Greenleaf GL-H02 User manual

2MP FHD 1080P Digital Camera and Portable WiFi(P2P) DVR
Model: GL-H02
[Digital Camera Description]
[Put on DIY Lens Cover Botton]
1)Lens
2)Mic
3)Special Micro USB
a)2MP Digital Camera
b)Button & Screw Kit
c)Double Coated Tape
d)DIY Lens Cover Button

[WiFi DVR Description]
1)Battery Pack
2)Battery Lock Switch
3)Controller
4)Green LED - Charge
5)Red LED - Rec
6)Orange LED - WiFi
7)Blue LED - Power
8)Camera in Port
9)Power/WiFi on & off Button
10)REC on/off Button
11)TF slot
12)DC 5V2A in Jack
13)Reset key
14)USB Port
15)WiFi Default key

[Install and Remove Battery]
[Battery Charging]
●Solid green LED - the device is charging.
●Green LED goes off - the device is fully charged.
[Connecting camera to WiFi DVR]
[Connect the wired controller to the DVR]
●Solid Green LED on Controller - the controller is connected.
●Solid Red LED on Controller - the device is recording.

[Operation]
Power ON: Press Power/WiFi 3 seconds (Blue LED), Wait 40-60 seconds to enter standby.
REC: With device to enter standby, Press REC to start(Red LED) or stop recording.
WiFi: With device to enter standby, Press Power/WiFi to turm on/off WiFi (Orange LED).
Power OFF: With no ongoing recording, Press Power/WiFi 3 seconds.
Reset: When the device functions abnormally, Press Reset key.
Restore default WiFi password: Press WiFi Default key for 4 seconds.
Restore default setting: Press WiFi Default key for 10 seconds.
●Solid Blue LED - Power on
●Solid Red LED - Recording on
●Blinking Orange LED - Device searching for WiFi connection
●Solid Orange LED - Device is connected to WiFi
The device powers off itself when memory card is full.
Made in TAIWAN
[Exhibition center] GREENLEAF Enterprise Co., Ltd.
[Address] No. 388, Chung-Hsiao E. Rd.,Sec6, Taipei City, Taiwan,R.O.C.
[E-Mail][e-mail]