Guardian GPC-R2 User manual
Aventura Technologies, Inc. 48 Mall Drive, Commack, NY 11725 U.S.A. P:631.300.4000 / F:631.434.7000 / aventuracctv.com Rev.100815
GPC-R2 User Manual
Guardian TM
Body Camera
Aventura Technologies, Inc. 48 Mall Drive, Commack, NY 11725 U.S.A. P:631.300.4000 / F:631.434.7000 / aventuracctv.com Rev.100815
Front
1. IR light
2. Brightness sensor
3. Charge indicator
4. Laser light
5. Recorder Mic
6. Multi-functional key
7. Playback
8. ON/OFF
9. Status indicator
10. Lighting
11. Intercom Mic
12. Audio REC
13. Menu key
14. Data interface
Back
15. Cord hole
16. Video REC
17. USB port
18. HDMI port
19. External camera port
20. Snapshot
21. Intercom
22. Reset
Structural Diagram
Aventura Technologies, Inc. 48 Mall Drive, Commack, NY 11725 U.S.A. P:631.300.4000 / F:631.434.7000 / aventuracctv.com Rev.100815
1. Turning On the Camera
2. Turning O the Camera
3. Snapshot
4. One Touch Shoot
In powered o, long press for 3 seconds. After a beep, the camera will turn on and automatically
go to preview mode. Meanwhile, the status indicator will turn green. In preview mode, the following
screen will appear:
In preview mode, long press for 3 seconds, after two beeps, the camera will save current status
and turn o. Meanwhile, the status indicator will go o.
In preview mode, press to take a photo; long press to take more than one photo
continuously. The quantity of photos can be set in menu. There is a crack sound every time a photo is
taken, and the photo will be automatically saved in JPG format.
In powered o status, long press , after a beep, the camera will turn on and a photo is taken
when you hear a crack sound, the status indicator turns red and ashes, the photo will be automatically
saved in JPG format.
1. Remain recording time
2. Status (Dierent icon means dierent working
status. Red point means video recording.)
3. Device ID and ocer ID number
4. Inside SD card is detected.
5. Battery status
6. Date/time
7. Remain space
8. Zoom times
9. GPS status info
Basic Operations
Aventura Technologies, Inc. 48 Mall Drive, Commack, NY 11725 U.S.A. P:631.300.4000 / F:631.434.7000 / aventuracctv.com Rev.100815
5. Recording a Video
6. One Touch Video Recording
7. Audio Recording
8. One Touch Audio Recording
9. IR Mode
10. Supplementary Lighting
In preview mode, press , after a beep, the camera will start recording. Meanwhile, the status
indicator will turn red and ashes. Press again, after two beeps, the camera will stop recording,
and the video will be automatically saved in MP4 format.
In powered o status, long press , after a beep, the camera will turn on and start recording. Mean-
while, the status indicator will turn red and ashes. Press again, after two beeps, this camera will
stop recording, and the video will be automatically saved in MP4 format.
In preview mode, press , after a beep, this camera will start recording sound. Meanwhile, the
status indicator will turn yellow and ashes. Press again, after two beeps, this camera will stop
recording, and the audio will be automatically saved in WAV format.
In powered o status, long press , after a beep, the camera will turn on and start recording. Mean-
while, the status indicator will turn yellow and ashes. Press again, after two beeps, this camera
will stop recording, and the audio will be automatically saved in WAV format.
Manual mode: in preview mode or while recording a video, long press to switch to IR mode.
Long press again to exit from IR mode.
Auto mode: in preview mode or while recording a video, when the ambient brightness is low, it will
automatically turn on IR function; and when the brightness is high, it will automatically turn o.
In power on status, press to turn on supplementary lighting, further press to turn it o
11. Laser Light
Manual mode: in preview mode or while recording a video, long press to turn on the laser light,
further long press to turn it o. Auto mode: enter video recording status; it will automatically
turn on laser light to position.
Aventura Technologies, Inc. 48 Mall Drive, Commack, NY 11725 U.S.A. P:631.300.4000 / F:631.434.7000 / aventuracctv.com Rev.100815
12. Playback
13. Voice Broadcast
14. Time Announcement
15. Turning O the Screen
16. Menu
In the preview mode, press to enter into the playback interface. The move left icon is
and the move right is , press to conrm your selection, press to exit, as the gure
shown: Left-> video Right-> photo OK-> playback Exit-> menu
When this function is turned on, the device will announce when starts/ends video/audio recording, as
well as alert the battery level and memory status.
When this function is turned on, it will announce the time at the top of each hour.
In preview mode or during video recording, press to turn o LCD screen, meanwhile, the
camera will go to sleep mode. Press any button to wake LCD screen so that this camera will exit from
sleep mode.
In preview mode, press to turn o screen display to enter sleep mode, press /
to select corresponding icon, press to conrm and enter this function, press / to
move the cursor and select, then press to conrm and nish the setting. The functional menus
are described as follow:
1. Video resolution
2. Photo Pixel;
3. Continuous shooting
4. Video quality; 5. Pre-recording
6. Post-recording
7. Video loop
8. Video clip
9. IR auto switch
10. Motion detection
11. GPS
12. Screen o
13. Auto turn-o
14. Laser light switch
15. Beep sound
16. Vibration
17. Indicator
18. Audio Alert
19. Mic
20. Volume.
Aventura Technologies, Inc. 48 Mall Drive, Commack, NY 11725 U.S.A. P:631.300.4000 / F:631.434.7000 / aventuracctv.com Rev.100815
17. Reset
18. HD Output
19. Extend Functions
20. Charging the Battery
In case of system crash while this camera is powered on, press this button to reset and shut down this
camera manually.
Note: This operation will not cause loss or damage of any data.
Connect HDMI display device to this camera via HDMI interface to view HD photo/video stored in this
camera.
This camera can be connected to other devices, such as 3G/4G modular, DV, etc.
Note: Please select external equipment certied by Aventura Technologies, Inc to ensure compatibility
with this device.
This camera has a chargeable battery built in. In case of low battery, please connect the camera to
power supply for battery charging.
Connect this camera and adaptor via USB cable, and connect adaptor to power supply to charge the
battery. In charging status, the status indicator will turn red. Once fully charged, the status indicator will
turn green.
Note: When recharging the body camera, please make sure it is OFF. Recharge the unit every 3 months,
if the camera is not being used for an extended period of time.
Table of contents
