Gravely Pro-Stance 36 CARB Owner's manual

Owner/Operator Manual
Manuel du Propriétaire/Utilisateur
04596200A •5/14
Printed in USA
ENGLISH
FRANÇAIS
E10
The use of any gasoline exceeding 10% ethanol (E10) or
10% MTBE will void the product warranty.
L’utilisation d’une essence contenant plus de 10%
d’éthanol (E10) ou de 10% de MTBE annulent la garantie.
Models
994119 – Pro-Stance 36
(SN 000101 +)
994120 – Pro-Stance 36 CARB
(SN 000101 +)
Pro-Stance 36
™

EN - 2
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Controls And Features . . . . . . . . . . . . 13
Operation . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance Schedule . . . . . . . . . . . . 21
Service And Adjustments . . . . . . . . . . 23
Storage . . . . . . . . . . . . . . . . . . . . . . . . . 38
Troubleshooting. . . . . . . . . . . . . . . . . . 39
Accessories . . . . . . . . . . . . . . . . . . . . . 40
Service Parts . . . . . . . . . . . . . . . . . . . . 40
Specifications . . . . . . . . . . . . . . . . . . . 41
Warranty . . . . . . . . . . . . . . . . . . . . . . . . 42
MANUALES EN IDIOMAS
DIFERENTES DEL INGLES
Puede obtener manuales en
idiomas diferentes del inglés en su
distribuidor. Visite a su distribuidor
o vaya a www.ariens.com para
obtener una lista de idiomas
disponibles para su equipo.
También puede imprimir manuales
en idiomas diferentes del inglés
descargándolos gratuitamente de
nuestra página Web:
http://www.ariens.com
THE MANUAL
Before operating unit, carefully and
completely read your manual. The contents
will provide you with an understanding of
safety instructions and controls during normal
operation and maintenance.
ENGINE MANUAL
The engine on this unit is covered by a
separate manual specific to the engine. This
manual is included in the literature package
that shipped with the unit. Refer to this
manual for engine service recommendations.
If the engine manual is not available, contact
the engine manufacturer for a replacement
manual.
MODEL AND SERIAL NUMBERS
When ordering replacement parts or making
service inquiries, know the Model and Serial
numbers of your unit.
Numbers are located on the product
registration form in the unit literature
package. They are also printed on a serial
number label on your unit (see Figure 1).
• Record unit model and serial numbers
here.
• Record engine model and serial
numbers here.
PRODUCT REGISTRATION
The AriensGravely dealer should register the
product at the time of purchase. Registering
the product helps the company process
warranty claims or contact you with the latest
service information. Claims meeting
requirements during the limited warranty
period will be honored, whether or not the
product registration card is returned with
proof of purchase.
Customer Note: If the Dealer does not
register your product, please fill out, sign and
return the product registration card to Gravely
or go to www.gravely.com.
TABLE OF CONTENTS
INTRODUCTION
Figure 1
1. Unit Model & Serial Number Label
1

EN - 3
UNAUTHORIZED REPLACEMENT
PARTS
Use only Gravely replacement parts. The
replacement of any part on this unit with
anything other than an Gravely authorized
replacement part may adversely affect the
performance, durability and safety of this unit
and may void the warranty. AriensGravely
disclaims liability for any claims or damages,
whether warranty, property damage, personal
injury or death arising out of the use of
unauthorized replacement parts.
NOTE: A parts manual may be downloaded
from www.gravely.com.
DELIVERY
Customer Note: If this product was
purchased without complete assembly and
instruction by a retailer, it is your
responsibility to:
• Read and understand all instructions
in this manual. If you do not
understand or have difficulty following
the instructions, contact your nearest
AriensGravely Dealer for assistance.
NOTE: To locate your nearest Gravely
Dealer, go to www.gravely.com.
Before Operating Unit:
1. Make sure all assembly has been
properly completed.
2. Understand all Safety Precautions
provided in the manuals.
3. Review control functions and operation
of the unit. Do not operate the unit
unless all controls function as described
in this manual.
4. Review recommended maintenance and
adjustments.
5. Review Limited Warranty policy.
6. Fill out a product registration card and
return it to Ariens Company or register
the product at www.gravely.com.
DISCLAIMER
AriensGravely reserves the right to
discontinue, change and improve its products
at any time without notice or obligation to the
purchaser.
The descriptions and specifications contained
in this manual were in effect at printing.
Equipment described within this manual may
be optional. Some illustrations may not be
applicable to your unit.
WARNING: Improper assembly or
adjustments can cause serious
injury.

EN - 4
Read these safety rules and follow them
closely. Failure to follow these rules could
lead to loss of control of unit, severe personal
injury or death to you or bystanders or result
in damage to property or the machine.
Safety Alert Symbols
SIGNAL WORDS
The safety alert symbols above and signal
words below are used on decals and in this
manual.
Read and understand all safety messages.
1. Danger
2. Warning
3. Caution
4. Notice
NOTICE: Indicates information or procedures
that are considered important but not hazard
related. If not avoided property damage could
result.
5. Important
IMPORTANT: Indicates general reference
information worthy of special attention.
SAFETY DECALS
This cutting machine is capable of amputating
hands and feet and throwing objects. Failure
to observe the following safety instructions
could result in serious injury or death.
The safety decals on your machine are visual
reminders of the important safety information
found in this manual. All messages found on
your unit must be fully understood and
carefully followed. Safety decals found on the
machine are explained below.
Always replace missing or damaged safety
decals. Replacement decals can be found in
the parts manual for your machine and
ordered from your dealer.
Refer to Figure 2 for Safety Decal locations.
1. Safety Decal Identification
SAFETY
WARNING: This cutting machine is
capable of amputating hands and
feet and throwing objects. Failure to
observe the safety instructions in the
manuals and on decals could result
in serious injury or death.
These are safety alert
symbols. They mean:
• ATTENTION!
• YOUR SAFETY IS
INVOLVED!
When you see this symbol:
• BECOME ALERT!
• OBEY THE
MESSAGE!
DANGER: Indicates an
IMMINENTLY HAZARDOUS
SITUATION! If not avoided, WILL
RESULT in death or serious injury.
WARNING: Indicates a
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, COULD
RESULT in death or serious injury.
CAUTION: Indicates a
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY
RESULT in minor or moderate
injury. It may also be used to alert
against unsafe practices.
MAX. FILL
<20°
P
1
2
34
5
Figure 2
2
4

EN - 5
2. Safety Decal Description
1. Danger!
DANGER!
Read Owner/Operator
Manual. Allow operation
only by properly trained
adult, never children.
Never direct discharge
toward other people.
Thrown objects can
cause injury.
Operating on slopes may
cause the unit to tip
unexpectedly. Do not tip
mower while operating
the unit. Mow across
slopes, not up and down.
Keep children and others
away from unit while
operating.
Look down and behind
before and while
backing.
DO NOT operate on
slopes over 20°. This
maximum degree of
operation is without
attachments.
DO NOT operate on
slopes over 10° when
operating with
attachments.
<20°
Read manual, set
parking brake, remove
key and remove spark
plug before you adjust
or repair unit.
2. Danger!
Discharge Hazard –
NEVER direct discharge
toward people, pets or
property. Thrown objects
can cause injury or
damage.
Amputation Hazard –
NEVER stick hands or feet
under deck or shielded
areas.
Shut off engine, remove
key, and read manual
before servicing or making
adjustments to unit.
Keep children and others
away from unit while unit is
in operation.
P