Groz IDR-2 User manual

INSTRUCTION MANUAL
S2545, REV A
4V Insta Drive Screwdriver
with Retractable Bit Cartridge
Patented retractable,
rotating bit cartridge
design makes it easy to
find, store and change
bits
Standard 1" (25 mm)
long x 1/4" (6.35mm) S2
Steel magnetized Bits
Smooth cartridge that
never jams
Large, easy to view
cartridge window
Easy to identify and use
forward / reverse switch
LED work light provides
visibility when working
in low light or enclosed
areas
Rechargeable Magnetic
charging cable enables
charging using common
USB chargers
4V Lithium-ion Power
Ideal for around
the house jobs for
professionals and DIY
users
Lithium Ion Battery
Retains charge up to 18
months
IDR-2
SPECIFICATIONS
CAT
NR.
ORD
NR. BATTERY CHARGING SYSTEM
CHARGING
TIME WEIGHT
IDR/2 33781 4V, 1.3 Ah
Lithium-ion
Cable with
computer
or cell
phone USB
connector
90 min – 5
hours
depending
upon USB
output
1 lb.
(0.46 kg)
BATTERY Integral 4V Lithium-ion, 1.3 Ah
RPM 200
MOTOR 380 W
TORQUE 3.95-4.5 Nm (35-40 in-lbs)
SWITCH Rocker Type
NUMBER OF BITS
STORED
7 magnetised bits
STORAGE Rear Cartridge
CHUCK SIZE 1/4" Hex
SPINDLE LOCK Yes
LED WORKLIGHT Yes
WEIGHT 0.467kg (1lb)
CHARGER Magnetic Charge Cable
INCLUDES USB Cable, Magnetised bits
BIT COMPATIBILITY 1" (25 mm) Hex Shank Driver Bits
Charge time of only
90 minutes using
USB 1A wall charger
Red light show
charging on & Green
light shows charging
complete
Led Light Easy to view
cartridge window
Forward
Switch
Chuck Cartridge
Window
Reverse
Switch
Retractable
Rotating
Cartridge

2
POWER TOOL SAFETY
Before using this tool or any of its accessories, read
this manual and follow all Safety Rules and Operating
Instructions. The important precautions, safeguards
and instructions appearing in this manual are not
meant to cover all possible situations
EYE, EAR & LUNG PROTECTION
Always wear eye protection that
conforms with CSA requirements or ANSI
safety standard z87.1
Flying debris can cause permanent
eye damage. Prescription eyeglasses
are not a replacement for proper eye
protection
WARNING
Non-compliant eyewear can cause serious injury if
broken during the operation of a power tool
Wear a dust mask that is designed to be
used when operating a power tool in a
dusty environment
WARNING
• Dust that is created by power sanding, sawing,
grinding, drilling, and other construction
activities may contain chemicals that are
known to cause cancer, birth defects, or other
genetic abnormalities. These chemicals include
• Lead from lead-based paints crystalline silica
from bricks, cement, and other masonry
products arsenic and chromium from
chemically treated lumber
• The level of risk from exposure to these
chemicals varies, according to how often
this type of work is performed. In order to
reduce exposure to these chemicals, work
in a well-ventilated area, and use approved
safety equipment, such as a dust mask that is
specifically designed to filter out microscopic
particles
• Read all safety warnings and instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create spark which may ignite the dust or
fumes
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way
• Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury
• Use personal protective equipment. Always
wear eye protection
• Prevent unintentional starting. Ensure the
switch is in the o-position before installing
the battery pack, picking up or carrying the
tool. Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack
• Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire
• When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or fire
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may
cause irritation or burns
SERVICE
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained
SPECIFIC SAFETY RULES
• This tool is NOT a toy. Do not allow young
children to operate the tool, as misuse can
result in serious injury
• Use clamps or another practical way to
secure and support the work-piece to a stable
WEAR SAFETY
GLASSES
WEAR SAFETY
GLASSES
WEAR
DUST MASK
WEAR
DUST MASK

3
NOTES
You do not have to be concerned about
polarity, just make sure the plug is held in place
magnetically
Fig. 2
Plug the charging cable
into any USB port such
as computer, cell phone
charger, cube or even car.
The LED light on the base
of the screwdriver handle will glow RED when
the battery is being charged. The LED will glow
GREEN when the battery is fully charged
NOTES
1. If the LED does not glow when the USB plug is
inserted into the USB port, it means that USB
port is not "live"
2. The time to fully charge a depleted battery will
vary depending upon the output of the USB
device being used to charge the battery. This
can vary from 45 min to 5 hours or more
ASSEMBLY AND OPERATION
Removing a bit from the bit
storage cartridge
Rotate the cartridge knob (1)
until the desired bit is visible
in the cartridge window (2)
Fig. 3.
Pull outward on the cartridge
knob until the bits are fully
exposed (Fig. 4)
Remove the desired bit and
return the cartridge to its
original position within the
screwdriver
INSTALLING A SCREWDRIVER BIT
WARNING
Never hold the screwdriver with your fingers near
the switch while changing the screwdriver bits.
Accidentally touching the switch may start the
tool and possibly cause an injury.
Insert the screwdriver bit (1)
into the chuck (2) until the bit
is securely held in the chuck by
the magnetized chuck (Fig. 5)
FORWARD/REVERSE SWITCH
To drive screws, press the
upper portion of the trigger
switch (1) (Fig. 6)
To remove screws, press the
lower portion of the trigger
switch (2)
platform. Holding the work by hand or against
your body is unstable and may lead to loss of
control
• Always wear safety goggles or eye protection
when using this tool
• Always check to make sure the area where
screws are being driven or where holes are
being drilled does not have any hidden wiring.
Contact with a "live" wire will make exposed
metal parts of the tool “live” and could result in
an electric shock to the operator
• Do not drive screws or break into existing walls
or other blind areas where electrical wiring
may exist. If this situation is unavoidable,
remove all fuses or disconnect all breakers
feeding the work area
• Never hold the body of the screwdriver near
the switch while changing bits. Accidentally
touching the switch may start the tool and
possibly cause an injury
• Always use the correct shape of screwdriver
bit that matches the head of the screw
• Always use the largest size screwdriver bit that
will properly fit into the head of the screw
• Do not use worn or damaged screwdriver bits.
Worn or damaged screwdriver bits will not
drive the screw properly and may jump out of
the screw head, causing possible injury and
damage to the work-piece
BATTERY & CHARGER SAFETY 
WARNING
• If the lithium-ion battery no longer charges
properly or is damaged, the battery must
not be discarded as household trash, burnt
or thrown into water. The battery must be
disposed of as hazardous waste in accordance
with all municipal requirements
• Do not incinerate a discarded battery. It can
explode in a fire
• Charge the battery only with the 4V USB
charging cable supplied for this 4V Li-ion
screwdriver
• For best results, charge the battery when the
temperature of the battery and the work area
is at or above 0° C (32° F) and below 45° C
(113° F)
CHARGING THE BATTERY
WARNING
Use only the specified 4V Li-ion charging cable
supplied with your tool. Using any other charging
system may damage the battery and possibly
cause serious injury
Fig. 1
To charge the battery, plug the
magnetic end of the charging
cable into the matching
receptacle on the base of the
screwdriver handle
Fig. 4
Fig. 2
Fig. 1
1
2
Fig. 3
Fig. 5
12
1
2
Fig. 6

4
LED WORKLIGHT
The LED worklight (1) will
automatically turn ON when
the trigger switch is activated
(Fig. 7). It will automatically
turn OFF when the trigger
switch is released
WARNING
• For safety reasons, the operator must read
all sections of this Owner’s Manual carefully,
before using this screwdriver
• Every time you use the screwdriver you should
verify the following:
a. Screwdriver bit is the correct type & size,
not worn and not damaged in any way
b. Work piece is properly secured
c. Safety glasses are being worn
Failure to adhere to these safety rules can greatly
increase the chances of injury
GENERAL MAINTENANCE
DO NOT use solvents when cleaning plastic
parts. Plastics are susceptible to damage from
various types of commercial solvents and may
be damaged by their use. Use a clean cloth to
remove dirt, dust, oil, grease etc.
WARNING
• DO NOT allow brake fluids, gasoline,
petroleum-based products, penetrating oils,
etc. to come into contact with plastic parts.
They contain chemicals that can damage,
weaken or destroy plastic
• When cleaning the tool with compressed air,
always wear safety goggles. Flying debris can
cause serious eye damage
• DO NOT attempt to modify tools or
create accessories. Any such alteration or
modification is misuse and could result in
a hazardous condition leading to possible
serious injury. It will also void the warranty
LITHIUM-ION BATTERY MAINTENANCE
Lithium-ion batteries do not have a “memory”
and do not require to be completely discharged
periodically. It is recommended that you charge
your Lithium-ion batteries after each use so they
will be fully charged when needed

NOTE
A fully charged battery will lose about 2% of its
charge per month during storage
BATTERY PACK REMOVAL & PREPARATION
FOR RECYCLING
• To preserve our natural resources, please
recycle or dispose of batteries properly
• The batteries supplied with this tool may
contain chemicals and metals that are
harmful to the environment. Never dispose
of rechargeable batteries in your normal
household garbage or in landfill sites
because they will add to the pollution of the
environment
• Consult your local waste authority for
information regarding available recycling and
disposal options
WARNING
• Upon removal of the battery pack, cover the
terminals of the battery pack with electrical
tape or heavy-duty adhesive tape. Never touch
both terminals with metal objects or body
parts, because a short circuit may result. Keep
away from children. Do not attempt to destroy
or disassemble battery pack or remove any of
its components. Rechargeable batteries must
be recycled or disposed of properly. Failure to
comply with these warnings could result in fire
and serious injury
• Chemicals known to the State of CA to cause
cancer are present in this product. Chemicals
known to the State of CA to cause birth
defects or reproductive harm are present in
this product.
1
Fig. 7

5

6

7

Groz Engineering Tools (P) Ltd.
Groz Net Industries
Village Kherki Daula, National Highway-8,
Gurugram-122001, Haryana, INDIA
Tel [phone]
Fax [phone]
E-Mail [e-mail]
Url www.groz-tools.com
The GROZ name, GROZ logo and the mark are
trademarks of GROZ Engineering Tools (P) Ltd., India
GROZ WARRANTY POLICY
GROZ makes all eorts to ensure that its products meet the highest standards of quality and durability and warrants to the original purchaser its
range of products for a period of 12 months from GROZ Invoice date, against defects in materials and workmanship. If the GROZ product is part of
a set, only the portion that is defective is subject to this warranty.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, wear and tear, negligence or accident, repairs or alterations
outside GROZ plants, or to lack of maintenance. GROZ shall in no event be liable for death, injuries to persons or property or for incidental,
contingent, special or consequential damages arising from the use of its products. It is upto the user to determine suitability and safety of the
product for their intended use, and the user assumes all risks and liability herewith.
In no event, shall GROZ’s liability exceed the invoiced cost of the product In case of identification of defect covered under this warranty, the same
must be notified in writing to GROZ /GROZ designated authorized service location. Proof of purchase date must accompany the complaint. GROZ
reserves the right to call back the faulty unit, all charges including transportation prepaid. On verification of the defect, the unit will be repaired or
replaced with a new or reconditioned product or part of equal utility or a full refund given at GROZ’s discretion. The repaired /replaced units will be
returned to the user freight prepaid, using most economical freight carrier. However if determined that the defect resulted from causes not within
the scope of the warranty, then the cost of returning the product would be to buyer’s account.