Grizzly G0871 User manual

For questions or help with this product contact Tech Support at [phone] or [e-mail]
MODEL G0871
ROLLER STAND FOR G0869
BENCHTOP TABLE SAW
INSTRUCTIONS
COPYRIGHT © FEBRUARY, 2019 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 01/19) #WK20229 PRINTED IN TAIWAN
Introduction
Model G0871 Roller Stand allows you to quickly
and easily mount your Model G0869 Benchtop
Table Saw onto a stable, yet portable work sur-
face. To mount Model G0869 to this stand, follow
the instructions below.
Note: This Roller Stand is designed only for use
with the Model G0869 Benchtop Table Saw or as
a replacement for the stand that comes with Model
G0870 Portable Table Saw. Do not attempt to use
Model G0871 as a stand for any other machine.
V1.02.19
Description Qty
A. Roller Stand (Not Shown) ........................... 1
B. Left & Right Handles (Not Shown) .......1 Ea.
C. Carriage Bolts M8-1.25 x 40 ....................... 4
D. Button Head Cap Screws M8-1.25 x 16 ..... 2
E. Hex Wrench 5mm ....................................... 1
F. Flat Wrench 10mm/13mm .......................... 1
G. Wheels ....................................................... 2
H. Lock Nuts M8-1.25 ................................... 10
I. Button Head Cap Screws M8-1.25 x 40 ..... 4
J. Flat Washers 8mm ..................................... 6
Inventory (Figure 1)
Assembly
1. Attach each wheel to axle with (1) 8mm
flat washer and (1) M8-1.25 lock nut (see
Figure 2).
2. Attach left handle to stand body with (2)
M8-1.25 x 16 button head cap screws (see
Figure 2).
3. Attach right handle to stand body with (4)
M8-1.25 x 40 button head cap screws and
(4) M8-1.25 lock nuts (see Figure 2).
Figure 1. Model G0871 inventory.
C
I J
H
D
G
F
E
Figure 2. Model G0871 assembly.
x 4
x 2
Left Handle Right Handle

1. Push leg lock buttons in and unfold legs until
lock buttons click into place in holes shown in
Figure 3.
Mounting Table Saw to Stand
Figure 3. Location of stand legs, leg lock
buttons, and leg lock holes.
Leg Lock Button
(1 of 4)
Hole
(1 of 4)
Leg (1 of 4)
2. Place table saw unit on stand. Secure with
(4) M8-1.25 x 40 carriage bolts, (4) 8mm
flat washers, and (4) M8-1.25 lock nuts (see
Figure 4).
Note: Table saw mounts to stand facing
either direction—with stand wheels oriented
to the left or to the right.
Figure 4. Model G0869 mounted on Model
G0871 Roller Stand.
x 4

G0871 Stand for G0869/G0870 (Mfd. 01/19) -3-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
53
5
7
24
8
10
9
8
10
5
5
24
5
5
21
411
5
5
10
12
5
5
10
12
6
6
14
17
13
10
18
27
28
15
16
22
6
10
18
16
15
6
22
13
10
18
17
14
15
16
16
15 13
66
6
6
6
9
22
6
14
17
21
21
21
22
22
6
14 17
6
4
21
13
10
18
22
6
19
20
19
622
23
23 6
6
66
25
26
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call [phone] or
go to www.grizzly.com.
WARNING!
G0871 Parts
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call [phone] or visit our online parts store at www.grizzly.com to check for availability.
REF PART # DESCRIPTION REF PART # DESCRIPTION
3 P0871003 STAND BODY 16 P0871016 E-CLIP 7MM
4 P0871004 STAND LEG BRACKET 17 P0871017 COMPRESSION SPRING 0.8 X 9.3 X 18
5 P0871005 BUTTON HD CAP SCR M8-1.25 X 40 18 P0871018 RUBBER FOOT M8-1.25 X 20
6 P0871006 LOCK NUT M8-1.25 19 P0871019 CAP SCREW M8-1.25 X 60
7 P0871007 HANDLE (LEFT) 20 P0871020 WHEEL AXLE
8 P0871008 BUMPER 21 P0871021 CARRIAGE BOLT M8-1.25 X 40
9 P0871009 CAP SCREW M8-1.25 X 45 22 P0871022 FLAT WASHER 8MM
10 P0871010 HEX NUT M8-1.25 23 P0871023 WHEEL
11 P0871011 HANDLE (RIGHT) 24 P0871024 BUTTON HD CAP SCR M8-1.25 X 16
12 P0871012 HANDLE FOOT M8-1.25 X 22 25 P0871025 FLAT WRENCH 10 X 13MM
13 P0871013 STAND LEG 26 P0871026 HEX WRENCH 5MM
14 P0871014 CLEVIS PIN, BUTTON HEAD-GROOVED 27 P0871027 GRIZZLY.COM LABEL
15 P0871015 FLAT WASHER 7MM 28 P0871028 READ MANUAL LABEL

-4- G0871 Stand for G0869/G0870 (Mfd. 01/19)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.