Gigabyte Z590 VISION D User manual

Z590 VISION D
User's Manual
Rev. 1001
12ME-Z59VSD-1001R
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product are
recyclable and reusable. GIGABYTE works with you to protect the environment.

Copyright
©2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specications and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmit-
ted, or published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of docu-
mentations:
For quick set-up of the product, read the Quick Installation Guide included with the product.
For detailed product information, carefully read the User's Manual.
For product-related information, check on our website at: https://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:
1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before
updating motherboard BIOS, drivers, or when looking for technical information.
Example:

- 3 -
Table of Contents
Box Contents...................................................................................................................5
Optional Items .................................................................................................................5
Z590 VISION D Motherboard Layout..............................................................................6
Z590 VISION D Motherboard Block Diagram.................................................................7
Chapter 1 Hardware Installation .....................................................................................9
1-1 Installation Precautions ................................................................................... 9
1-2 ProductSpecications................................................................................... 10
1-3 Installing the CPU and CPU Cooler............................................................... 14
1-3-1 Installing the CPU ..................................................................................................14
1-3-2 Installing the CPU Cooler ......................................................................................16
1-4 Installing the Memory .................................................................................... 17
1-4-1 DualChannelMemoryConguration....................................................................17
1-4-2 Installing a Memory................................................................................................18
1-5 Installing an Expansion Card......................................................................... 19
1-6 Setting up an AMD CrossFire™Conguration ............................................... 20
1-7 Back Panel Connectors................................................................................. 21
1-8 Internal Connectors ....................................................................................... 24
Chapter 2 BIOS Setup ..................................................................................................39
2-1 Startup Screen............................................................................................... 40
2-2 The Main Menu.............................................................................................. 41
2-3 Smart Fan 6 ................................................................................................... 43
2-4 Favorites (F11) ............................................................................................... 45
2-5 Tweaker.......................................................................................................... 46
2-6 Settings.......................................................................................................... 53
2-7 System Info. ................................................................................................... 60
2-8 Boot................................................................................................................ 61
2-9 Save & Exit .................................................................................................... 64
Chapter3 ConguringaRAIDSet ...............................................................................65
3-1 ConguringSATAControllers........................................................................ 65
3-2 InstallingtheRAIDDriverandOperatingSystem......................................... 70
3-3 Installing Intel®Optane™Memory and Storage Management....................... 71

- 4 -
Chapter 4 Drivers Installation .......................................................................................75
4-1 Drivers & Software......................................................................................... 75
4-2 Application Software...................................................................................... 76
4-3 Information..................................................................................................... 76
Chapter 5 Unique Features...........................................................................................77
5-1 BIOS Update Utilities..................................................................................... 77
5-1-1 Updating the BIOS with the Q-Flash Utility...........................................................77
5-1-2 Updating the BIOS with the @BIOS Utility........................................................... 80
5-1-3 Using Q-Flash Plus................................................................................................81
5-2 APP Center.................................................................................................... 82
5-2-1 EasyTune ............................................................................................................... 83
5-2-2 Fast Boot ............................................................................................................... 84
5-2-3 Game Boost .......................................................................................................... 85
5-2-4 RGBFusion........................................................................................................... 86
5-2-5 Smart Backup ....................................................................................................... 88
5-2-6 System Information Viewer................................................................................... 90
Chapter 6 Appendix......................................................................................................91
6-1 ConguringAudioInputandOutput.............................................................. 91
6-1-1 Conguring2/4/5.1/7.1-ChannelAudio..................................................................91
6-1-2 ConguringS/PDIFOut.........................................................................................93
6-1-3 Stereo Mix ............................................................................................................. 94
6-1-4 UsingtheVoiceRecorder..................................................................................... 95
6-1-5 DTS:X®Ultra.......................................................................................................... 96
6-2 Troubleshooting ............................................................................................. 98
6-2-1 Frequently Asked Questions ................................................................................ 98
6-2-2 Troubleshooting Procedure .................................................................................. 99
6-3 Debug LED Codes....................................................................................... 101
RegulatoryNotices ................................................................................................. 105
Contact Us ...............................................................................................................111

- 5 -
Box Contents
5Z590 VISION D motherboard
5Motherboard driver disc
5User's Manual
5Quick Installation Guide
5Four SATA cables
5One antenna
5M.2 screw(s)
5OneRGBLEDstripextensioncable
5One noise detection cable
5Two thermistor cables
5One G Connector
Optional Items
2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)
eSATAbracket(PartNo.12CF1-3SATPW-4*R)
3.5"FrontPanelwith2USB3.2Gen1ports(PartNo.12CR1-FPX582-2*R)
The box contents above are for reference only and the actual items shall depend on the product package you
obtain. The box contents are subject to change without notice.

- 6 -
Z590 VISION D Motherboard Layout
(Note) For debug code information, please refer to Chapter 6.
TYPEC_1
U32G2_2
TYPEC_2
U32G2_1
LGA1200
ATX
AUDIO
DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2
BAT
Intel®Z590
CLR_CMOS
M_BIOS
Intel®
2.5GbE
LAN
Intel®2.5GbE LAN
CODEC
PCIEX16
PCIEX8
PCIEX4
PCIEX1
F_U320G
F_U32
SYS_FAN5_PUMP SYS_FAN2
DB_PORT (Note)
EC_TEMP2
EC_TEMP1
SYS_FAN1
80110
M2A_CPU
80110
M2M_SB
6080110
M2P_SB
CNVI
Z590 VISION D
QFLASH_
PLUS
QFLED
F_USB2 F_PANELF_AUDIO LED_C1
F_USB1
NOISE_
SENSOR
SPI_TPMD_LED1 SYS_FAN6_
PUMP
SYS_FAN3
CPU_FAN
CPU_OPT
SYS_FAN4
iTE®
SuperI/O
D_LED2
LED_C2
ATX_12V_2X4ATX_12V_2X2
USB 2.0 Hub
Intel®
Thunderbolt™4
Controller
USB 3.2
Gen 1 Hub
SATA3 531
420
CPU DRAM
VGA BOOT
DP_HDMIU32_LAN2U32_LAN1
Temperature
sensor

- 7 -
Z590 VISION D Motherboard Block Diagram
LGA1200 CPU
DMI 3.0
eSPI
Bus
SPI
Bus
PCI Express 3.0 Bus
Center/Subwoofer
Speaker Out
Line Out
MIC
Line In
S/PDIFOut
RearSpeakerOut
CODEC
iTE®
SuperI/O
4 USB 3.2 Gen 1
4USB2.0/1.1
2 USB 3.2 Gen 2 Type A
2 USB 3.2 Gen 1
Intel®Z590
x4
LAN
RJ45
Intel®
2.5GbE LAN
x1
LAN
RJ45
Intel®
2.5GbE LAN
x1
1 PCI Express x1
M.2 Socket 3
(M2M_SB) USB 3.2
Gen 1 Hub
USB 2.0
Hub
BIOS
TPM
PCI Express 4.0 (Note)/3.0Bus
1 PCI Express x16
2 PCI Express x8
Switch
x16x16
or
(Note) Actual support may vary by CPU.
M.2 WIFI
6SATA6Gb/s
(SATA3 0~6)
x4
Switch
1 PCI Express x4
M.2 Socket 3
(M2P_SB)
or
CPUCLK+/-(100~500MHz)
DDR43200 (Note)/3000 (Note)/2933 (Note)/
2666/2400/2133MHz
1 USB Type-C®,
with USB 3.2 Gen 2x2 support
M.2 Socket 3
(M2A_CPU) (Note)
DDI
x4
DDI
2 USB Type-C®, with
USB 3.2 Gen 2 support
(or 2 Intel®Thunderbolt™4)
HDMI 1.4
DisplayPort In
PCIe 3.0 Bus
Switch
Intel®
Thunderbolt™4
Controller

- 8 -

- 9 -
Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become
damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's
manual and follow these procedures:
•Prior to installation, make sure the chassis is suitable for the motherboard.
•Priorto installation, donot remove orbreak motherboardS/N (Serial Number)sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
•Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
•When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
•When handling the motherboard, avoid touching any metal leads or connectors.
•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,
keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
•Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
•Before connecting or unplugging the power supply cable from the motherboard, make sure
the power supply has been turned off.
•Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
•Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
•To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
•Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
•Do not place the computer system on an uneven surface.
•Do not place the computer system in a high-temperature or wet environment.
•Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
•If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertiedcomputertechnician.
•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation
and/orgroundinginstructions.
Chapter 1 Hardware Installation

- 10 -
Hardware Installation
1-2 ProductSpecications
CPU LGA1200 package:
- 11th Generation Intel®Core™i9 processors/Intel®Core™i7 processors/
Intel®Core™i5 processors
- 10th Generation Intel®Core™i9 processors/Intel®Core™i7 processors/Intel®
Core™i5 processors/Intel®Core™i3 processors/Intel®Pentium®processors/
Intel®Celeron®processors*
* Limited to processors with 4 MB Intel®Smart Cache, Intel®Celeron®G5xx5 family.
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU
Chipset Intel®Z590 Express Chipset
Memory 11th Generation Intel®Core™i9/i7/i5 processors:
- Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules
10th Generation Intel®Core™i9/i7 processors:
- Support for DDR4 2933/2666/2400/2133 MHz memory modules
10th Generation Intel®Core™i5/i3/Pentium®/Celeron®processors:
- Support for DDR4 2666/2400/2133 MHz memory modules
4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)
of system memory
Dual channel memory architecture
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in
non-ECC mode)
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Prole (XMP) memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard
Graphics
Integrated Graphics Processor+Intel®Thunderbolt™4 Controller:
- 1 x VisionLINK TB connector (Intel®Thunderbolt™4/USB Type-C®port)
- 1 x Intel®Thunderbolt™4 connector (USB Type-C®port)
* The Intel®Thunderbolt™4 connectors support DisplayPort and Thunderbolt™video
outputs and a maximum resolution of 5120x2880@60 Hz with 24 bpp (via single
display output)
* Because of the limited I/O resources of the PC architecture, the number of Thunderbolt™
devices that can be used is dependent on the number of the PCI Express devices
being installed. (Refer to Chapter 1-7, "Back Panel Connectors," for more information.)
* Support for DisplayPort 1.4 version and HDCP 2.3.
Integrated Graphics Processor-Intel®HD Graphics support:
- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz
* Support for HDMI 1.4 version and HDCP 2.3.
(Graphics specications may vary depending on CPU support.)
Audio Realtek®ALC4080 codec
Support for DTS:X®Ultra
High Denition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
LAN 2 x Intel®2.5GbE LAN chips (2.5 Gbit/1 Gbit/100 Mbit)

- 11 -
Hardware Installation
Wireless
Communication
Module
Intel®Wi-Fi 6 AX200
- WIFIa,b,g,n,ac,ax,supporting2.4/5GHzDual-Band
- BLUETOOTH 5.1
- Supportfor11ax160MHzwirelessstandardandupto2.4Gbpsdatarate
* Actualdataratemayvarydependingonenvironmentandequipment.
Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* Foroptimumperformance,ifonlyonePCIExpressgraphicscardistobeinstalled,
be sure to install it in the PCIEX16 slot.
1 x PCI Express x16 slot, running at x8 (PCIEX8)
* ThePCIEX8slotsharesbandwidthwiththePCIEX16slot.WhenthePCIEX8slotis
populated, the PCIEX16 slot operates at up to x8 mode.
(The PCIEX16 and PCIEX8 slots conform to PCI Express 4.0 standard.) (Note)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
* ThePCIEX4slotsharesbandwidthwiththeM2P_SBconnector.ThePCIEX4slot
operates at up to x2 mode when a PCIe SSD is installed in the M2P_SB connector.
1 x PCI Express x1 slot
(The PCIEX4 and PCI Express x1 slots conform to PCI Express 3.0 standard.)
Multi-Graphics
Technology Support for AMD Quad-GPU CrossFire™and 2-Way AMD CrossFire™technologies
Storage Interface CPU:
- 1xM.2connector(Socket3,Mkey,type2280/22110PCIe4.0x4/x2SSD
support) (M2A_CPU) (Note)
Chipset:
- 1xM.2connector(Socket3,Mkey,type2280/22110SATAandPCIe3.0
x4/x2SSDsupport)(M2M_SB)
- 1xM.2connector(Socket3,Mkey,type2260/2280/22110PCIe3.0x4/x2
SSD support) (M2P_SB)
- 6xSATA6Gb/sconnectors
SupportforRAID0,RAID1,RAID5,andRAID10
* Referto"1-8InternalConnectors,"fortheinstallationnoticesforthePCIEX4,M.2,
and SATA connectors.
Intel®Optane™MemoryReady
USB Chipset+Intel®Thunderbolt™4 Controller:
- 2 x USB Type-C®ports on the back panel, with USB 3.2 Gen 2 support
Chipset:
- 1 x USB Type-C®port with USB 3.2 Gen 2x2 support, available through the
internal USB header
- 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
- 2 x USB 3.2 Gen 1 ports available through the internal USB header
Chipset+USB 3.2 Gen 1 Hub:
- 4 x USB 3.2 Gen 1 ports on the back panel
Chipset+USB 2.0 Hub:
- 4xUSB2.0/1.1portsavailablethroughtheinternalUSBheaders
(Note) Supported by 11th Generation processors only.

- 12 -
Hardware Installation
Internal
Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x 4-pin ATX 12V power connector
1 x CPU fan header
1 x water cooling CPU fan header
4 x system fan headers
2xsystemfan/watercoolingpumpheaders
2 x addressable LED strip headers
2xRGBLEDstripheaders
3 x M.2 Socket 3 connectors
6xSATA6Gb/sconnectors
1 x front panel header
1 x front panel audio header
1 x USB Type-C®header, with USB 3.2 Gen 2x2 support
1 x USB 3.2 Gen 1 header
2xUSB2.0/1.1headers
1 x noise detection header
1xTrustedPlatformModuleheader(FortheGC-TPM2.0SPI/GC-TPM2.0SPI
2.0 module only)
2 x temperature sensor headers
1 x Clear CMOS jumper
1 x Q-Flash Plus button
Back Panel
Connectors
1 x DisplayPort In port
1 x HDMI port
2xSMAantennaconnectors(2T2R)
2 x Thunderbolt™4 connectors (USB Type-C®port, with USB 3.2 Gen 2 support)
2 x USB 3.2 Gen 2 Type-A ports (red)
4 x USB 3.2 Gen 1 ports
2xRJ-45ports
1xopticalS/PDIFOutconnector
5 x audio jacks
I/OController iTE®I/OControllerChip
Hardware
Monitor
Voltage detection
Temperature detection
Fan speed detection
Watercoolingowratedetection
Fan fail warning
Fan speed control
* Whetherthefan(pump)speedcontrolfunctionissupportedwilldependonthefan
(pump) you install.
Noise detection
BIOS 1x256Mbitash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

- 13 -
Hardware Installation
Please visit GIGABYTE's website
for support lists of CPU, memory
modules, SSDs, and M.2 devices.
Please visit the Support\Utility List
page on GIGABYTE's website to
download the latest version of apps.
Unique Features Support for APP Center
* AvailableapplicationsinAPPCentermayvarybymotherboardmodel.Supported
functionsofeachapplicationmayalsovarydependingonmotherboardspecications.
- @BIOS
- EasyTune
- Fast Boot
- Game Boost
- ON/OFFCharge
- RGBFusion
- Smart Backup
- System Information Viewer
Support for Q-Flash Plus
Support for Q-Flash
Support for Xpress Install
Bundled
Software
Norton®Internet Security (OEM version)
cFosSpeed
Operating
System Support for Windows 10 64-bit
Form Factor ATX Form Factor; 30.5cm x 24.4cm
* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout
prior notice.

- 14 -
Hardware Installation
1-3 Installing the CPU and CPU Cooler
ReadthefollowingguidelinesbeforeyoubegintoinstalltheCPU:
•Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
•Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may
locate the notches on both sides of the CPU and alignment keys on the CPU socket.)
•Apply an even and thin layer of thermal grease on the surface of the CPU.
•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended
thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics
card, memory, hard drive, etc.
1-3-1 Installing the CPU
A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
Please visit GIGABYTE's website for details on hardware installation.
Triangle Pin One Marking on the CPU
NotchNotch
LGA1200 CPU
Alignment KeyAlignment Key
LGA1200 CPU Socket
Pin One Corner of the CPU Socket

- 15 -
Hardware Installation
B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.
•Before installing the CPU, make sure to turn off the computer and unplug the power cord from
the power outlet to prevent damage to the CPU.
•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is
inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.
Step 1:
Gently press the CPU socket lever handle down
andawayfromthesocketwithyournger.Then
completely lift the CPU socket lever and the metal
loadplate/plasticcoverwillbeliftedaswell.
Step 2:
HoldtheCPUwithyourthumbandindexngers.
Align the CPU pin one marking (triangle) with the
pin one corner of the CPU socket (or you may align
the CPU notches with the socket alignment keys)
and gently insert the CPU into position.
Step 4:
Finally, secure the lever under its retention tab to
complete the installation of the CPU.
NOTE:
Hold the CPU socket lever by the handle, not the lever base portion.
Step 3:
Once the CPU is properly inserted, carefully
replace the load plate. When replacing the load
plate, make sure the front end of the load plate
is under the shoulder screw. Then press the CPU
socket lever. The protective plastic cover may
pop off from the load plate during the process of
engagingthelever.Removethecover.(Savethe
cover properly and always replace it when the
CPU is not installed.)

- 16 -
Hardware Installation
1-3-2 Installing the CPU Cooler
RefertothestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Actualinstallationprocessmay
differdependingtheCPUcoolertobeused.Refertotheuser'smanualforyourCPUcooler.)
Step 5:
After the installation, check the back of the
motherboard. If the push pin is inserted as the
picture above shows, the installation is complete.
Step 6:
Finally, attach the power connector of the CPU
cooler to the CPU fan header (CPU_FAN) on the
motherboard.
Step 1:
Apply an even and thin layer of thermal grease on
the surface of the installed CPU.
Step 2:
Before installing the cooler, note the direction of the
arrow sign on the male push pin. (Turning the
push pin along the direction of arrow is to remove
the cooler, on the contrary, is to install.)
Step 3:
Place the cooler atop the CPU, aligning the
four push pins through the pin holes on the
motherboard. Push down on the push pins
diagonally.
Step 4:
You should hear a "click" when pushing down each
push pin. Check that the Male and Female push
pins are joined closely.
(RefertoyourCPUcoolerinstallationmanualfor
instructions on installing the cooler.)
Male
Push Pin
Female
Push Pin
The Top
of Female
Push Pin
Direction of
the Arrow Sign
on the Male
Push Pin

- 17 -
Hardware Installation
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one memory module is installed.
2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory
of the same capacity, brand, speed, and chips be used.
DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2
1-4 Installing the Memory
Readthefollowingguidelinesbeforeyoubegintoinstallthememory:
•Make sure that the motherboard supports the memory. It is recommended that memory of the same
capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
•Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
•Memory modules have a foolproof design. Amemory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
1-4-1 DualChannelMemoryConguration
This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory
isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual
Channel memory mode will double the original memory bandwidth.
The four memory sockets are divided into two channels and each channel has two memory sockets as following:
ChannelA:DDR4_A1,DDR4_A2
ChannelB:DDR4_B1,DDR4_B2
RecommandedDualChannelMemoryConguration:
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2
2 Modules - - DS/SS - - DS/SS
4 Modules DS/SS DS/SS DS/SS DS/SS

- 18 -
Hardware Installation
Notch
DDR4DIMM
ADDR4memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall
your memory modules in the memory sockets.
Step 1:
Note the orientation of the memory module. Spread the retaining clips
at both ends of the memory socket. Place the memory module on the
socket.Asindicatedinthepictureontheleft,placeyourngerson
the top edge of the memory, push down on the memory and insert it
vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place when the
memory module is securely inserted.
Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module. DDR4 and DDR3 DIMMs are not
compatible to each other or DDR2 DIMMs. Be sure to install DDR4 DIMMs on this motherboard.
1-4-2 Installing a Memory

- 19 -
Hardware Installation
1-5 Installing an Expansion Card
Readthefollowingguidelinesbeforeyoubegintoinstallanexpansioncard:
•Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
•Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
PCI Express x16 Slot
PCI Express x1 Slot
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locateanexpansionslotthatsupportsyourcard.Removethemetalslotcoverfromthechassisbackpanel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your
expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Example:InstallingandRemovingaPCIExpressGraphicsCard:
•Installing a Graphics Card:
Gently push down on the top edge of the card until
it is fully inserted into the PCI Express slot. Make
sure the card is securely seated in the slot and
does not rock.
•RemovingtheCard:
Gently push back on the lever on the slot and then lift the card straight out from
the slot.

- 20 -
Hardware Installation
B.ConnectingtheGraphicsCards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install the graphics cards on the PCIEX16 and
PCIEX8 slots.
Step 2:
Insert the CrossFire (Note) bridge connector in the CrossFire gold edge connectors on top of the cards.
Step 3:
Plug the display cable into the graphics card on the PCIEX16 slot.
Procedure and driver screen for enabling CrossFire technology may differ by graphics cards and
driver version. Refer to the manual that came with your graphics cards for more information about
enabling CrossFire technology.
1-6 SettingupanAMDCrossFire™Conguration
(Note) The bridge connector(s) may be needed or not depending on your graphics cards.
A.SystemRequirements
-Windows 10 64-bit operating system
-A CrossFire-supported motherboard with two PCI Express x16 slots and correct driver
-CrossFire-ready graphics cards of identical brand and chip and correct driver
-CrossFire (Note) bridge connector
-A power supply with sufcient power is recommended (Refer to the manual of your graphics cards for the
power requirement)
C.ConguringtheGraphicsCardDriver
After installing the graphics card driver in the operating
system, go to the AMDRADEON SETTINGS screen.
Browse to Gaming\GlobalSettings and ensure AMD
CrossFire is set to On.