GL Technologies GL-XE300C4 Installation instructions

Puli / GL-XE300C4, GL-XE300C6
4G LTE Wireless Router
Let’s get
started.
Set up Router
Visit http://192.168.8.1 in your
browser to set up your router; start
by choosing your preferred language.
Insert Cards & Power On
When powered up, your GL-XE300 router will
broadcast Wi-Fi signal with the SSID:
GL-XE300-xxx.
Hot plug for TF card and
Nano SIM card are not
supported for this router.
Plug the cable connecting
to your computer into LAN port
or
Default password is goodlife
GL-XE300-xxx
Search the SSID and connect to it
Connect to the Wi-Fi called
GL-XE300-xxx, and input the default
Wi-Fi password goodlife, which is also
printed on the bottom of the router.
Connect via Wi-Fi
SETTING UP
Connect via LAN
After Inserting cards, turn on the router
by pressing the power button
Nano SIM Card
(Optional)
TF Card /
Micro SD Card
(Optional)

https://docs.gl-inet.com/en/3/
Technical Supports
For more detailed and updated instructions, please visit our website
docs.gl-inet.com
For further questions, you can get help from the following ways:
- Email to [email protected]
- Message us on our Facebook: facebook.com/gl.inet.wifi/
- Post questions in our forum: forum.gl-inet.com
- Ask professionals in other forums e.g. OpenWrt, LEDE or other professional
websites
Repair / Reset
If you cannot access the web-based setup page or cannot
connect to the router, you can press the Reset button:
Press and hold for 3 seconds, and then release to
repair your network.
Press and hold for 10 seconds, and then release to
reset the router to factory settings. All user data will
be cleared.
SUPPORT WARRANTY
We provide one year limited warranty for routers and 3-month limited warranty for accessories. Extra warranty may
apply according to the local law in which the product purchase took place.
Highly recommend using the included 5V/2A power adapter.
Any damage to the router caused by not following the instructions will render this warranty null and void.
Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void.
Issues caused by the use of third-party firmware may not get official support from us.
Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in
the water or on the ground will render this warranty null and void.
Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without
further notice.
Keep your device within the recommended operating temperature (0°C to 40°C). Recommend storage temperature for
your device is between -20°C to +45°C. Please note lower or higher temperatures may cause damage to the device.
To avoid battery or device failure, do not remove or replace the non-removable battery.
The device should shut down due to overheating (in the event the battery temperature exceeds 60°C).
GL Technologies (Hong Kong) Limited
Unit 203, 2/F, Building 19W, 19 Science Park West
Avenue, Hong Kong Science Park,
Pak Shek Kok, N.T., Hong Kong
Hong Kong Office
Shenzhen Guanglianzhitong Tech Co., Ltd.
Room 305 - 306, Skyworth Digital Building, Shiyan Street,
Baoan District, Shenzhen, China, 518000
( [phone] )
Shenzhen Office
The Equipment named above is confirmed to comply with the requirements setout in the European Council Directive on the
Approximation of the Laws of the Member States relating to RED (2014/53/EU). The equipment passed the test which was
performed according to the following European standards:
EN 301 489-1 V2.2.3；EN 301 489-17 V3.2.2; EN 301 489-52 V1.1.0
EN 300 328 V2.2.2; EN 301 511 V12.5.1;
EN 301 908-1 V11.1.1; EN 301 908-2 V11.1.2; EN 301 908-13 V11.1.2;
EN50566:2017& EN62209-2:2010; EN62368-1:2014+A11:2017
This product uses WiFi 2.4GHz Operating Frequency
is 2400~2483.5MHz;
The Product comply with Directive 2011/65/EU and
its amendment directive 2015/863/EU (Rohs2.0)
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
3. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement.
Radiation Exposure Statement
This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that
were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: GL-XE300C4 and GL-XE300C6 have
also been tested against this SAR limit.
ver. 20201126
Power port
WAN Ethernet port
LAN Ethernet port
Battery
3G/4G
Wi-Fi
LAN
WAN
Power
USB2.0 port
Power button
Reset button
MicroSD Card
(Optional)
Nano SIM Card
(Optional)