GigaDevice Semiconductor GD32350R-EVAL User manual

GigaDevice Semiconductor Inc.
GD32350R-EVAL
User Manual

User Manual
GD32350R-EVAL
1 /33
Table of Contents
目录
Table of Contents ...............................................................................................................................1
List of Figures.....................................................................................................................................4
List of Tables ......................................................................................................................................5
1. Summary......................................................................................................................................6
2. Function Pin Assign....................................................................................................................6
3. Getting started.............................................................................................................................7
4. Hardware layout overview..........................................................................................................7
4.1. Power supply........................................................................................................................7
4.2. Boot option...........................................................................................................................8
4.3. LED........................................................................................................................................8
4.4. KEY........................................................................................................................................8
4.5. USART0.................................................................................................................................9
4.6. RS485....................................................................................................................................9
4.7. ADC/DAC.............................................................................................................................10
4.8. I2S........................................................................................................................................10
4.9. I2C .......................................................................................................................................11
4.10. SPI-TF CARD...................................................................................................................11
4.11. SPI-TFT LCD....................................................................................................................12
4.12. USBFS .............................................................................................................................12
4.13. CMP..................................................................................................................................13
4.14. HDMI-CEC........................................................................................................................13
4.15. TSI....................................................................................................................................13
4.16. IFRP .................................................................................................................................14
4.17. RTC..................................................................................................................................14
4.18. GD-Link............................................................................................................................15
4.19. Extension ........................................................................................................................16
4.20. MCU .................................................................................................................................17

User Manual
GD32350R-EVAL
2 /33
5. Routine use guide .....................................................................................................................17
5.1. GPIO_Runing_Led .............................................................................................................17
5.1.1. DEMO Purpose.............................................................................................................17
5.1.2. DEMO Running Result..................................................................................................17
5.2. GPIO_KeyBoard_Polling_mode........................................................................................18
5.2.1. DEMO Purpose.............................................................................................................18
5.2.2. DEMO Running Result..................................................................................................18
5.3. GPIO_KeyBoard_Interrupt_mode.....................................................................................18
5.3.1. DEMO Purpose.............................................................................................................18
5.3.2. DEMO Running Result..................................................................................................18
5.4. USART_Printf .....................................................................................................................19
5.4.1. DEMO Purpose.............................................................................................................19
5.4.2. DEMO Running Result..................................................................................................19
5.5. USART_HyperTerminal_Interrupt .....................................................................................19
5.5.1. DEMO Purpose.............................................................................................................19
5.5.2. DEMO Running Result..................................................................................................19
5.6. USART_DMA.......................................................................................................................20
5.6.1. DEMO Purpose.............................................................................................................20
5.6.2. DEMO Running Result..................................................................................................20
5.7. RS485_Test.........................................................................................................................20
5.7.1. DEMO Purpose.............................................................................................................20
5.7.2. DEMO Running Result..................................................................................................21
5.8. ADC_Conversion_Triggered_By_Timer ...........................................................................21
5.8.1. DEMO Purpose.............................................................................................................21
5.8.2. DEMO Running Result..................................................................................................22
5.9. DAC_Output_Voltage_Value..............................................................................................22
5.9.1. DEMO Purpose.............................................................................................................22
5.9.2. DEMO Running Result..................................................................................................22
5.10. Comparator_Obtain_Brightness ...................................................................................22
5.10.1. DEMO Purpose .........................................................................................................22
5.10.2. DEMO Running Result..............................................................................................22
5.11. I2C_EEPROM ..................................................................................................................23
5.11.1. DEMO Purpose.............................................................................................................23
5.11.2. DEMO Running Result..................................................................................................23
5.12. SPI_TF_Card_Block_Operation.....................................................................................24
5.12.1. DEMO Purpose .........................................................................................................24
5.12.2. DEMO Running Result..............................................................................................24
5.13. SPI_TF_Card_FATFS_Operation ...................................................................................25
5.13.1. DEMO Purpose .........................................................................................................25

User Manual
GD32350R-EVAL
3 /33
5.13.2. DEMO Running Result..............................................................................................25
5.14. SPI_TFT_LCD_Driver......................................................................................................26
5.14.1. DEMO Purpose .........................................................................................................26
5.14.2. DEMO Running Result..............................................................................................26
5.15. HDMI-CEC_HostSlaveCommunication .........................................................................27
5.15.1. DEMO Purpose .........................................................................................................27
5.15.2. DEMO Running Result..............................................................................................27
5.16. I2S_Audio_Player ...........................................................................................................28
5.16.1. DEMO Purpose .........................................................................................................28
5.16.2. DEMO Running Result..............................................................................................28
5.17. RCU_Clock_Out..............................................................................................................28
5.17.1. DEMO Purpose .........................................................................................................28
5.17.2. DEMO Running Result..............................................................................................28
5.18. PMU_sleep_wakeup .......................................................................................................29
5.18.1. DEMO Purpose .........................................................................................................29
5.18.2. DEMO Running Result..............................................................................................29
5.19. RTC_Calendar.................................................................................................................29
5.19.1. DEMO Purpose .........................................................................................................29
5.19.2. DEMO Running Result..............................................................................................29
5.20. IRInfrared_Transceiver...................................................................................................29
5.20.1. DEMO Purpose .........................................................................................................29
5.20.2. DEMO Running Result..............................................................................................30
5.21. TIMER_Breath_LED........................................................................................................30
5.21.1. DEMO Purpose .........................................................................................................30
5.21.2. DEMO Running Result..............................................................................................30
5.22. TSI_TouchKey_leds........................................................................................................30
5.22.1. DEMO Purpose .........................................................................................................30
5.22.2. DEMO Running Result..............................................................................................30
5.23. USB_Device ....................................................................................................................30
5.23.1. USBD_CDC_ACM.....................................................................................................30
5.23.2. USBD_Keyboard.......................................................................................................31
5.24. USB_Host........................................................................................................................32
5.24.1. USBH_ HID_Host......................................................................................................32
5.24.2. USBH_MSC_Host.....................................................................................................33
6. Revision history ........................................................................................................................33

User Manual
GD32350R-EVAL
4 /33
List of Figures
Figure 4-1 Schematic diagram of power supply................................................................................................7
Figure 4-2 Schematic diagram of boot option....................................................................................................8
Figure 4-3 Schematic diagram of LED function................................................................................................. 8
Figure 4-4 Schematic diagram of Key function................................................................................................. 8
Figure 4-5 Schematic diagram of USART0 function......................................................................................... 9
Figure 4-6 Schematic diagram of RS485 function ............................................................................................9
Figure 4-7 Schematic diagram of ADC/DAC function ....................................................................................10
Figure 4-8 Schematic diagram of I2S function.................................................................................................10
Figure 4-9 Schematic diagram of I2C function ................................................................................................11
Figure 4-10 Schematic diagram of SPI-TF CARD function...........................................................................11
Figure 4-11 Schematic diagram of SPI-TFT LCD function ............................................................................12
Figure 4-12 Schematic diagram of USBFS function.......................................................................................12
Figure 4-13 Schematic diagram of CMP function............................................................................................ 13
Figure 4-14 Schematic diagram of HDMI-CEC function.................................................................................13
Figure 4-15 Schematic diagram of TSI function..............................................................................................13
Figure 4-16 Schematic diagram of IFRP function............................................................................................14
Figure 4-17 Schematic diagram of RTC function............................................................................................14
Figure 4-18 Schematic diagram of GD-Link function.....................................................................................15
Figure 4-19 Schematic diagram of Extension Pin...........................................................................................16
Figure 4-20 Schematic diagram of MCU Pin..................................................................................................... 17

User Manual
GD32350R-EVAL
5 /33
List of Tables
Table 2-1 Pin assignment........................................................................................................................................6
Table 4-1 Boot configuration..................................................................................................................................8
Table 6-1 Revision history.....................................................................................................................................33

User Manual
GD32350R-EVAL
6 /33
1. Summary
GD32350R-EVAL evaluation board uses GD32F350RBT6 as the main controller. As a
complete development platform of GD32F3x0 powered by ARM® Cortex™-M4 core, the
board supports full range of peripherals. It uses mini-USB interface or AC/DC adapter to
supply 5V power. SWD, Reset, Boot, User button key, LED, I2C, I2S, USART, RS485,
TFT-LCD, HDMI-CEC, LDR, TSI, IFRP LED, IR Receiver, RTC, SPI, USB, ADC, DAC
and Extension Pin are also included. This document details its hardware schematic and
the relevant applications.
2. Function Pin Assign
Table 2-1 Pin assignment
Function
Pin
Description
LED
PC10
LED1
PC11
LED2
PC12
LED3
PD2
LED4
RESET
K1-Reset
KEY
PA0
K2-Wakeup
PC13
K4-Temper
PF7
K3-User Key
USB
PA11
USBDM
PA12
USBDP
PA9
USB VBUS
IR
PC6
IR_RX
PB9
IR_TX
I2C
PB6
I2C0_SCL
PB7
I2C0_SDA
I2S
PA4
I2S_WS
PA5
I2S_CK
PA7
I2S_DIN
PA15
MSEL
PB3
MCLK
PB5
MDIN
PA6
I2S_MCK
USART0
PA9
USART0_TX
PA10
USART0_RX
RS485
PA2
RS485_TX
PA3
RS485_RX
PA1
RS485_DIR
TSI
PB11
TSI_G5_IO0

User Manual
GD32350R-EVAL
7 /33
PB14
TSI_G5_IO3
PB13
TSI_G2_IO2
PB12
TSI_G5_IO1
PC5
TSI_G2_IO0
PB0
TSI_G2_IO1
SPI
PB3
SPI0_SCK
PB4
SPI0_MISO
PB5
SPI0_MOSI
PF5
TFT_CS
PF4
TF_CARD_CS
PC4
TFT_RESET
ADC
PC1
ADC_IN11
HDMI-CEC
PB8
CEC
COMPARATOR
PA1
COMP0_INP
DAC
PA4
DAC_OUT
3. Getting started
The EVAL Board uses mini-USB connecter or AC/DC adapter to get power, the
hardware system power is +3.3V. A mini-USB cable and a J-Link tool are necessary to
down programs. Select the correct boot mode and then power on, the LED6 will turn on,
which indicates the power supply is ready.
4. Hardware layout overview
4.1. Power supply
Figure 4-1 Schematic diagram of power supply
G
1
Vout 2 Vin
34
U4 AMS1117-3.3
E5
16V/10uF,AVX
E6
16V/10uF,AVX
GND
C20
50V/0.1uF
C21
50V/0.1uF
+3V3
LED6
LED0603
R32
470Ω
1
TP3
TP +3V3
P1
SMD1210P050TF
+5V
+U5V
5
S2
3
S
2
S1
1
4
SW1
SW-SPDT
1
3
2
CN4
DC-10B
GND
VCC
PWR
PWR

User Manual
GD32350R-EVAL
8 /33
4.2. Boot option
Figure 4-2 Schematic diagram of boot option
R18
10KΩ
1
2
3
JP4
BOOT0
GND BOOT0
+3V3
Table 4-1 Boot configuration
BOOT1
BOOT0
Boot Mode
Default
2-3
User memory
1-2
System memory
Changed by ISP
1-2
SRAM memory
4.3. LED
Figure 4-3 Schematic diagram of LED function
PC10
PC11
PC12
PC2
LED1
LED0603
LED2
LED0603
LED3
LED0603
LED4
LED0603
LED
GND
R25
470Ω
R26
470Ω
R27
470Ω
R28
470Ω
4.4. KEY
Figure 4-4 Schematic diagram of Key function
PA0
R29
10KΩ
+3V3
GND
PC13
R31
10KΩ
+3V3
GND
C19
50V/0.1uF
PF7
R30
10KΩ
+3V3
GND
C18
50V/0.1uF
KEY
K2
K-1102B
K3
K-1102B
K4
K-1102B

User Manual
GD32350R-EVAL
9 /33
4.5. USART0
Figure 4-5 Schematic diagram of USART0 function
C1+
1V+ 2
C1-
3
C2+
4
C2-
5
V- 6
T2OUT 7
R2IN 8
R2OUT
9
T2IN
10 T1IN
11
R1OUT
12 R1IN 13
T1OUT 14
GND
15 VCC 16
U5
MAX3232CSE+
+3V3
GND
C2650V/0.1uF
C2850V/0.1uF
C27
50V/0.1uF
C25
50V/0.1uF C24 50V/0.1uF
GND 1
6
2
7
3
8
4
9
5
J2
COM
GND
RS232
RS232_TX
RS232_RX
PA9
RS232_RX
RS232_TX
PA10
1
2
3
JP13
HEADER 3
PA9
RS232_TX
USB_VBUS
4.6. RS485
Figure 4-6 Schematic diagram of RS485 function
RO
1
RE
2
DE
3
DI
4GND 5
A6
B7
Vcc 8
U6
ST485ABDR
R38
120R 1
2
JP9
HEADER 2
C29
50V/0.1uF
+3V3
GND
GND
RS485_DIR
RS485_RX
RS485_TXPA2
PA3
1
2
3
JP12
HEADER 3
PA1
CMP0
RS485_DIR
RS485_DIR
RS485

User Manual
GD32350R-EVAL
10 /33
4.7. ADC/DAC
Figure 4-7 Schematic diagram of ADC/DAC function
+3V3
GND
ADC
C1
50V/0.1uF
R1
1KΩ
PC1VR1
10K
1
TP1
TP ADin
4.8. I2S
Figure 4-8 Schematic diagram of I2S function
LRCK
1
DATA
2
BCK
3
PD
4
AGND
5
HGND
6
Vcom
7
HoutR
8
SCKI 16
HoutL 9
AIN 10
Vhp 11
VCC 12
MD 13
MC 14
MS 15
U2
PCM1770 PM
NRST
GND
+3V3
E2
16V/10uF,AVX
5
4
3
2
1
J1
HeadPhone
E3
10V/220uF,AVX
E4
10V/220uF,AVX
R7
16RR8 16R
C5
50V/0.22uF
C6
50V/0.22uF
GND
C4
50V/0.1uF
E116V/10uF,AVX
GND
GND
PA4
PA7
PA5
PA6
PA15
I2S
I2S_WS
I2S_DIN
I2S_CK
I2S_MCK
MSEL
MCLK
MDIN
I2S_MCLK
I2S_MDIN

User Manual
GD32350R-EVAL
11 /33
4.9. I2C
Figure 4-9 Schematic diagram of I2C function
PB6
PB7
A0
1
A1
2
A2
3
GND
4SDA 5
SCL 6
WP 7
VCC 8
U1
AT24C02C-SSHM-T
+3V3
GND
R5
4.7KΩ
R6
4.7KΩ
C3
50V/0.1uF GND
I2C
4.10. SPI-TF CARD
Figure 4-10 Schematic diagram of SPI-TF CARD function
+3V3
+3V3
PB4
PF4
SD/LCD_SPI_CLK
SD/LCD_SPI_MOSI
D2
1D3
2CMD
3VCC
4CLK
5GND
6D0
7D1
8CD
9CN2
TF_CARD_SOCKET
GND
GND
E0
16V/10uF,AVX
SPI
R41
10KΩ

User Manual
GD32350R-EVAL
12 /33
4.11. SPI-TFT LCD
Figure 4-11 Schematic diagram of SPI-TFT LCD function
VCC
1
GND
2
TFT_CS
3
RESET
4
D/C
5
SDI(MOSI)
6
SCK
7
LED
8
SDO(MISO)
9
CN3
SPI_LCD_Interface
GND
PF5
PC4
PC3
PB4
R42
10KΩ
+3V3
1
2
3
JP10
HEADER 3
1
2
3
JP11
HEADER 3
PB3
PB5SD/LCD_SPI_CLK
SD/LCD_SPI_CLK
SD/LCD_SPI_MOSI SD/LCD_SPI_MOSI
I2S_MCLK
I2S_MDIN
C30
50V/0.1uF
+3V3
+3V3
R44
10KΩ
4.12. USBFS
Figure 4-12 Schematic diagram of USBFS function
GND
R54
47KΩ
R55
470R
R33 22R
R34 22R
PD2
E10
16V/10uF,AVX
GND
PA11
PA12
1
2
3
Q3
S8550
R37
1MΩ
C22
50V/4700pF
PWR
USB_VBUS
USB_DM
USB_DP
VBUS
1
DM
2
DP
3
ID
4
GND
5
Shield
6
USB_MiniAB receptacle
CN1
Mini_USB
+U5V
PA9

User Manual
GD32350R-EVAL
13 /33
4.13. CMP
Figure 4-13 Schematic diagram of CMP function
R22
8.2K
R23
VT9ON1
+3V3
R21
0
CMP0
COMPARATOR
4.14. HDMI-CEC
Figure 4-14 Schematic diagram of HDMI-CEC function
R24
27KΩ
+3V3
1
2
JP7
HEADER 2
GND
PB8
HDMI-CEC
4.15. TSI
Figure 4-15 Schematic diagram of TSI function
R24
27KΩ
+3V3
1
2
JP7
HEADER 2
GND
PB8
HDMI-CEC

User Manual
GD32350R-EVAL
14 /33
4.16. IFRP
Figure 4-16 Schematic diagram of IFRP function
+3V3
1
23
Q2
8050
GND
R10
1KΩ
R9
100Ω
PB9
LED5
KD-03144R
1
2
3
JP2
HS0038B
+5V
GND
GND
PC6
R11
10KΩ
C2
10V/4.7uF
R43
100Ω
IFRP
4.17. RTC
Figure 4-17 Schematic diagram of RTC function
1
2
3
JP5
Vbat select
VBAT
12 BT1
Battety
GND +3V3

User Manual
GD32350R-EVAL
15 /33
4.18. GD-Link
Figure 4-18 Schematic diagram of GD-Link function
L_USB_Ctr
C100
50V/20pF
C102
50V/20pF
Y101
HC-49S-8MHz
GND
L_NRST
+3V3
GND
R102
10KΩ
C103
50V/0.1uF
R104
10KΩ
GND
C105
50V/0.1uF
C106
50V/0.1uF
C107
50V/0.1uF
C108
50V/0.1uF
R101
1MΩ
L_OSC_IN
L_OSC_OUT
L_OSC_IN
L_OSC_OUT
L_NRST
GND
+3V3
GND
1
2
3
4
JP100
4×1P2.54
+3V3
GND
MCU SWD
Reset
L_TMS/IO
L_TDI
L_TDO/SWO
L_TCK/CLK
L_USB_DP
L_SWDIO
L_SWDCK
L_SWDIO
L_SWDCK
+3V3
L_USB_DM
BOOT0
44
NRST
7
OSC_IN/PD0
5
OSC_OUT/PD1
6
PA0-WKUP
10
PA1
11
PA2
12
PA3
13
PA4
14
PA5
15
PA6
16
PA7
17
PA8
29
PA9
30
PA10
31
PA11
32
PA12
33
PA13/JTMS/SWDIO
34
PA14/JTCK/SWCLK
37
PA15/JTDI
38
PB018
PB119
PB2/BOOT1 20
PB3/JTDO 39
PB4/JNTRST 40
PB541
PB642
PB743
PB845
PB946
PB10 21
PB11 22
PB12 25
PB13 26
PB14 27
PB15 28
PC13-TAMPER-RTC 2
PC14-OSC32_IN 3
PC15-OSC32_OUT 4
VBAT
1
VDD_1
24
VDD_2
36
VDD_3
48
VDDA
9
VSS_1 23
VSS_2 35
VSS_3 47
VSSA 8
U0
GD32F103C8T6
L_TReset
L_LED1
L_LED2
L_LED1 LED0603
L_LED2 LED0603
R109 470Ω
R110 470ΩGND
GND
R105 22R
R106 22R
R108
1MΩC104
50V/4700pF
L_USB_DM
L_USB_DP
GND
R107 1.5KΩL_USB_Ctr
VCC 1
D- 2
D+ 3
ID 4
GND 5
SHELL 6
CN100
Mini_USB

User Manual
GD32350R-EVAL
16 /33
4.19. Extension
Figure 4-19 Schematic diagram of Extension Pin
1 2
3 4
5 6
7 8
910
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
JP6
HEADER 16X2
1 2
3 4
5 6
7 8
910
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
JP8
HEADER 16X2
PA14PA15 PC10PC11 PC12PD2PB3PB4PB5PB6PB7BOOT0 PB8PB9
GND
PC13
PC14PC15
PC0
PC1
PC2
PC3PA0
PA1PA2
PF7PF6PA13PA12 PA11PA10 PA9PA8PC9PC8PC7PC6PB15PB14 PB13PB12
GND
PB11PB10 PB2PB1PB0PC5PC4PA7PA6PA5PA4PF5PF4PA3
+3V3
+3V3
EXTENTION

User Manual
GD32350R-EVAL
17 /33
4.20. MCU
Figure 4-20 Schematic diagram of MCU Pin
OSC_IN
OSC_OUT
VBAT
NRST
BOOT0
+3V3 GND
VDDA VSSA
PB11
PB10
PC5
PC4
PF5
PF4
PA3
PC10
PC11
PC12
PD2
PB8
PB9
PC13
PC14
PC15
PF7
PF6
PB15
PB14
PB13
PB12
BOOT0
60
NRST
7
OSC_IN/PF0
5
OSC_OUT/PF1
6
PA0
14
PA1
15
PA2
16
PA3
17
PA4
20
PA5
21
PA6
22
PA7
23
PA8
41
PA9
42
PA10
43
PA11
44
PA12
45
PA13/SWDIO
46
PA14/SWCLK
49
PA15
50
PB026
PB127
PB228
PB355
PB456
PB557
PB658
PB759
PB861
PB962
PB10 29
PB11 30
PB12 33
PB13 34
PB14 35
PB15 36
PC08
PC19
PC210
PC311
PC424
PC525
PC637
PC738
PC839
PC940
PC10 51
PC11 52
PC12 53
PC13 2
PC14-OSC32_IN 3
PC15-OSC32_OUT 4
PD2
54
VBAT
1
VDD_2
32
PF7
48
VDD_1
64
PF5
19
VDDA/VREF+
13
VSS_2 31
PF6
47
VSS_1 63
PF4
18
VSSA/VREF- 12
U3
GD32F350RxT6
PA0
PA1
PA2
PA7
PA6
PA5
PA4
PA13
PA12
PA11
PA10
PA9
PA8
PA14
PA15
PB2
PB1
PB0
PB6
PB7
PB3
PB4
PB5
PC1
PC0
PC2
PC3
PC9
PC8
PC7
PC6
5. Routine use guide
5.1. GPIO_Runing_Led
5.1.1. DEMO Purpose
This Demo includes the following functions of GD32 MCU:
Learn to use GPIO for controlling the LED
Learn to use SysTick to generate 1ms delay
GD32350R-EVAL board has four LEDs. The LED1, LED2, LED3 and LED4 are
controlled by GPIO. This demo will show how to light the LEDs.
5.1.2. DEMO Running Result
Download the program <01_GPIO_Runing_Led> to the EVAL board, four LEDs will turn
on one by one from LED1 to LED4 every 200ms, and then turn off together. 200ms later,

User Manual
GD32350R-EVAL
18 /33
the four LEDs work like previous again.
5.2. GPIO_KeyBoard_Polling_mode
5.2.1. DEMO Purpose
This Demo includes the following functions of GD32 MCU:
Learn to use GPIO control the LED and the KEY
Learn to use SysTick to generate 1ms delay
GD32350R-EVAL board has four keys and four LEDs. The four keys are Reset key,
Tamper key, User key and Wakeup key. The LED1, LED2, LED3 and LED4 are
controlled by GPIO.
This demo will show how to use the Tamper key to control the LED2. When press down
the User Key, it will check the input value of the IO port. If the value is 0, wait for 50ms.
Then check the input value of the IO port again. If the value is still 0, indicates that the
button is pressed down successfully, and light the four LED2.
5.2.2. DEMO Running Result
Download the program <02_GPIO_KeyBoard_Polling_mode> to the EVAL board, first of
all, all the LEDs will be flashed once for test. Then press down the Tamper Key, LED2
will be turned on. Press down the Tamper Key again, LED2 will be turned off.
5.3. GPIO_KeyBoard_Interrupt_mode
5.3.1. DEMO Purpose
This Demo includes the following functions of GD32 MCU:
Learn to use GPIO to control the LED and the KEY
Learn to use EXTI to generate external interrupt
GD32350R-EVAL board has four keys and four LEDs. The four keys are Reset key,
Wakeup key, User key and Tamper key. The LED1, LED2, LED3 and LED4 are
controlled by GPIO.
This demo will show how to use EXTI interrupt line to control the LED2. When press
down the Tamper Key, it will produce an interrupt. In the interrupt service function, the
demo will toggle LED2.
5.3.2. DEMO Running Result
Download the program <03_GPIO_KeyBoard_Interrupt_mode> to the EVAL board, first
of all, all the LEDs will be flashed once for test. Then press down the Tamper Key, LED2

User Manual
GD32350R-EVAL
19 /33
will be turned on. Press down the Tamper Key again, LED2 will be turned off.
5.4. USART_Printf
5.4.1. DEMO Purpose
This Demo includes the following functions of GD32 MCU:
Learn to use GPIO: the Tamper key control the LED
Learn to retarget the C library printf function to the USART
5.4.2. DEMO Running Result
Jump JP13 to USART, then download the program <04_USART_Printf> to the EVAL
board and run. This implementation outputs “USART printf example: please press the
Tamper Key” on the hyperterminal using COM. Press the Tamper key, serial port will
output “USART Printf Example”. The information via a serial port output as following.
5.5. USART_HyperTerminal_Interrupt
5.5.1. DEMO Purpose
This Demo includes the following functions of GD32 MCU:
Learn to use the EVAL_COM transmit and receive interrupts to communicate with
the hyperterminal
5.5.2. DEMO Running Result
Jump JP13 to USART, then download the program <05_USART_HyperTerminal_
Interrupt> to the EVAL board and run. Firstly, all the LEDs are turned on and off for test.
Then, the COM sends the tx_buffer array (from 0x00 to 0xFF) to the hyperterminal and
waits for receiving data from the hyperterminal that you must send. The string that you
have sent is stored in the rx_buffer array. The receive buffer have a BUFFER_SIZE
bytes as maximum. After that, compare tx_buffer with rx_buffer. If tx_buffer is same with
rx_buffer, LED1 and LED2 are turned on, LED3 and LED4 are turned off. Otherwise,
LED1 and LED2 are turned off, LED3 and LED4 are turned on.
The information via a serial port output as following: