GXTSONIC CS-075 User manual

PORTABLE BLUETOOTH SPEAKER
CS-075

BUYER RECOMMENDATIONS
Unpack the device carefully.Make sure there are no accessories left in the box. Check up the
device for damage; if the products was damaged during transportation, address the firm
which carried out the delivery; if the product functions incorrectly, address the dealer at
once.
Shipping and transportation equipment is permitted only in the original container.
Does not require special condition for realization.
Dispose of in accordance with regulations for the disposal of household and computer
equipment.
APPLICATION
APM 571029 portable multimedia speaker system with Bluetooth and FM-radio is designed for
operation with PC,notebook and other mobile device by means of data transfer via Bluetooth
protocol. They can be also used in internet telephony, during video conferences, in multimedia
applications, in interactive games, for speech recognition and foreign language teaching. These is
a built in FM turner, and player with USB flash and with micro SD memory card.
PACKING CONENTS
Speaker system-1pc
3.5mm mini jack to 3.5mm mini-jack signal cable-1pc
USB to micro USB power cable-1pc
User’s Manual-1pc
SPECIAL FEATURES
Bluetooth wireless signal transmission
Track switching control possibility
Wired/wireless audio signal transmission
Built-in player with USB flash and with micro SD memory card
Built-in FM turner
Convenient retractable handle for carrying
Battery operation time up to 20hours
Radius of operation up to 10m
SPEAKER SYETEM DESCRIPTION
1LED indicator:Bluetooth/FM/Player/AUX
2:POWER button(long pressing)
3V-:Volume decrease
4V+:Volume increase
5M:Switch mode button:Bluetooth/FM/Player/Aux

6Microphone
7Previous track(in player mode):Previous station(in radio mode)
8Play/Pause(in player mode):Automatic scan of radio stations(short pressing in radio
mode)
9Next track(in player mode):Next station(in radio mode)
10 Receive/finish an incoming call button
11 Battery charge indicator
12 Micro SD card slot
13 Micro USB jack for connecting speakers to the charger,the USB port of laptop/PC
14 Aux:3.5mm mini-jack for audio signal connecting(Phone,MP3 player,etc.)
15 USB:USB flash connector
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
Connect speaker system to a USB port of PC or USB charger using micro USB to USB
cable(included).During battery charging the indicator is red.
The battery is used in the speaker systems as an integral part of the device,therefore do not
try extract or replace it,because this can result in the warranty cancellation or the device
damage.
OPERATION MODES
Bluetooth mode
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to

compatible devises.Maximum radius of action of data transfer is 10 m.Such obstacles as well as
or other electronic devices can interfere with the signal transfer.
Turn on the speaker system Bluetooth mode – press button
○
5
several time until the
indicator ○1will start blinking blue color frequently.
It is necessary to select the search mode of devices with Bluetooth on a signal
source(telephone,notebook,smartphone, etc.).“APM 571029”massage will be displayed on
the screen which is to be connected to*.
When connection is successful,there will be a short beep and the indication of search mode
speaker system is over**.
The indicator
○
1
blinks blue shortly during the data exchange with a device connected via
Bluetooth.
Radio mode
To improve radio reception,connect the cable 3.5mm mini-jack (included)to the AUX ○14 or
USB-micro USB cable (included) to the input○13.
Turn on the speaker system-press the button○5several times until,the radio mode will not turn
on.Short press the button ○8activates auto search mode. After scanning completion,the first
scanned radio station will start to operate automatically.With buttons ○7and ○9select a
desired radio station.
MP3 player mode
Attention ! The file system of a micro SD or USB flash carrier is FAT32. Maximum volume3 is 32
GB.It is not recommended to used the micro SD Ultra Speed.
Insert the USB flash or SD carrier int appropriate slot. If the speaker system is in turned on
position, the playback will start automatically. Playback /Pause modes are switched over
with the help of the button ○8.Tracks can be controlled by buttons ○7(previous track) and
○9(next track).
The use in the wired mode(AUX)
Speaker system can be used as an external device for amplifying any audio source with a 3.5
mm output mini-jack .To do this,connect a cable mini USB,plug 3.5 mini-jack to the audio
output AUX○14.
*You might have to enter “0000”code to connect some modes of devices via Bluetooth.
**If the item has been already registered in the device list of a source,then the search mode
activation or not obligatory.Choose the item name “APM 571029” and “connect”commend the
source

TECHNICAL SPECIFICATIONS:
Out power
5Wx2
Battery capacity, mA/h
1200
Power supply
USB/DC5
Cable lenght,m
0.5
Weight,g
840
Dimensions,mm
230x90x90
Radius of operation,m
Up to 10

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.