GRAMOVOX Bluetooth Gramophone 2.0 User manual

BLUETOOTH
GRAMOPHONE 2.0
USER MANUAL

THANK YOU
FOR PURCHASING THE GRAMOVOX
BLUETOOTH GRAMOPHONE 2.0.
At Gramovox we’re dedicated to reimagining vintage
design with modern technology. With Gramophone
2.0 you can stream music through a speaker horn
and experience full-range sound. Enjoy!
CHEERS,
THE GRAMOVOX TEAM

TABLE OF
CONTENTS
1 Equipment List
2 Packaging
3 Assembly
4 Controls
5 How to Use
6 Using the Auxiliary Input
7 Sound Cues
8 Light Cues
9 Charging
9 Maintainance
10 Detailed Specifications

1
EQUIPMENT
LIST
1 Steel Horn
1Wood Base
16ft micro-USB cable
1 AC Power Adapter
14ft 3.5mm Audio Cable
SYMBOLS
!
Dangerous Voltage
Caution

2
PACKAGING
The packaging your Bluetooth Gramophone 2.0
arrives in should be kept for storage of the product.
This packaging is also required to process a return or
service request, if needed. See the diagram below
for instruction on how to re-pack your product.

3
ASSEMBLY
1. Insert horn tip into wood base bushing.*
2. Match horn tip with bushing notch.
3. Gently rest horn in wood base.
NOTE: Use caution when moving the product. Do not attempt to lift the
Bluetooth Gramophone 2.0 by the steel horn, as the horn does not lock
into the wood base. Doing so may result in injury to yourself or others and/
or damage to the product.
* You will find a small amount of white material (polyfill) inside the neck
of the horn. Please leave this in place, as it improves the acoustics of the
horn.

EB C DA
4
CONTROLS
On the back of the wood base:
(A ) On/O switch
(B) Micro USB port
(C) LED Battery indicator light
(D) Recessed Reset button
(E) 3.5mm auxiliary input

5
HOW TO USE
1. Power on the Bluetooth Gramophone 2.0 by switching
the “On/O” switch to “On”.
2. Ensure that Bluetooth is enabled on your mobile device or
computer.
3. When prompted, select “Gramovox” to pair. It may take
up to a minute to synchronize.
4. To transfer pairing to another device, simply unpair from
“Gramovox” in your Bluetooth Settings and proceed with
the steps above to pair a new device.
NOTE:If you are having trouble pairing, reset the Gramophone by pressing the reset
button using a small tool (e.g. a paper clip) and follow the steps above again. For
troubleshooting suggestions, please email [e-mail] or visit
www.gramovox.com/support

6
USING THE AUXILIARY
INPUT
1. Power on the Gramophone by pressing the “On/
O” switch to “On”.
2. Connect the auxiliary cable to the Gramophone
by plugging it into the 3.5mm audio jack on the
back of the wood base.
3. Plug the other end of the auxiliary cable into the
source device.
4. Begin playback of the audio on your source
device.
5. You should now hear audio playing through the
Gramophone.