Grundig ProDose 16 User manual

Operating the product
Quick Guide
1. On / Off Button
2. Program Selection Button
3. Low Salt Warning Indicator
4. Low Rinse Aid Warning Indicator
5. Program Running Indicator
6. Display
7. Function Selection Button
F1
F2
F3
F4
F5
F6
8. Start/Pause/Cancel Button
9.
10.
11.
12.
13.
Do not touch the machine display with
wet hands.
The buttons cannot be operated when
the door is open. Make sure the door is
closed for the buttons to operate.
Remote Control (HomeWhiz) function
HomeWhiz Indicator
Delay function
Read “Safety Instructions” section first!
Express Function
Automatic Liquid/Gel Detergent Dosage Function
Hygiene Care function
DeepClean function
Doormatic Indicator
Doormatic Function
Child (Key) Lock Indicator
Child (Key) Lock Function
12345678
9
10
11
13 12
P1 F1
P4 F4
P5 F5
P6 F6
P2 F2
P3 F3

123456
Auto Intensive Eco *** QuickWash Mini Downloaded Program
40 ºC-65 ºC 70 ºC 50 ºC 60 ºC 35 ºC -
It determines the soiling
degree of the dishes and
sets the temperature and
amount of the washing
water as well as the
washing time
automatically. It is suitable
for all dish types.
It is suitable for heavily
soiled pans and trays.
Suitable for washing
dishes with normal
amount of soil. It is the
most efficient program in
terms of combined power
and water consumption.
This is used for assessing
the compliance with EU's
eco-design directive.
It is the daily washing
programme to wash the
normally soiled left dishes
in the fastest way.
It is suitable for quickly
washing the lightly soiled
dishes that have
undergone precleaning
process.
Please check the
HomeWhiz app for
programmes you can
download through
wireless connection.
Medium to high High Medium Medium Low -
+++- - - +++++- ++++- -
112-195 194 230 77 60 9,4-12,4 16,8 9,5 10,6 10,8
0,90-1,45 1,51 0,84* / 0,861** 1,18 0,78
Loading Capacity: 15
Programme Data and Average Consumption Values Table
* : EN 60436:2016 ** : EN 60436:2020 The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. *** Reference programme for testing institutes. The tests in accordance with EN 50242/60436 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme. The values given for programmes other than Eco 50°C programme are indicative only. Programme number Programme name Cleaning temperature Degree of Soiling Energy (kWh) Prewash Wash Dry Duration (min) Water (I)
Quick Guide

Adjusting the water softening system
•Unpack the test strip.
•Open the tap and let the water flow for approx. 1
minute.
•Dip in the test strip into the water for 1 second.
•Take out the strip from the water and shake it.
•Wait for 1 minute.
•Make the necessary adjustment according to the test
strip.
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
Washing, rinsing and drying performance of your dishwasher will improve when the water
softening system is adjusted correctly.
To adjust the system, first learn the water hardness in your region and adjust as indicated
below.
Quick Guide
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French* Water
Hardness °dF Water Hardness Level Indicator
Level 0 0-5 0-4 0-8 Press the Selection key to switch the water hardness level
to position 1. (r1)
Level 1 6-9 5-7 9-13
Level 2 10-15 8-12 14-22 Press the Selection key to switch the water hardness level
to position 2. (r2)
Level 3 16-19 13-15 23-27 Press the Selection key to switch the water hardness level
to position 3. (r3)
Level 4 20-24 16-19 28-34 Press the Selection key to switch the water hardness level
to position 4. (r4)
Level 5 25-62 20-50 35-90 Press the Selection key to switch the water hardness level
to position 5. (r5)
After the determination of the water hardness:
1. When the door is closed, after turning on your machine with the On/Off button, enter the
Sub-Menu by pressing the On-Off and P2 program buttons simultaneously for 3 seconds.
2. Move to "r" position on the display by pressing the P2 button.
3. Set it to the appropriate level by selecting one of the “r: 1”, “r: 2”, “r: 3”, “r: 4” or “r: 5”
positions with the P3 program button.
4. Exit the settings menu by pressing the On/Off button for 3 seconds. Your settings will be
saved automatically.

Adjusting the water softening system
Quick Guide
1588660100-AA_GRUNDIG_B8L_EN/13-01-21.(11:36)
•If the hardness level of the water that you use is above 50°dH or if you are using well
water, than it is recommended to use filter and water purification devices.
•Since your machine has an Automatic Water Hardness Detection System, you need to
add salt suitable for the dishwasher when the Salt Indicator light turns on.If you do not
add salt, the Automatic Water Hardness Detection System will not function correctly.
Even though your machine is equipped with Automatic Water Hardness Detection
System, water hardness setting is done by the authorised service agent/user
during the first setup. When moving, your dishwasher will set the water hardness
automatically, depending on the water hardness level of the place you have moved to.