Goscam GP-723 User manual

0

1
CONTENTS
Part 1.GP-723 system requirements...............................................................................2
Part 2.GP-723 driver installation.....................................................................................2
Part 3.Microsoft DirectX9 installation..........................................................................7
Part 4. Goscam software installation..........................................................................10
Part 5. Goscam Initial System Settings.....................................................................14
Part 6. Goscam widget introduction............................................................................16
Part 7.Using Goscam..........................................................................................................20

2
Part 1. GP-723 system requirements
System requirements:
zMicrosoft Windows 2000 / Windows 2000 server /Windows XP SP2
zCPU: Pentium Ⅳ1.5GHz or better
zMemory: upwards of 128MB
zVGA graphic card upwards of 32MB
zSound card
zCD-ROM
zUSB 2.0 port
Caution: the product is only suitable for PC with USB 2.0 port. It won’t work when
connecting with PC with USB 1.1 or previous version. If your want to connect it
with PC with USB 1.1, you should install a PCI→USB 2.0 commutator for
conversion.
Part 2. GP-723 driver installation
1．Please insert the installation CD into the CD-ROM driver,
2．then you will see the screen below.：

3
3．Connect GP-723 to your PC as picture 1, then there is a “Found New Hardware” hint at
the right and bottom edge of the PC screen as picture 2:
Picture 1
Picture 2
4．“Found New Hardware Wizard” window pops up. Choose the second option and click
Next to continue.

4
5. Search and Installation window pops up as follow, choose “Search removable
media(floppy, CD-ROM.)”and “include this location in the search;”
6. Click Next, then wait for wizard searching window pops up as follows:

5
7. A guide window pops up as follows, click“Continue anyway”to continue.
8. document copy window pops up as follows:

6
9. Click Finish to finish installing.
Note: If the USB port in your computer is USB 1.1, the driver installation will not be
finished, and the cannot start this hardware window will appear as follows:

7
Part 3. Microsoft DirectX9 installation
If you have not install DirectX9 in your system, you have to install it; and you can
skip this part if DirectX9 has been installed before.
1．Back to the installation screen：

8
2．Click DirectX 9, pop up installing Microsoft(R) DirectX(R) window as follows. Choose “I
accept the agreement “and click Next to continue.
3．The DirectX Setup screen appears as follows, click Next to continue.

9
4．The Progress screen appears as follows, start DirectX 9 installation.
5．Installation has been completed.