Gigabyte GA-6VXE7+ User manual

R-30-03-010628
12ME-6VXE7P-3003
6VXE7+
USER'S MANUAL
1. System power on by PS/2 Mouse: First, enable this function
in CMOS Setup, then you can power on the system by double
clicking the right or left button of your PS/2 Mouse.
2. System power on by Keyboard: If your ATX power supply
supports larger than 300 mA 5V Stand-By current (depends
on the specification of keyboards), you can power on your
system by entering password from the Keyboard after setting
the “Keyboard power on” jumper and password in CMOS
Setup.
3. Support 3 steps ACPI LED selectable.
4. Support Modem Ring-On. (Include internal Modem and
external modem on COM A and COM B)
5. Support Wake-up On LAN. (Your ATX power supply must
support larger than 720 mA 5V Stand-By current)
CeleronTM /Pentium®!!! Socket 370 Processor Motherboard
REV. 3.0 Third Edition

6VXE7+
1
The author assumes no responsibility for any errors or omissions which may
appear in this document nor does it make a commitment to update the
information contained herein.
Third-party brands and names are the property of their respective owners.
Sound Blaster is a registered trademark of Creative Technology Ltd in the
United States and certain other countries. Sound Blaster-LINK and SB-LINK
are trademarks of Creative Technology Ltd.
Jun. 28, 2001 Taipei, Taiwan

Quick Installation Guide
2
I. Quick Installation Guide :
The system bus speed can be set for 66,100,133MHz. The user can select the
system bus speed (SW2) and change the DIP SWITCH (SW1) selection to set
up the CPU speed for 500MHz – 1GHz and faster processor.
0
00
0The CPU speed must match with the frequency RATIO. It will cause
system hanging up if the frequency RATIO is higher than CPU's.
SW1: (O:ON / X:OFF)
DIP SWITCH
FREQ. RATIO 1 2 3 4
X 3 O X O O
X 3.5 X X O O
X 4 O O X O
X 4.5 X O X O
X 5 O X X O
X 5.5 X X X O
X 6 O O O X
X 6.5 X O O X
X 7 O X O X
X 7.5 X X O X
X 8 O O X X
X 8.5 O X O O
X 9 X X O O
X 9.5 X O O O
X 10 X O X X
X 10.5 O O X O
X11 O X X X
X11.5 X O X O
X12 O X X O
X13 X X X O
X14 O O O X
X15 X O O X
X16 O X O X

6VXE7+
3
Set System Bus Speed
SW2: (O:ON / X:OFF)
CPU PCICLK 1 2 3 4 5 6
66/100/
133/Auto 33.3 X X X X O O
66 33.3 O O X X X X
75 37.5
O O O X X X
83 41.6
O O X O X X
100 33.3 O X X X X X
112 37.3
O X O X X X
124 31 X X X O X X
133 33.3 X X X X X X
140 35 X X O O X X
150 37.5 X X O X X X
0
00
0Note: We don’t recommend you to set up your system speed to
75,83,112,124,140 or 150MHz because these frequencies are not
the standard specifications for CPU, Chipset and most of the
peripherals. Whether your system can run under
75,83,112,124,140 or 150 MHz properly will depend on your
hardware configurations: CPU, SDRAM, Cards, etc.
0
00
0Intel Processor all have locked Frequency Multiple, so you can not
change the CPU Frequency Multiple.

Quick Installation Guide
4
1. CeleronTM 533/ 66 MHz FSB
PIIX4
6VXE7+
82443BX
SW1
ON
1 2 3 4
SW2
1 2 3 4 5 6
ON
2. CeleronTM 566/ 66 MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
3. CeleronTM 600/ 66 MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON

6VXE7+
5
4. CeleronTM 633/ 66 MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
5. CeleronTM 667/ 66 MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
6. CeleronTM 700/ 66 MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
7. Cyrix III 550/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON

Quick Installation Guide
6
8. Cyrix III 533/133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
9. Cyrix III 600/133MHz FSB
SW2
1 2 3 4 5 6
ON
SW1
ON
1 2 3 4
10. Pentium®!!! 500/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
11. Pentium®!!! 550/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON

6VXE7+
7
12. Pentium®!!! 600/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
13. Pentium
®!!! 650/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
14. Pentium
®!!! 700/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
15. Pentium
®!!! 750/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON

Quick Installation Guide
8
16. Pentium
®!!! 800/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
17. Pentium
®!!! 850/100MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
18. Pentium®!!! 533/133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
19. Pentium®!!! 600/133 MHz FSB
SW2
1 2 3 4 5 6
ON
SW1
ON
1 2 3 4

6VXE7+
9
20. Pentium®!!! 667/133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
21. Pentium®!!! 733/133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
22. Pentium®!!! 800/133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
23. Pentium®!!! 866/133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON

Quick Installation Guide
10
24. Pentium®!!! 933/133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON
25. Pentium®!!! 1GHz /133MHz FSB
SW2
1 2 3 4 5 6
SW1
ON
1 2 3 4
ON

6VXE7+
11
II. Jumper setting :
SPK : Speaker Connector
PIIX4
6VXE7+
82443BX
PIN No. Function
1 VCC
2 NC
3 NC
4 Data
External Speaker
+ 1
RST : Reset Switch
PIIX4
6VXE7+
82443BX
PIN No. Function
Open Normal
Operation
Close Reset Hardware
System

Quick Installation Guide
12
PW LED : Power LED Connector
PIIX4
6VXE7+
82443BX
PIN No. Function
1 LED +
2 LED −
3 LED −
+ −
−−
−−
−−
−
HD : IDE Hard Disk Active LED
PIIX4
6VXE7+
82443BX
PIN No. Function
1 LED +
2 LED −
+
−
−−
−

6VXE7+
13
GN : Green Function Switch
PIIX4
6VXE7+
82443BX
PIN No. Function
Open Normal Operation
Close Entering Green
Mode
GD : Green LED
PIIX4
6VXE7+
82443BX
PIN No. Function
1 LED +
2 LED −
+
−
−−
−

Quick Installation Guide
14
Soft POWER : Soft Power Connector
PIIX4
6VXE7+
82443BX
PIN No. Function
1 Signal
2 GND
IR : Infrared Connector (Optional)
PIIX4
6VXE7+
82443BX
PIN No. Function
1 IR data output
2 GND
3 IR data input
4 NC
5 VCC(+5V)
1 +

6VXE7+
15
ATX POWER : ATX Power Connector
PIIX4
6VXE7+
82443BX
Pin No. Function
3,5,7,13,
15-17 GND
1,2,11 3.3V
4,6,19,20 VCC
10 +12V
12 -12V
18 -5V
8 Power Good
9 5V SB stand by+5V
14 PS-ON(Soft On/Off)
1 11
10 20
PS/2 Mouse / Keyboard Connector
PIIX4
6VXE7+
82443BX
PS/2 Mouse/ Keyboard
Pin No. Function
1 Data
2 NC
3 GND
4 VCC(+5V)
5 Clock
6 NC
PS/2 Keyboard
PS/2 Mouse
12
3
4
56

Quick Installation Guide
16
J2: CPU FAN
PIIX4
6VXE7+
82443BX
PIN No. Function
1 GND
2 +12V
3 SENSE
1
J3: PWR FAN
PIIX4
6VXE7+
82443BX
PIN No. Function
1 GND
2 +12V
3 SENSE
1

6VXE7+
17
J15 :SYSTEM FAN
PIIX4
6VXE7+
82443BX
PIN No. Function
1 GND
2 +12V
3 SENSE
1
IDE1: For Primary IDE Port
1
PIIX4
6VXE7+
82443BX

Quick Installation Guide
18
IDE2: For Secondary IDE Port
1
PIIX4
6VXE7+
82443BX
FLOPPY : Floppy Port
1
PIIX4
6VXE7+
82443BX