Guide TU Series User manual
1
GB CN DE FR RU
Thank you for choosing our product. Please thoroughly go through user
manual before operation and keep it well for future reference. All photos
here are for reference only. and specifications are subject to the physical
product.
V1.0 202106
Quickstart Guide
TU Series Thermal Imaging Cameras
- CONTENT -
GB TU Series Thermal Imaging Cameras
Quickstart Guide.................................................. 1-19
CN TU系列热成像仪快速操作指南.............................. 21-35
DE TU-Serie Wärmebildkameras
Kurzbedienungsanleitung ................................. 37-59
FR Manuel d'utilisation rapide de
la caméra thermique série TU............................ 61-83
RU Тепловизоры серии TU
Инструкция по быстрой эксплуатации ......... 85-107
1
GB CN DE FR RU
- IMPORTANT -
Thank you for purchasing this product. Please read this
Guide first and keep it properly for future reference. We hope
this product will meet your expectations.
This Guide is a general guide for a series of products, which
means that the product you receive may dier from the
description in the Guide. The actual product you receive
shall prevail.
This Guide is prepared to introduce our products to the users.
We will try our best to ensure the accuracy of the Guide, but
the completeness of the Guide still cannot be guaranteed,
because our products have been continuously upgraded. We
reserve the right to modify at any time without prior notice.
- FCC WARNING -
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
2
GB CN DE FR RU
- IMPORTANT -
DANGER
1) Please follow the method described in this
Guide for charging the cell, and follow the
charging procedures and precautions. Improper
charging may cause overheating, damage and
even personal injury. Do not attempt to open
or disassemble the cell at any time. If any liquid
touches the eyes in case of cell leakage.
2) Please rinse with clean water immediately and
seek medical care.
WARNING
1) Please keep the device as stable as possible to
avoid violent shaking.
2) Do not use or store the device in an environment
with the temperature higher than the permitted
level.
3) Do not expose the device directly to high-intensity
heat radiation source, such as the sun, laser, spot
welding machine, etc..
4) Do not block the holes on the device.
5) Do not knock, throw or vibrate the device and
accessories to avoid damage.
3
GB CN DE FR RU
6) Do not disassemble the unit by yourself, which
may cause damage to the device and loss of
warranty rights.
7) Do not use soluble or similar liquid on the device
and cables, which may cause damage to the
device.
8) Please do not use the device in an environment
with the temperature higher than the permitted
level, which may cause damage to the device.
9) Please observe the following rules when wiping
this device:
Non-optical surface: if necessary, use a clean
and soft cloth to wipe the non-optical surface of
the thermal imaging camera.
Optical surface: avoid soiling the optical surface
of the lens when using the thermal imaging
camera, and especially avoid touching the lens
with your hand, because the optical coating on
the glass surface may be corroded due to sweat
on the hands. When the optical lens surface is
contaminated, use a professional lens cloth to
carefully clean it.
10) Do not put the cell in a high temperature
environment or near high-temperature objects.
4
GB CN DE FR RU
11) Do not short-circuit the positive and negative
terminals of the cell.
12) Do not place the cell in a humid environment or
the water.
NOTES
1) Do not expose the device to dust or moisture.
When used in an environment with water, avoid
splashing water on the device. The lens shall be
covered when the device is not in use.
2) When this device is not used, please place the
device and all accessories in the special packing
box.
5
GB CN DE FR RU
- LIST OF PARTS -
Options：
REMOTE CONTROL
PLUG
CHARGER
PICATINNY SUPPORT
MICRO HDMI CABLE
POWER ADAPTER
CELL
BAG TYPE-C CABLE
6
GB CN DE FR RU
- PRODUCT COMPONENTS -
This Guide is applicable to many models of this series, and
only one model is shown in the figure.
DIOPTER
ADJUSTMENT
KNOB
TYPE-C PORT
MICRO HDMI PORT
ZOOM-IN KNOB
MENU KNOB
SHUTTER BUTTON
POWER BUTTON
LENS COVER
FOCUS RING
LENS
CELL COVER
CELL
EYEPIECE
7
GB CN DE FR RU
1. FOCUS RING
After the thermal imaging camera is turned on, it shall
be aimed at the target. When the distance between the
observation target changes, the image may be blurred.
Therefore, it is necessary to turn the lens focus ring to
refocus until the target image is clear.
2. LENS COVER
Please cover the lens to protect the lens when the
product is not in use!
3. USB TYPE-C PORT
The external port with USB cable can be connected to
the external power supply to charge the product.
The output of the external power supply is 5V2A.
4. MICRO HDMI
Through the video cable of the external port, the external
power supply and the external screen can be connected
at the same time, and the image of the thermal imaging
camera can be output to the external monitor for display.
5. CELL COVER
When the cell of the product is used, it is the inlet for
disassembling and installing the cell.
NOTE: please insert the cell in the direction shown in
the figure, and do not push the cell forcibly.
8
GB CN DE FR RU
- QUICKSTART INSTRUCTIONS -
Button
Current
Device
Status
Rotation Press Long Press
Power
button
Power on / Compensation Display o/
o
Power o / / Power on
Display o / Display on /
Menu
knob
Menu bar
not shown
Switch
to color
palettes / /
Menu bar
display Toggle
options / /
Menu
button
Menu bar
not shown / Shortcut menu Menu
Menu bar
display / Select current
option
Return to
previous
option
Zoom-in
knob Menu bar
not shown
Zoom in
or zoom
out / /
/ Times zoom-in /
【BUTTON DESCRIPTION]
1. POWER BUTTON
POWER ON:
Long press and hold the power button until the startup
9
GB CN DE FR RU
picture appears in the eyepiece, then the infrared
gunsight can be switchedonsuccessfully.
POWER OFF:
a. Manual power-o: long press and hold the power
button, the power-o progress bar will be displayed,
and the power-o succeeds after the progress bar is
finished.
b. Automatic power-o: In the set automatic power-o
time, without any button operation, the automatic
power-o.
DISPLAY OFF:
Press and hold the power button, the progress bar of
power-o will be displayed. Before the progress bar is
finished, the power-o will be canceled and the Display
o mode will be entered.
DISPLAY ON:
In Display o mode, press any button to wake the screen.
COMPENSATION:
When it is turned on and the menu is out of the state,
short-press the power on/o button to complete the
corresponding compensation action (except automatic
compensation).
2. MENU KNOB
Quick color palette switching: when it is turned on and
10
GB CN DE FR RU
in the state where the menu is not brought out, turn the
menu knob counterclockwise to switch between white
hot, black hot, adjustable red hot, iron red, blue hot/
green hot pseudo color in turn.
Menu movement: When powered on and in the menu out
state, turn the menu knob clockwise to move menu or
option down/to the left; Turn the knob counterclockwise
to move menu or option up/To the right.
3. MENU BUTTON
SHORTCUT MENU:
When it is powered on and the menu is not recalled,
short-press the Menu button, and the shortcut menu
option will appear.
MAIN MENU:
Main menu option will appear if Menu button is pressed
for long time when it is powered on and menu is called
out state.
CONFIRM AND BACK/EXIT:
When it is powered on and in the menu recall state, short-
press the Menu button to confirm the current selection
and return to the previous menu; Press and hold the
menu button to return to or exit the menu without saving
the current settings.
11
GB CN DE FR RU
4. ZOOM-IN KNOB
ZOOM-IN:
When it is turned on and in the menu with the
approximate range not invoked, rotate the zoom knob
clockwise to enlarge the image in 0.1 steps, and stop
when the zoom in is the maximum value.
ZOOM-OUT:
When it is turned on and in the menu with the
approximate range not called, rotate the zoom knob
counterclockwise to reduce the image by 0.1, and stop
when it reaches the minimum value.
TIMES ZOOM-IN:
When it is turned on and in the menu, and the
approximate range measurement is not called, the times
zoom-in can be obtained by short-pressing the zoom
knob.
5. SHUTTER BUTTON
TAKE PHOTOS:
When it is turned on and in the state where the menu
is not recalled, short-press, take a photo and freeze the
frame for 300ms to restore the real-time image.
VIDEO RECORDING:
When it is turned on and in the state where the menu
is not called, long press and hold the photographing
12
GB CN DE FR RU
button to start recording, and then long press and hold
the recording again to finish recording.
During the video recording, short-press to take photos
and freeze for 300ms to restore the real-time picture.
【FUNCTION DESCRIPTION】
1. SHORTCUT MENU
· PIP: There are top left, top middle, and top right
positions to choose from.
· Screen BRI: Screen BRI level can be adjusted, 1-10
levels can be adjusted.
· Approximate ranging: the position of the lower
horizontal line remains unchanged, and the upper
horizontal line can be moved by the Rotary menu
knob to estimate the target distance
· Hot track: a white cross cursor is displayed when it is
turned on to trace the highest temperature point in
the full image
· Super energy-saving: After being turned on, ARM will
be switched to low-power mode, OLED brightness
will be fixed to 20% and cannot be adjusted, and WIFI
will not be turned on. If the current WIFI is already
on, WIFI will be turned o, and the shooting record
function cannot be turned on, if you are currently in
shooting recording mode, the prompt is turned o.
13
GB CN DE FR RU
Zeroing distance: the current zeroing distance can
be adjusted quickly.
2. MAIN MENU
· Image quality enhancement: image quality can be
adjusted by turning on.
· Scene mode: Three scene modes, natural/
enhanced/highlight, can be set.
· Color palette: can be adjusted in white hot/black
hot/adjustable red hot/iron red/blue hot/green hot.
Brightness: detector brightness can be adjusted with
1-10 levels.
NOTE: The adjusted brightness value will be saved
in the current scene mode.
· Contrast: Adjustable for 1-10 levels.
NOTE: The adjusted contrast value will be saved in
the current scene mode.
· Compensation mode: automatic compensation/
scene compensation/shutter compensation can be
set.
· Zeroing individual setting: 10 groups of zeroing
individual setting parameters can be saved. The
zeroing distance, zeroing location, scale mark type,
scale mark color and scale mark brightness need to
be saved.
14
GB CN DE FR RU
· Scale mark type: Ten types in total can be selected.
Scale mark color: can be selected in black/white/
yellow/green/blue/red.
· Scale mark brightness: the scale mark brightness
can be adjusted with 1-10 levels.
· WiFi:
The WiFi can be used to transmit real-time video
to the mobile phone after the mobile phone client
is connected to the device, and the device can be
operated through the APP to access the photos/
videos of the device, photos/videos can be played,
shared, deleted, etc.
NOTE: Search and download 'TargetIR' APP in the
mobile phone APP store, open the APP, find the
WiFi name 'SCOPE-TI-xxxx' in the settings of mobile
phone WiFi, and enter the password '12345678',
remote operation after successful connection.
· Recording mode: it can be selected in single
shooting/shooting record after being turned on.
· Watermark Settings: can be selected in Time Only/
Date Only/Time Date/O when turned on.
· Auto Stand-by: the Auto Stand-by time can be set to
5/10/15 min. If there is no operation within the set
time, the sleep state will be entered.
15
GB CN DE FR RU
· Automatic power-o: The automatic power-o
time can be set to 15/30/60 minutes. If there is no
button operation at the set time, the power-o will
be entered, and the power-o will be completed.
· Charging indicator lamp: Switch that controls the
charging port indicator lamp.
· Time format: selectable between 12H/24H.
· Date format: Optional from YYYY-MM-DD/MM-DD-
YYYY/DD-MM-YYYY.
· Time setting: enter the time adjustment port, rotate
the menu knob to move among the various options,
and press the Menu button to enter the next level
adjustment state. At this time, rotate the menu knob
to move between the specific time values.
· Language setting: Available in Chinese/English/
Russian/German/French.
· Memory card formatting: you can select formatting
memory card, select 'yes', memory card formatting,
select 'no', cancel the operation.
· Restore default: You can choose whether to
restore the default values. Select 'Yes' to restore all
parameters to factory settings; Select 'No' to cancel
the operation.
· About: Check the current device in the
16
GB CN DE FR RU
APP,ARM,MCU,FPGA version number and MAC
address.
· External ranging (cursor): the external ranging
cursor switch can be controlled.
NOTE: It shall be used together with optional
accessories.
· Remote control: After being turned on, it will search
for Bluetooth remote control connection. After
successful connection, all functions of the button
on the gunsight can be controlled by the Bluetooth
remote control (except the function required by long
Press).
NOTE: It shall be used together with optional
accessories.
· Ranging calibration: When the distance measuring
coordinate position adjustment port is entered, the
screen magnification is 1X by default. At this time,
the abscissa/ordinate can be adjusted by rotating
the menu knob or the zoom knob.
NOTE: It shall be used together with optional
accessories.
· Power display: When the thermal imaging camera
is turned on and the cell power level changes, the
power indicator will be displayed in the upper right
17
GB CN DE FR RU
corner of the screen, and the part with the power
indicator on will display the remaining power of the
cell.
· After the power-on screen enters the real-time
picture, the icon corresponding to the above power
level will be displayed in the upper right corner of
the screen. The electricity level is as follows:
HighpowerHighandmediumpower
MediumpowerMediumandlowpower
LowpowerExtremelylowpower
NOTE: When the power is low, please replace the
cell or charge it in time!
18
GB CN DE FR RU
- TROUBLESHOOTING -
1. Device fails to start.
Solution: Replace the cell or connect the adapter for
charging.
2. The device cannot take photos/record.
Solution: the internal storage space of the device is full,
format the memory card.
3. The device display time does not match the actual time
display.
Solution: Reset the time and date of the device in the
menu.
4. Screen goes out during use.
Solution: Short-press any button to wake up the
hibernation and light up the screen.
5. The image of the device is blurred during use.
Solution: turn the lens to focus manually until the display
is clear.
Table of contents
Languages:
