-RZ
HyperThreading Support
SPDIF_IO
PWR_LED
F_USB2
F_PANEL
SYS_FANF_USB1
F_AU DIO
AUX_IN
IDE1
DDR1
SiS648
IT8705
P4Titan
FDD
PCI3
BIOS
SiS963L
PCI4
PCI5
BAT
PCI2
CODEC
CLR_CMOS
CD_IN
AGP
DDR2
PCI1
DDR3
SUR_CEN
ICS1883 *
#
AGP8X
VRM10.0
29.5 cm
21 cm

Introduction
English
-7-
"*"Onlyfor8S648-RZ.
Block Diagram
Pentium4
Socket478
CPU
SiS648
AC97
CODEC
SiS963L
CPUCLK+/-(100/133 MHz)
SystemBus
400/533 MHz
DDR
266/333 MHz
ZCLK(66/133MHz)
HCLK+/-(100/133MHz)
66/133 MHz
33 MHz
14.318 MHz
48 MHz
24 MHz
33 MHz
LPCBUS
AGP4X/8X
AGPCLK
(66MHz)
5PCI
PCICLK
(33MHz)
AC97 Link
MIC
LINE-IN
LINE-OUT
6USB
Ports
ATA33/66/100/133
IDEChannels
Floppy
LPTPort
PS/2
KB/Mouse
COM
Ports
BIOS
IT8705
GamePort
CLKGEN
ZCLK(66/133MHz)
CPUCLK+/-(100/133MHz)
AGPCLK(66MHz)
HCLK+/-(100/133MHz)
PCICLK(33MHz)
USBCLK(48MHz)
14.318 MHz
33 MHz
ICS1883 *
RJ45 *

-8-8S648-RZSeriesMotherboard
English
Tosetup yourcomputer,you mustcompletethe following steps:
Step 1-Install the CentralProcessing Unit(CPU)
Step 2-Install memorymodules
Step 3-Install expansion cards
Step 4-Install I/OPeripheralsCables
HardwareInstallation Process
Step1:Install theCentralProcessing Unit(CPU)
Beforeinstalling the processor,adheretothe following warning:
1.Pleasemakesurethe CPUtype issupported bythe motherboard.
2.The processorwill overheatwithoutthe heatsinkand/orfan,resulting inpermanent
irreparabledamage.
3. If you do notmatchthe CPUsocketPin1and CPUcutedge well,itwill causeimproper
installation.Pleasechange the insertorientation.
4.Applythermalgreasebetween the processorand cooling fan.
5.Neverrun the processorwithoutthe heatsinkproperlyand firmlyattached.Permanent
damage will result.
6.Pleasesetthe CPUhostfrequency inaccordancewithyourprocessor'sspecifications.
Wedon'trecomm end you tosetthe systembusfrequency overthe CPU'sspecification
becausethesespecificbusfrequenciesarenotthe standardspecificationsforCPU,
chipsetand mostofthe peripherals.Whetheryoursystemcan run underthesespecific
busfrequenciesproperlywill depend on yourhardwareconfigurations,including CPU,
Memory,Cards…etc.
HTfunctionalityrequirementcontent:
Enabling the functionalityofHyper-Threading Technologyforyourcomputersystem
requiresall ofthe following platformcomponents:
-CPU:AnIntel®Pentium4ProcessorwithHTTechnology
-Chipset: AnSiS®ChipsetthatsupportsHTTechnology
-BIOS:ABIOSthatsupportsHTTechnologyand hasitenabled
-OS:Anoperation systemthathasoptimizationsforHTTechnology
Step2
Step4
Step4
Step4
Step1
Step3

-9-HardwareInstallation Process
English
Step1-1:CPUInstallation
Figure1.
Pull the rod tothe 90-degree directly.
Figure2.
LocatePin1inthe socketand lookfora(golden)cutedge on the
CPUuppercorner.Insertthe CPUintothe socket. (Donotforcethe
CPUintothe socket.)Then movethe socketlevertothe locked
position whileholding pressureon the centerofthe CPU.
Step1-2:CPUCooling FanInstallation
Figure1.
Applythe thermaltape(orgrease)toprovide betterheatconduction
between yourCPUand cooling fan.
Figure2.
Fasten the cooling fan supporting-baseontothe CPUsocketon the
motherboard.
Socket
Actuation
Lever
Figure3.
Makesurethe CPUfan isplugged tothe CPUfan connector,than
install complete.

-10 -8S648-RZSeriesMotherboard
English
Beforeinstalling the memorymodules,adheretothe following warning:
1.Pleasenotethatthe DIMM modulecan onlyfitinone direction due tothe one notch.
Wrong orientation will causeimproperinstallation.Pleasechange the insertorientation.
Step2:Install MemoryModules
The motherboardhas3dualinline memorymodule(DIM M)sockets.The BIOSwill automatically
detectsmemorytype and size.Toinstall the memorymodule,justpushitverticallyintothe DIMM
socket. The DIM M modulecan onlyfitinone direction due tothe notch.Memorysizecan varybetween
sockets.
DDR
Notch
1.The DIMM sockethasanotch,sothe DIMM
memorymodulecan onlyfitinone direction.
2. Insertthe DIMM memorymoduleverticallyinto
the DIM M socket. Then pushitdown.
3.Closethe plasticclipatbothedgesofthe DIMM
socketstolock the DIM M module.
Reversethe installation stepswhen you wishto
removethe DIM M module.

-11 -HardwareInstallation Process
English
Step4:Install I/OPeripheralsCables
Step4-1:I/OBack PanelIntroduction
uPS/2Keyboardand PS/2Mouse connector
ThisconnectorsupportsstandardPS/2keyboardand PS/2mouse.
vParallelport(LPT)
Devicelikeprintercan be connected toParallelport.
w/xSerialport(COMA/COMB)
Mouseand modemetc.can be connected toSerialport.
yGame/MIDIport
Thisconnectorsupportsjoystick,MIDIkeyboardand otherrelateaudiodevices.
zLineOutjack
Connectthe stereo speakersorearphone tothisconnector.
{LineInjack
DeviceslikeCD-ROM,walkman etc.can be connecttoLine Injack.
Step3:Install AGPCard
1.Read the relateAGPcard'sinstruction documentbeforeinstall the AGPcardintothe computer.
2. If yourAGPcardhas"AGP8X/4X(1.5V)notch"(showbelow),pleasemakesureyourAGPcardisAGP
8X/4X(1.5V).
"*"Onlyfor8S648-RZ.
3.Pleasecarefullypull outthe small white-drawablebaratthe end ofthe AGPslotwhen you tryto
install/Uninstall the AGPcard.Pleasealign the AGPcardtothe onboardAGPslotand press firmly
downon the slot.MakesureyourAGPcardislocked bythe small white-drawablebar.
u
v
wx
y
z{
}*
~
|
AGP4X/8Xnotch

-12 -8S648-RZSeriesMotherboard
English
Step4-2:ConnectorsIntroduction
|MICInjack
Microphone can be connecttoMICInjack.
Afterinstallation ofthe audiodriver,you areabletouse2/4/6-channelaudiofeaturebysoftware
selection.You can connect"Frontspeaker"to"Line Out"jack,Connect"Rearspeaker"to
"Line In"jack and connect"Center/Subwoofer"to"MICIn"jack.
}LAN port*
LANisfastEthernetwith10/100Mbpsspeed.
~USBport
Beforeyou connectyourdevice(s)intoUSB connector(s),pleasemakesureyourdevice(s)
suchasUSB keyboard,mouse,scanner,zip,speaker...etc.HaveastandardUSB interface.
AlsomakesureyourOSsupportsUSB controller.If yourOSdoesnotsupportUSB controller,
pleasecontactOSvendorforpossiblepatchordriverupgrade.Formoreinformation please
contactyourOSordevice(s)vendors.
2
3
1
7
14
4
13 8
6
16
5
10
12
11
15
9
1)ATX_12V
2)ATX
3)CPU_FAN
4)SYS_FAN
5)IDE1/IDE2
6)FDD
7)PWR_LED
8)F_PANEL
9)F_AUDIO
10)SUR_CEN
11)CD_IN
12)AUX_IN
13)SPDIF_IO
14)F_USB1/F_USB2
15)CLR_CMOS
16)BAT
"*"Onlyfor8S648-RZ.

-13 -HardwareInstallation Process
English
1)ATX_12V(+12VPowerConnector)
Thisconnector(ATX_12V)suppliesthe CPUoperation voltage (Vcore).
If this"ATX_12Vconnector"isnotconnected,systemcannotboot.
2)ATX(ATXPower)
ACpowercordshouldonlybe connected toyourpowersupplyunitafterATXpowercableand
otherrelated devicesarefirmlyconnected tothe mainboard.
PinNo.Definition
1 3.3V
2 3.3V
3GND
4VCC
5GND
6VCC
7GND
8PowerGood
9 5VSB (stand by+5V)
10 +12V
PinNo.Definition
11 3.3V
12 -12V
13 GND
14 PS_ON(softon/off)
15 GND
16 GND
17 GND
18 -5V
19 VCC
20 VCC
3)CPU_FAN (CPUFanConnector)
Pleasenote,aproperinstallation ofthe CPUcoolerisessentialtopreventthe CPUfromrunning
underabnormalcondition ordamaged byoverheating.The CPUfan connectorsupportsMax.
currentup to600 mA.
PinNo.Definition
1GND
2+12V
3Sense
1
10
20
11
1
PinNo.Definition
1GND
2GND
3+12V
4+12V
3
1
4
2

-14 -8S648-RZSeriesMotherboard
English
4)SYS_FAN (SystemFanConnector)
Thisconnectorallowsyou tolinkwiththe cooling fan on the systemcasetolowerthe system
temperature.
PinNo.Definition
1GND
2+12V
3Sense
5)IDE1/IDE2(IDE1/IDE2Connector)
ImportantNotice:Pleaseconnectfirstharddisk toIDE1and connectCD-ROMtoIDE2.The red
stripe ofthe ribbon cablemustbe the sameside withthe Pin1.
6)FDD (FloppyConnector)
Pleaseconnectthe floppydriveribbon cablestoFDD.It supports360K,1.2M,720K,1.44Mand
2.88Mbytesfloppydisk types.
The red stripe ofthe ribbon cablemustbe the sameside withthe Pin1.
1
IDE1
IDE2
1
39
2
40
1
34 2
33

-15 -HardwareInstallation Process
English
7)PWR_LED
PWR_LEDisconnectwiththe systempowerindicatortoindicatewhetherthe systemison/off.
It will blinkwhen the systementerssuspend mode.If you usedualcolorLED,powerLEDwill turn
toanothercolor.
PinNo.Definition
1MPD+
2MPD-
3MPD-
8)F_PANEL(2x10 pinsConnector)
Pleaseconnectthe powerLED,PCspeaker,resetswitchand powerswitchetcofyourchassisfront
paneltothe F_PANELconnectoraccording tothe pinassignmentbelow.
HD (IDEHardDisk ActiveLED)Pin1:LEDanode(+)
Pin2:LEDcathode(-)
SPK(SpeakerConnector) Pin1:VCC(+)
Pin2-Pin3:NC
Pin4:Data(-)
RES(ResetSwitch)Open:NormalOperation
Close:ResetHardwareSystem
PW(SoftPowerConnector) Open:NormalOperation
Close:PowerOn/Off
MSG(MessageLED/Power/Sleep LED)Pin1:LEDanode(+)
Pin2:LEDcathode(-)
NC NC
1
1 2
19 20
HD-
HD+
RES+
RES-
NC
IDEHardDisk ActiveLED
ResetSwitch
SPEAK-
MSG-
MSG+
PW-
PW+
Message LED/
Power/
Sleep LED
SpeakerConnector
SPEAK+
1
1
1 1 1
Soft Power
Connector

-16 -8S648-RZSeriesMotherboard
English
PinNo.Definition
1MIC
2GND
3REF
4Power
5FrontAudio(R)
6RearAudio(R)
7Reserved
8NoPin
9FrontAudio(L)
10 RearAudio(L)
9)F_AUDIO(FrontAudioConnector)
If you wanttouseFrontAudioconnector,you mustremove5-6,9-10 Jumper.
Inordertoutilizethe frontaudioheader,yourchassismusthavefrontaudioconnector.Alsoplease
makesurethe pinassigmenton the cableisthe sameasthe pinassigmenton the MBheader.To
find outifthe chassisyou arebuying supportfrontaudioconnector,pleasecontactyourdealer.
Pleasenote,you can havethe alternativeofusing frontaudioconnectororofusing rearaudio
connectortoplaysound.
10 9
12
10)SUR_CEN(Surround CenterConnector)
PleasecontactyournearestdealerforoptionalSUR_CENcable.
1
56
2
PinNo.Definition
1SUROUTL
2SUROUTR
3GND
4NoPin
5CENTER_OUT
6BASS_OUT
11)CD_IN(CD InConnector)
ConnectCD-ROMorDVD-ROMaudioouttothe connector.
PinNo.Definition
1CD-L
2GND
3GND
4CD-R
1

-17 -HardwareInstallation Process
English
12)AUX_IN(AUXInConnector)
Connectotherdevice(suchasPCITVTunneraudioout)tothe connector.
PinNo.Definition
1AUX-L
2GND
3GND
4AUX-R
1
1
6
2
5
PinNo.Definition
1VCC
2NoPin
3SPDIF
4SPDIFI
5GND
6GND
13)SPDIF_IO(SPDIFIn/OutConnector)
The SPDIFoutputiscapableofproviding digitalaudiotoexternalspeakersorcompressed AC3
datatoan externalDolbyDigitalDecoder.Usethisfeatureonlywhen yourstereo systemhas
digitalinputfunction.Becarefulwiththe polarityofthe SPDIF_IOconnector.Check the pin
assignmentcarefullywhileyou connectthe SPDIFcable,incorrectconnection between the cable
and connectorwill makethe deviceunabletoworkoreven damage it. ForoptionalSPDIFcable,
pleasecontactyourlocaldealer.

-18 -8S648-RZSeriesMotherboard
English
15)CLR_CMOS(ClearCMOS)
You mayclearthe CMOSdatatoitsdefaultvaluesbythisjumper.ToclearCMOS,temporarily
shor1-2pin.Defaultdoesn'tinclude the "Shunter"topreventfromimproperusethisjumper.
1
1Open:Normal
Short: ClearCMOS
16)BAT(BATTERY)
CAUTION
Dangerofexplosion ifbatteryisincorrectlyreplaced.
Replaceonlywiththe sameorequivalenttype
recommendedbythemanufacturer.
Disposeofused batteriesaccording tothe
manufacturer'sinstructions.
If you wanttoeraseCMOS...
1.TurnOFF thecomputerand unplugthe powercord.
2.Removethe battery,waitfor30 second.
3.Re-install the battery.
4.Plug the powercordand turnONthe computer.
14)F_USB1/F_USB2(FrontUSBConnector)
Becarefulwiththe polarityofthe frontUSB connector.Check the pinassignmentcarefullywhile
you connectthe frontUSB cable,incorrectconnection between the cableand connectorwill make
the deviceunabletoworkoreven damage it. ForoptionalfrontUSB cable,pleasecontactyour
localdealer.
2 10
19
PinNo.Definition
1Power
2Power
3USBDX-
4USB Dy-
5USBDX+
6USB Dy+
7GND
8GND
9NoPin
10 NC
+

-19 -BIOSSetup
English
CONTROLKEYS
< > < >< >< > Movetoselectitem
<Enter>SelectItem
<Esc>MainMenu -Quitand notsavechangesintoCMOSStatusPage Setup Menu
and Option Page Setup Menu -Exitcurrentpage and returntoMainMenu
<+/PgUp>Increasethe numericvalue ormakechanges
<-/PgDn>Decreasethe numericvalue ormakechanges
<F1>Generalhelp,onlyforStatusPage Setup Menu and Option Page Setup Menu
<F2>ItemHelp
<F5>Restorethe previousCMOSvalue fromCMOS,onlyforOption Page Setup Menu
<F6>Load the file-safedefaultCMOSvalue fromBIOSdefaulttable
<F7>Load the Optimized Defaults
<F8>Q-Flashutility
<F9>SystemInformation
<F10>Saveall the CMOSchanges,onlyforMainMenu
BIOSSetup isan overviewofthe BIOSSetup Program.The programthatallowsuserstomodifythe
basicsystemconfiguration.Thistype ofinformation isstored inbattery-backed CMOSRAMsothatit
retainsthe Setup information when the poweristurned off.
ENTERINGSETUP
Powering ONthe computerand pressing <Del>immediatelywill allowyou toenterSetup.If you require
moreadvanced BIOSsettings,pleasego to"Advanced BIOS"setting menu.ToenterAdvanced BIOS
setting menu,press "Ctrl+F1"keyon the BIOSscreen.
Chapter2BIOSSetup
MainMenu
The on-line description ofthe highlighted setup function isdisplayed atthe bottomofthe screen.
StatusPageSetup Menu /Option PageSetup Menu
Press F1topop up asmall helpwindowthatdescribesthe appropriatekeys touseand the possible
selectionsforthe highlighted item.Toexitthe HelpWindowpress <Esc>.
TheMainMenu (Forexample:BIOSVer.:F7d)
Onceyou enterAwardBIOSCMOSSetup Utility,the MainMenu (asfigurebelow)will appearon the
screen.The MainMenu allowsyou toselectfromeightsetup functionsand twoexitchoices.Use
arrowkeys toselectamong the itemsand press <Enter>toacceptorenterthe sub-menu.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}Standard CMOS Features
}Advanced BIOS Features
}Integrated Peripherals
}Power Management Setup
}PnP/PCI Configurations
}PC Health Status
}Frequency/Voltage Control
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: Quit higf: Select Item
F8: Q-Flash F10: Save & Exit Setup
Time, Date, Hard Disk Type...

-20 -8S648-RZSeriesMotherboard
English
•StandardCMOSFeatures
Thissetup page includesall the itemsinstandardcompatibleBIOS.
•AdvancedBIOSFeatures
Thissetup page includesall the itemsofAwardspecialenhanced features.
•IntegratedPeripherals
Thissetup page includesall onboardperipherals.
•PowerManagementSetup
Thissetup page includesall the itemsofGreen function features.
•PnP/PCIConfiguration
Thissetup page includesall the configurationsofPCI&PnPISA resources.
•PCHealthStatus
Thissetup page isthe SystemautodetectTemperature,voltage,fan,speed.
•Frequency/VoltageControl
Thissetup page iscontrolCPUclock and frequency ratio.
•TopPerformance
If you wishtomaximizethe performanceofyoursystem,set"Top Performance"as"Enabled".
•LoadFail-SafeDefaults
Fail-SafeDefaultsindicatesthe value ofthe systemparameterswhichthe systemwouldbe insafe
configuration.
•LoadOptimizedDefaults
Optimized Defaultsindicatesthe value ofthe systemparameterswhichthe systemwouldbe in
bestperformanceconfiguration.
•SetSupervisorPassword
Change,set, ordisablepassword.It allowsyou tolimitaccess tothe systemand Setup,orjust
toSetup.
•SetUserPassword
Change,set, ordisablepassword.It allowsyou tolimitaccess tothe system.
•Save &ExitSetup
SaveCMOSvalue settingstoCMOSand exitsetup.
•ExitWithoutSaving
Abandon all CMOSvalue changesand exitsetup.
Ifyoucan'tfindthesettingyou want,pleasepress"Ctrl+F1"tosearchtheadvanced
optionhidden.