Global Machinery Company 300 Piece User manual

Removing/re-installing drawers
To remove:
1. Pull the drawer out as far as it can go.
2. With your index fingers, push the
two clips on the slide rails inwards as
shown.
3. Pull the drawer and its slide rails fully
out of the case.
To re-install:
1. Align the slide rails of the drawer with
the tracks in the case.
2. Push the slide rails into the case. You
will hear a click as the clips engage.
3. Fully push the drawer into the case.
300 Piece
Drill & Bit Super Set
300PCE
030117 300PCE ED2
Global Machinery Company
16 Scammel Street, Campbellfield
Victoria, Australia 3061
Tel: [phone]
Fax: [phone]
Customer Helpline
1300 880 001 (Australia)
0800 445 721 (New Zealand)