Godlike Eventide H9000 User manual

Instruction Manual
Revision 1.00
Stereo Summing Mixer with Drive (6)

ii
©2022 Godlike Productions. All rights reserved. .Eventide®, Harmonizer® are trademarks of Eventide Inc.. All other trade-
marks and copyrights are property of their respective companies. Product features and specications are subject to change
without notice.
You may legally print up to two (2) copies of this document for personal use. Commercial use of any copies of this document
is prohibited. Godlike Productions retains ownership of all intellectual property represented by this document.
Godlike Productions Contact
All Customers:
Godlike Productions
PO Box 1520
Midland DC, WA, 6936, AUSTRALIA
Tel: [phone]
Fax: [phone]
Email: [email protected]
Caution
Ensure you have backed up all algorithms and other data of your H9000 prior to use of this product. You
use these algorithms, chains, presets, sessions and/or other content entirely at your own risk and to all
extents allowable under the law of Western Australia, Godlike Productions is not liable for loss of damage,
direct, consequential or otherwise.
https://godlike.com.au
[email protected]
https://www.facebook.com/GodlikeAustralia
www.twitter.com/GodlikeAust
https://www.youtube.com/GodlikeAu

Getting Started
1-1
Getting Started
This manual is for a custom algorithm for the Eventide H9000 available at https://godlike.
com.au/index.php?id=420. The Stereo Summing Mixer with Drive algorithm can be
downloaded either as an algorithm that you can import from a USB drive (FAT32 formatted)
onto your H9000 from the front panel, via Emote, or that can be uploaded via VSIG 3.3.3
or later.
There will also be a copy of this manual in PDF format. If you lose your copy of the les,
please contact us at https://godlike.com.au/index.php?id=contact and we will be happy to
send you another copy, or re download the algorithm from the link above. This manual will
be available within the zip le.
Installation and Activation
Method 1 - Install from USB
• Unzip the Algorithm and any presets. Copy Stereo Summing Mixer w Drive
6_1940596699.9ka as well as the .9kp les to your USB drive and insert into your H9000.
• Long press the front panel Save/Import button; the Load Options screen will appear.
• Use the cursor up/down buttons or the wheel to navigate to Algorithms and press the
Enter Key.
• Use the cursor up/down keys or wheel to select the Stereo Summing Mixer w Drive
algorithm and then press the SELECT Key.
• If you do not wish to load presets, then you can use this algorithm as is. If you wish
to use the presets, you will need to repeat this proceedure until this algorithm appears
as algorithm 10117. Copies at lower numbers can be safely deleted using Emote (see
below).
• Onces 10117 is installed, open the .9kp les from your USB drive using the same
procedure.

Getting Started
1-2
Method 2 - Install from Emote
• Unzip the Algorithm and any Presets.
• In Emote, select Algorithm -> Import
• Navigate to the unzipped .9ka le and press open.
• If you do not wish to load presets, then you can use this algorithm as is. If you wish to
use the presets, you will need to repeat this proceedure until this algorithm appears as
algorithm 10117.
• You can safely delete lower numbered algorithms used to bump this to 10117 by right
clicking on the lower numbered algorithm and selecting Delete. Continue doing this
until the only copy of Stereo Summing Mixer w Drive 6 is the one loaded into slot
10117.
• To load the presets select Preset and then Open. Navigate to the .9kp preset les and
press Open.
Method 3 - Install using VSIG
• Unzip the Stereo Summing Mixer w Drive 6.sig2 le.
• Open this le within VSIG
• Ensure that VSIG is connected to your H9000
• Select the Upload Button

Getting Started
1-3
• Select Algorithm Location and type “10117” into the text box. Press Send.
• Presets cannot be loaded via VSIG. Install these either from Emote or from the front
panel via USB.

Getting Started
1-4
Setting Things Up
The diagram below shows the signal ow of this algorithm.
Stereo Input Drive Mix Level Stereo
Output
Stereo Input Drive Mix Level
...
Saturation Type
Drive 1
Drive 4
Gain 1
Gain 4
Saturation Type selects the saturation algorithm for all drive stages. This can be Hard Clip,
Cubic or progressively more complex algorithms up to 19th Order. This acts essentially as
a soft clipper. As drive gets higher and the signal approaches clipping, this will “gracefully”
push this towards clipping. Hard clip is not graceful. Use it for the nasty stuff.
Each stereo input has a dedicated drive control (0-100%) and a dedicated gain control (-100 -
0dB). Overall mix should be done with the gain control.
The selection of which inputs and outputs should be done as per the H9000 user manual.
This is dependent on your own studio conguration.