Great Gazebo 4FT STAND User manual

3) Align counter velcro side down and press down firmly to secure.
4) Assemble the Top Frame as shown in the diagram, paying special attention to
positioning of each distinctive part.
5) Place assembled top ( ) onto the two vertical support poles ( ).
6) Place the vinyl top onto the assembled Top Frame and snap into place.
7) Attach the Top Frame to the Bottom Frame by lifting the vertical support
poles and inserting into the frame sockets labeled ( ).
8) Snap the vinyl skirt onto the bottom frame, starting from one end.
Setup
This Assembly requires two or more people
1) Position the left and right sides of the Bottom Frame with snaps facing outward
and connect together by inserting the pipe with two pieces of velcro( ) into the
top sockets on the front of the booth and the other without velcro ( ) into the
bottom sockets with buttons snapping into the button holes.
2) Attach the top counter cross brace with two pieces of velcro( ) into sockets
found near the back of the booth making sure the buttons snap into the button
holes.
4FT Stand
assembly instructions
bottom frame
top frame

Please contact The Great Gazebo, Inc. with
any questions regarding the assembly or
care of your 6 Foot House.
EMAIL » [e-mail]
PHONE » 800.962.2767 or 517.625.2011
CONTACT
Clean with soap and water. For stronger stains use a mild abrasive
household cleaner such as Clorox Soft Scrub and wipe afterwards
with water.
Do not set items on the under counter shelf that will bulge or spill
on the skirt. Center heavy items over the cross brace. Slide the cross
brace towards the center legs for maximum support.
Counter & Shelf Care
Clean with soap and water. For stronger stains use a mild abrasive
household cleaner such as Clorox Soft Scrub and wipe afterwards
with water. Do not use dry abrasive cleaners. This will scratch the
PVC finish.
Clean any dirt build-up on the inside of the fittings and outside of
the pipe ends. This will make it easier for insertion when
assembling and removal when disassembling.
PVC Frame Care
WARNING! Do not apply adhesive tape of any kind to the
surface of printed vinyl. Doing so will damage the printing
and WILL void the warranty.
When storing vinyl, make sure it is completely dry to prevent
mold and mildew.
Carefully roll top and skirt vinyl (do not wad up) to avoid creases
and wrinkles.
Avoid placing heavy items on top of vinyl. Proper care will help the
vinyl look good for years.
Clean the outside of the vinyl with soap & water. Vinyl
preservatives extend the life of the vinyl. Do not scrub printed
custom graphics.
Avoid letting the cloth backing on the vinyl get dirty or stained. If
it gets dirty, clean with warm soap and water and let it dry
thoroughly before storing.
Do not fold the frame while the skirt is still snapped on. If the vinyl
is cold it will be tight when snapping to the frame.
When unsnapping hold near the snap and pull straight. Do not yank
or pull from a distance.
Vinyl care
Lay the included counter case flat. Insert
the 4 Foot Stand counter in counter case
with Top and Bottom frame pieces.
Counter
Storage & transport
FIG. C
Disassemble the Stand Top
Frame and Bottom Frame and
place the separated parts into the
counter bag. (FIG C).
Frame
Storage & transport
FIG. B
FIG. A
To store the 4 Foot Stand Skirt: While in an indoor location with
a clean, dry floor, roll the skirt on the floor with the vinyl side out
and the cloth side in (FIG. A). Otherwise, to keep the 4 Foot Stand
Skirt off of the ground,
simply roll the skirt
with the vinyl side in
as you are unsnapping
the skirt from the
bottom frame (FIG. B).
CAUTION! Do not drag
vinyl on ground. Severe
abrasion will damage
the vinyl and graphics.
To store the 4 Foot Stand Top : While in an indoor location with a
clean, dry floor, roll the top on the floor with the vinyl side out and
the cloth side in. Proceed to simply roll the top with the vinyl side in
until you reach the end.
Store the vinyl
Top and Skirt in
the included
drawstring bag.
Vinyl
Storage & transport
Thank you for purchasing a Great Gazebo, Inc. product. We have
used the highest quality materials and manufacturing standards.
To ensure that you obtain the best possible results, please read
these instructions thoroughly and save for future reference.
Product care instructions