
SAFE-Trak 1. INTRODUCTION AND PURPOSE 1-1
INTRODUCTION
This manual explains the proper operation of your machine. Read these instructions
thoroughly before operating and maintaining the machine. Failure to do so could result in
personal injury or equipment damage. Consult your GreenMech supplier if you do not
understand the instructions in this manual.
CAUTION! This symbol indicates important safety messages in this
manual. When you see this symbol, be alert to the possibility of injury to
yourself or others, and carefully read the message that follows.
We recommend that you keep this manual with the machine in the box provided. Note
here the serial number and quote it in any communications. This is important when
ordering spares. Remember to include all numbers and letters.
Serial Number
STC150
(STC16-23, 19-28
similar)
Serial
Number
STC220
Serial Number...................
Write in the number!
This manual covers the following engine driven self-propelled SAFE-Trak models.
ECO STC150MT35, Arborist STC16-23, Arborist STC19-28MT50, ChipMaster
STC220MT55
If in doubt, always quote the serial number in any communications. Where instructions are
significantly different between models, the section may be designated with a letter a or b.
(for example: 6.14a)
The information in this manual is correct at the time of publication. However, in the
course of development, changes to the machine specification are inevitable. Should you
find any information to vary from the machine in your possession please contact your
GreenMech dealer for up to date information.
The manual may contain standard and optional features and is not to be used as a
machine specification.
PURPOSE
CAUTION! This machine is designed solely to chip wood and must not be
used for any other purpose. The machine should only be used by trained
operators who are familiar with the contents of this instruction manual. It is
potentially hazardous to fit or use any parts other than genuine GreenMech
parts. These Wood Chippers are for Off Highways use only. GreenMech
Ltd disclaims all liability for the consequences of such use, which in addition voids the
machine warranty.
©GreenMech Ltd 1-1 05/06