GTX 6 User manual

GTX is a new generation high quality 1/8 scale nitro onroad car.
GTX is supplied in a box equipped with Instruction Manual.
Its use is intended for more than 16 years old persons with experience on rc model car field.
Children and all the persons without this requirement MUST have direct supervision of a
knowledgeable adult responsible.
Please don't hesitate to contact WRC support at [email protected] for any problem or
question.
Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option
parts and other information.
W.R.C. world racing car s.r.l.
Via Meucci, 23/B
36040 Brendola (VI)
ITALY
Phone: [phone]
fax: [phone]
E-mail: [email protected]
Website: www.wrc-racing.com
CUSTOMER SUPPORT
WRC guarantees this model kit to be free from defects in both material and workmanship within 30
days of purchase.
The total monetary value under warranty will in no case exceed the cost of the original kit
purchased.
This warranty doesn't cover any compnents damaged by use or modification or as result of wear.
Part or parts missing from this kit must be reported within 30 days of purchase.
No part or parts will be sent under warranty without proof of purchase.
If you find a defective or missing part, contact the local distributor.
Customer service and support will be provided through local hobby store.
No warranties are expressed or implied that cover damage caused by what is considered normal
use or cover or imply how long any model cars' components or electric components will last before
requiring replacement.
Due to the high performance level of this model car you will need to periodically maintain and
replace consumable components; any and all warranty coverage will not cover replacement of any
part or component damaged by neglect, abuse or improper or unreasonable use.
This includes but is not limited to damage from crashing, excessive moistur, improper use or no
maintenance or user modifications which compromise the integrity of components.
Warranty will not cover compnents that are considered consumable on RC model car.
WRC doesn't pay nor refund on any component sent from WRC or its distributor for warranty.
WRC reserves the right to make final determination of the warranty status of any component or part
Use only original WRC spare part:
WARRANTY
Assemble the kit only away from the reach of children.
Follow the building and operating instructions using the utmost care.
Don't put any part of your body inside rotating and moving elements as this may cause damage or
serious injury.
Check and clean the model before putting it away.
Don't use your model car in public places or in roads and areas where it could generate conflict with
person or vehicular traffic.
The model car is controlled by radio: you MUST put great care to avoid loss of radio control always
keeping a safety margin all around your model in order to prevent any collision.
Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could
cause loss of control of the RC model.
Always turn on your transmitter before you turn on the receiver in the car and always turn off the
receiver before you turn off your transmitter.
Keep the wheels of the model off the ground when checking the operation of the radio equipment.
Disconnect the battery pack before storing your model.
GENERAL INFORMATION
Instruction Manual MUST be read and fully understood before to start building and operating
functions.
Always keep Instruction Manual in safety place, ready to be consulted for any reference you need.
Use only original WRC spare parts.
SAFETY PRECAUTIONS
INTRODUCTION

RING PLIERS
ALLEN:
1.5 MM.
2.0 MM.
2.5 MM.
3.0 MM.
SIDE CUTTER
SCISSORS
POCKET BOOSTER STARTER
TECHNICAL INFORMATION
- BODY: PROTOTIPE MODEL (NOT INCLUDED)
- ADJUSTABLE FRONT TOE, CAMBER AND CASTER
- ADJUSTABLE REAR TOE AND CAMBER
- BUMPER /FRONT BACKSTOP
- ALUMINIUM CHASSIS
- FULL BALL BEARING
- CARBON RADIO PLATE
- TRANSMISSION: TRIPLE BELT 4WD
- FRONT DIFFERENTIAL: ONE-WAY
- REAR DIFFERENTIAL: SOLID AXLE
- FRONT AND REAR ADJUSTABLE ANTI-ROLL BARS
- PIVOT BALL SUSPENSIONS
TECHNICAL DATA
- LENGHT .............................................435 MM.
- WIDTH .............................................260 MM.
- WHEEL BASE ............adjustable 294-298 MM.
- WEIGHT CHASSIS.............................2080 GR.
REQUIRED BUT NOT INCLUDED IN THE KIT
ADDITIONAL ITEMS NEEDED FOR COMPLETION
ENGINE AND MUFFLER
TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
2 LOW PROFILE STEERING SERVO
TRANSMITTER
THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE GTX; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND
SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP.
BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
NOTICE:
RECEIVER
AA ALKALINE BATTERIES
FOR TRANSMITTER
AND RECEIVER
WHEEL - TYRES - INSERTS
LEXAN BODY
FUEL AND FUEL PUMP
2

BAG 1
93001
M3 x6
03100
03114
03159
03239
90019
5-8-2.5 flanged
03124
03186
97004
Ø2x8
03185
93001
M3 x6
MAGNET
MUST ATTRACT
BRAKE CALIPER
93001
M3 x6
93001
M3 x6
GLUE
GREASE
BAG 2
03127
90012
12-18-4
03238
03123
03231-1
97009
Ø3x22
03121
03122
3

92020
M4 x8
92002
M3 x8
03095
03115
03098
PLEASE
NOTE ORIENTATION
PLEASE
NOTE ORIENTATION
ADJUSTING BELT
TENSION (SET 0 POSITION)
0
+
-
FRONT REAR
4
BAG 3

03119
03237
Ø3x58
92001
M3 x6
91002
M3 X8
03095
AA
SCALA 1 : 1
5
2.5
LUBRICATE
THREADLOCKER
98008
M4x10
03096-4
03086-1
03137-2
03137-3
03136
03137-3
03137-2
03116
93010
M2.5 x 5
BAG 3
5
x2

03117
CAMBER SET
03117
96000
M3 x14
94001
M3
03117
00100
00141
00141 00100
03154
03151-1
03151-2
97000
Ø2.5x11.8
03153
90012
12-18-4
90012
12-18-4
x2
BAG 4
6
BAG 5
x2

98000
M3x3
03069-1
98000
M3 x3
03215
90007
5-8-2.5
03222-3.2
Ø 3.2
BAG 5
93002
M3 x8
03120-1
93002
M3 x8
93003
M3 x10
93003
M3 x10
93002
M3 x8
100416
100120
UN0001
03105-1
OPTIONAL
COD
ANTI ROLL BAR
03222-3.0
Ø 3
03222-3.2 Ø 3.2
STANDARD
7

TOE IN
PLEASE NOTE
SET
REAR CAMBER
3
4
9
8

03166 92002
M3 x8
03132
90010
8-14-4
03123
20 T
97007
Ø3x14
99001
CLUTCH ADJUST
99001
03123
18T
97007
Ø3x14
03123-7
03175
03176
03241
M3 x14
M3X6
32
A
A
SCALA 1 : 1
15.5
BAG 6
9

97000
Ø2.5x11.8
03176-1
99001
03171-61
61 T
03172
92010
M2.5 x 5
03174
92010
M2.5 x 5
90004
8-12-3.5
03173-57
57 T
90004
8-12-3.5
OPTIONAL
62T 03171-62
OPTIONAL
COD (1ST)
03171-60 60T
03171-61 61T
STANDARD
SPEED GEAR
OPTIONAL
58T
STANDARD
03173-57
03173-56
COD (2ND)
OPTIONAL
03173-58
56T
57T
BAG 6
10

03232-1
03167
03123
23 T
99002
Ø14
90011
12-8-4
03192
03232 OPTIONAL
SUPER SOFT BELT
03086-1
92001
M3 x6
03134
03096
93010
M2.5 x 5
03116
03136
03137-2
03137-2
03137-3
03137-3
x2
AA
5
LUBRICATE
THREADLOCKER
BAG 7
11

92020
M4 x8
03106
92002
M3 x8
03107
92002
M3 x8
03106
03245
3 x 74
03096
3x8x2
98000
M3 x3
98008
M4x10
FIXING WITH LIGHT
THREAD LOCKER GLUE
5,2
BAG 7
12

98000
M3 x3
03069-1
98000
M3 x3
03215
90007
5-8-2.5
03221-2.3
Ø 2.3
03095
03096
03096
03096
03096
03095
93009
M2 x5
97010
Ø3x50
03108-1
93001
M3 x6 03112
92001
M3 x6
PLEASE NOTE
ORIENTATION
93009
M2 x5
STANDARD
Ø 2.3 03221-2.3
Ø2.2 03221-2.2
ANTI ROLL BAR
COD
OPTIONAL
03221-2.4 Ø 2.4
OPTIONAL
13
BAG 8

03154
03153
97000
2.5X11.8
03152-1
03110
03110
1mm 00100
00141
03069
03101 93002
M3 x8
03110
90012
12-18-4
03219
03247
3x7x2.5
93004
M3 x12
14
x2
x2
BAG 9

6
7
15

90007
5-8-2.5
03142
03144
21-23
03144
93002
M3 x8
03148
03143
03141
03144
03069
03069
93001
M3 x6
03123
29 T
99001
03165
03111
90006
10-15-4
03123
18T
99001
PLEASE NOTE
ORIENTATION
16
BAG 10

00132 00124
44
93002
M3 x8
93002
M3 x8
2 REAR
00124-1
OPTIONAL TITANIUM
BAG 10
17

03069
SERVO
NOT INCLUDED
03366
servo spacer
93001
M3 x6
93001
M3 x6
03055-2
93001
M3 x6
03055
93001
M3 x6
03366
03366
03055
93001
M3 x6
03055
03055
93002
M3 x8
03055
00132
00125
00132
03086-1
03086-1
98005
M3X8
03069
600402
93002
M3 x8
LEADS SUPPORT
93004
M3 x12
90007
5x8x2.5
03368
03367
90007
5x8x2.5
93009
M2 x 5
03189-2
03044
03125-5
3
18
BAG 11

03104
92020
M4x8
03243
03223
98012
M4x4
93001
M3 x6
93001
M3 x6
MORE STIFF VERSION
USE N°4 SCREWS
STANDARD SET UP
N°2 SCREWS
FLOATING PLATE
FOR
FLOATING PLATE
DO NOT FIX
THESE SCREWS
93002
M3 x8
03226
93001
M3 x6
100416
98001M3 X6
BAG 12
19